My latex file uses many packages which are imported with \usepackage.
On my local computer the packages are being correctly interpreted and the tex-file is compiled. When deployed on Heroku it stops running and I get plenty of error messages that some packages are missing.
For example: cmap.sty, etoolbox.sty, pdfx.sty, and many more. I started to add the files to my working directory. There are so many of them and it seems there should be an easier solution.
At the moment I am using a tex-live buildpack. I added the link to my Heroku build-packs, it does the job for simple latex files without any special packages required.
I created the file texlive.packages and added it to my repo. The file contains:
collection-bibtexextra
collection-fontsextra
collection-langgerman
collection-xetex
The deployment to Heroku is rejected because the slugfile excites more than 1.2G and only 500Mb are allowed.
These collections are quite big, and I can install max 2 of them.
I know that these collections containing a lot of packages I don't need.
How can I install only the required packages for my use case? Or how can I exclude some of them.
I built a project using Laravel 5 on my dev machine and now I'd like to deploy it.
One solution that came to my mind is to upload everything using FTP but I guess there is a better way.
I uploaded the composer.json but I receive tons of errors.
I have ssh/root access but using GIT is not an option.
Make sure you can use composer binary on your server and you are set
upload every file except vendor folder (you may use some FTPS manager that reads git-ignore file and does not upload ignored files)
set permissions to ./storage folder (browse thru this severfault thread)
make sure your web server root is ./public
create env file (that is not going to be changed ever, until you want) and do not overwrite it with "local" env file.
$ composer install (installs everything from composer.lock)
$ composer update (updates from repositories again, do test on local before updating on production)
Im developing a library hand in hand with a project I'm working on in L4 and I'm doing it in a Workbench as recommended. I have set the Service Providers etc and it works fine on my local machine. However when I pust to Pagodabox, the console gives me this:
Error Output: PHP Fatal error: Class 'Coderollers\Formidable\FormidableServiceProvider' not found in /var/www/vendor/laravel/framework/src/Illuminate/Foundation/ProviderRepository.php on line 123
Clearly, for some reason, on Pagodabox it is looking for my service provider in the vendors folder rather than the workbench folder. Does anyone know why this might be?
For a workbench package to be loaded by Laravel it expects to find an autoload.php file within a vendor directory of your package. You'll need to run composer install from your workbench packages directory to install the package dependencies and have it dump an autoload file.
Once done Laravel will be able to detect and use your package.
I installed the squirrel client 3.4.0 on my windows 7 64 bit machine.
I see a squirrel client settings folder
".squirrel-sql"
created in:
C:\Users\ayusman\
Is there any way I can specify the folder location to be in my squirrel install location i.e.
"C:\tools\dumps\Squirrel-3.4.0"
location?
The reason I want to do this is to make my squirrel set up easily movable between machines; I could just take the dump of the application and I will be ready to go on any machine.
Also is there a Squirrel-sql distribution that does not do the installation; but rather just a simple zip file that I can unzip to any location and start working?
About the local settings directory of SQuirreL:
SQuirrel SQL is an application written in Java and it uses the Java System Property user.home to store the local configuration files. Per default, this Java Property points to the home directory of the user. You can change this by the following steps:
Open squirrel-sql.bat in a text editor and navigate to the end of the file. One of the last lines should start with "start "SQuirreL SQL Client" - you have to change this line. Add -Duser.home=PathToStoreTheSquirrelConfigDir just after the -Xmx argument and ensure, that the new Argument is separated by a space from the others.
Here an example:
-Xmx256m -Duser.home=C:/temp -Dsun.java2d.noddraw=true
Note, that I use the slash and not a back-slash!
Now you can move the existing .squirrel-sql directory to the new place.
e.g C:\temp\.squirrel-sql
Now, if you start SQuirreL SQL, it will use the new storage location. You can verify this in the global properties of SQuirrel (see the section SQuirreL paths)
About the installer version of SQuirreL:
SQuirreL SQL also offers a plain zip instead of a installer version. Here is the link to the latest stable version
SQuirreL is offering 3 packages (base, standard, optional). The difference between them are the packaged plugins. I use the optional package - but the standard package is also fine.
You can use the Squirrel-Parameter --user-settings-dir, but unlinke the other answer with -Duser.home you have to use the actual Squirrel-Settings-Directory, e.g. the one with all the xml-Settings files and the folders logs and plugins.
You can use that parameter on the .jar / main-class directly, but also on the squirrel-sql.bat or squirrel-sql.sh file, so you don't need to edit those.
Example:
C:\dev\squirrel-sql\squirrel-sql-3.9.0\squirrel-sql.bat --user-settings-dir=C:\dev\squirrel-sql\squirrel-sql-settings
This is from the Squirrel-Manual, strangly enough, i couldn't find an online-source for it (only an outdated one), buts inside the squirrel installation folder, e.g. squirrel-sql-3.9.0/doc/quick_start.html
On Windows you can make whole settings directory portable using argument --user-settings-dir "%CD%\settings" in the link to .bat file.
Thus in the Target of your link you will get something like this:
"C:\...\squirrelsql\squirrel-sql.bat" --user-settings-dir "%CD%\settings"
I've been looking all over for decent instructions on how to get hgweb working on IIS but I haven't found much of worth.
There's this "step by step" on the Mercurial wiki, but it's not very good.
There's also this and this, but again, I can't find good steps to lead up to where those get started.
I just had to install a fresh Mercurial instance yesterday, here's updated instructions for 1.7:
Install Mercurial (these instructions were tested with 1.7)
Install Python (for Mercurial 1.7, you must use the x86 version of Python 2.6.6)
You will need to download the hgweb.cgi file from the Mercurial source. You can download the source by running: hg clone https://www.mercurial-scm.org/repo/hg/
Create a folder that will be your web application folder. You will need to copy three things into this folder:
The hgweb.cgi file
The contents of the Library.zip from your "C:\Program Files\Mercurial" folder
The Templates folder from your "C:\Program Files\Mercurial"
You will need to make sure you have Python set up in IIS.
Enable CGI via the following: Control Panel -> Turn Windows Features On or Off -> Roles -> Web Server (IIS) -> Add Role Services -> Check CGI
Create a new Web Site in IIS and make sure the physical path is the folder you created above
In the Handler Mappings for the new website, select "Add Script Map". Enter *.cgi for the request path, c:\Python26\python.exe -u "%s" for the Executable, and Python for the Name.
You will also need to create a file named "hgweb.config" with contents similar to below. The path within the file needs to be the location on your drive where you want to store the Mercurial repositories:
[collections]
c:\Mercurial\repos = c:\Mercurial\repos
Edit the hgweb.cgi file and change the line where it sets the path to your hgweb.config to something like the following (wherever the hgweb.config file is):
config = "C:\Mercurial\hgweb.config"
Now, open a browser and navigate to http://localhost/mercurial/hgweb.cgi (or whatever is the appropriate URL path you set up in IIS) and you should see the Mercurial Repositories page.
Also, check out Jeremy Skinners blog post . It's a little outdated, but has some extra nice steps like setting up URL re-writing for cleaner URL's.
It seems since Mercurial 1.5.2 was released, these tutorials don't work exactly right. For one thing, hgwebdir.cgi has been removed, and is now replaced with hgweb.cgi.
The instructions that worked best for me is at eworldui.net:
http://www.eworldui.net/blog/post/2010/04/08/Setting-up-Mercurial-server-in-IIS7-using-a-ISAPI-module.aspx
Those instructions are meant for IIS 7 or greater. If you're setting this up on IIS 6, I wrote up similar instructions geared toward Win2k3 and IIS 6.0:
http://partialclass.blogspot.com/2010/05/setting-up-mercurial-server-on-win2k3.html
UPDATE: Shortly after getting this working I learned that BitBucket changed their pricing scheme to offer free, unlimited, private hosting: https://bitbucket.org/. I would've opted for that in a heartbeat when I was originally working on this project.
Below are what I did after doing a fair amount of research for geting hgwebdir.cgi setup on IIS6 . It is based on the following sites:
http://python.markrowsoft.com/iiswse.asp
http://www.jeremyskinner.co.uk/mercurial-on-iis7/
You'll need to install the following on the server:
Mercurial (I used version 1.5)
Python 2.6. The version of Python depends on the version of Mercurial installed.
Mercurial 1.5 uses Python 2.6. Install x86 even if you are running x64.
The steps for me were:
Create a directory for the website. I used c:\inetpub\wwwroot\hg.
In IIS, right click on the folder for hg, select properties, select the Home Directory tab.
Click on the Create application button. Set the execute permissions to "scripts".
Still in the Home Directory tab, click on the Configuration button. In the "Application Configuration" popup, click the Add button to add an application extension. The Executable is c:\Python26\python.exe -u "%s" "%s". The extension is .cgi. Set the "verbs" to "limit to: GET,HEAD,POST". Check both Script engine and Verify that file exists.
In the Directory Security tab, click on the Edit button in the Authentication and access control section. Uncheck all authentication methods, and check the "Basic authenication" method. Set the Default domain if you like to your Active Directory domain.
In IIS, click on the Web Service Extensions folder on the left panel. Click on "Add a new Web service extension" link. Extension name should be Python, the required file is c:\Python26\python.exe -u "%s" "%s". Make sure the new extension is "Allowed".
Now is a good time to test that Python is working. Create a file in your new Hg folder called test.cgi. Paste the following python code:
print 'Status: 200 OK'
print 'Content-type: text/html'
print
print '<html><head>'
print ''
print '<h1>It works!</h1>'
print ''
print ''
Open the browser to your site, for instance, http://localhost/hg/test.cgi
You should see "It works!" in the browser.
Next let's get the hgwebdir working.
Delete test.cgi
clone the hg repo to a new directory: https://www.mercurial-scm.org/repo/hg/
copy hgwebdir.cgi to your web directory: c:\inetpub\wwwroot\hg\ from the cloned hg repo
Edit the file and change
application = hgwebdir('hgweb.config')
wsgicgi.launch(application)
to
application = hgwebdir('c:\inetpub\wwwroot\hg\hgweb.config')
wsgicgi.launch(application)
Unzip the Library.zip file in the Mercurial directory, c:\Program Files\Mercurial\, to your web directory, c:\inetpub\wwwroot\hg\
Copy the templates directory from c:\Program Files\Mercurial\templates\ to c:\inetpub\wwwroot\hg\templates\
Create a file called hgweb.config in your web directory.
Now is a good time to test it out. Go to the following URL in the browser, http://localhost/hg/hgwebdir.cgi
Edit hgweb.config, and paste the following:
[collections]
\\server\share$\Hg\ = \\server\share$\Hg\
[web]
allow_push = *
push_ssl = false
These are all my preferences, for instance we have our repos in subdirectories at \\server\share$\Hg. The web app will run under the permissions of the logged in user via the browser, so they'll need read/write permissions to the share.
The last step is to allow for long connections which can happen when you first clone a repo. Run the following command to increase the timeout to 50 minutes:
cd \inetpub\AdminScripts\
cscript adsutil.vbs GET /W3SVC/CGITimeout
cscript adsutil.vbs SET /W3SVC/CGITimeout 3000
Use mercurial to clone the mercurial repository:
hg clone https://www.mercurial-scm.org/repo/hg/
you will find hgwebdir.cgi at the top level. It should install
like any other cgi script.
I've been fighting with this setup for mercurial 1.7.2 for the past week or so, I had to do things slightly differently than the above articles do in order to get it working.
Posting here because google kept bringing me back here....
Full instructions posted here
I followed a combination of these instructions and these (in the source)
The main differences are that I had to do the "pure python" install of mercurial otherwise it would complain about missing dlls, and I found it was important to use the "python installers" for pywin and isapi-wsgi. (maybe this is obvious to experienced python developers, but I'm a python newbie so it was news to me)
Hope this helps somebody and I'm not just making stuff up (I might be, like i said, python newbie)
The hg red book contains some much better general instructions than I've seen in other places. They are not IIS specific, but they are quite good:
http://hgbook.red-bean.com/read/collaborating-with-other-people.html#sec:collab:cgi
I was running into a "...can not load module..." type error and after some reading, the key for me was to ignore the Library.zip file in the Mercurial folder, and instead use the one from C:\Program Files (x86)\TortoiseHg folder.
That tip I found as #6 in this guide:
http://www.endswithsaurus.com/2010/05/setting-up-and-configuring-mercurial-in.html
Hope this helps someone...
I know this is an old question, but I really struggled getting Hg installed on Server 2019 and IIS 10.
Here is what I did to get it working:
Install Python 2.7 which in my case was python-2.7.18.amd64.msi. I will assume it's installed in C:\Python27. Make sure python is added to your path and that pip is installed.
Install Mercurial as a module using pip at the command line:
pip install mercurial
Under Default Web Site add a new application called hg and point it to the directory you want to use to use.
Configure Python as CGI handler in IIS 10.0 for this new website (or the entire web server if you wish). You can do this manually or create/add the follwing to your web.config file:
<system.webServer>
<handlers accessPolicy="Read, Script">
<add name="Python 2.7" path="*.cgi" verb="*" modules="CgiModule" scriptProcessor="C:\Python27\python.exe -u "%s"" resourceType="File" />
</handlers>
</system.webServer>
In the 'hg' application folder create a hgweb.cgi that looks similar to the following:
#!/usr/bin/env python3
#
# An example hgweb CGI script, edit as necessary
# See also https://mercurial-scm.org/wiki/PublishingRepositories
# Path to repo or hgweb config to serve (see 'hg help hgweb')
config = "hgweb.config"
# Uncomment and adjust if Mercurial is not installed system-wide
# (consult "installed modules" path from 'hg debuginstall'):
# import sys; sys.path.insert(0, "/path/to/python/lib")
# Uncomment to send python tracebacks to the browser if an error occurs:
#import cgitb; cgitb.enable()
from mercurial import demandimport
demandimport.enable()
from mercurial.hgweb import hgweb, wsgicgi
application = hgweb(config)
wsgicgi.launch(application)
In the 'hg' application folder create the hgweb.config file and point it at your repos like the following:
[collections]
C:\Web\www\hg\repos\ = C:\Web\www\hg\repos\
Navigate to http://localhost/hg/hgweb.cgi and enjoy!
You can try HgLab. This isn't exactly hgwebdir; rather it is a purely managed Mercurial implementation with push and pull server and repository browser.