the black screen
So, long story short, code blocks got corrupted or something like that last week, i didn't find the solution online or here but, i managed to see that somehow the code blocks didn't work while it wasn't working while in local desk (C) - because i tried to install it on an other local desk and it worked fine today - but when i came to use code blocks tonight and did everything i needed to do and built it and now i am going to run the code, the black screen shows but doesn't take INPUT OR GIVES OUTPUT, NOTHING. just like it froze.
didn't find a solution for that problem and i really hope i find it here.
Related
I would really appreciate some help here or at least an indication of where to post this.
After unsuccessfully trying to make my programs run on e2studio, I installed GCC ARM compiler, and it made the program build successfully.
However my fast windows 10 computer is totally slow. It is unresponsive a lot of the time, it can not open any office anymore (in the task manager I can see they are running). The screen sometimes goes black. And mainly file explorer takes a lot of time to do the simplest of things. (it seems as any action takes a lot of processing)
In other words, I can't work normally in my computer anymore since I installed this compiler.
My disk resources are ample. No problem there.
I am trying to savage all my work somehow since backing up now takes a lot of time
Any help would be greatly appreciated please. If you believe this does not goes here, instead of downvote me please help me redirect my problem to the appropriate place
There is a question here about this already (though,short of re-installing Windows, which I'm obviously trying to avoid, the other solutions don't work for me), but I have some research to add, and a possible solution... which I don't understand, but perhaps someone here is able to shed light on how to implement it? I'm using Visual Studio 2015 Community on Windows 10 Pro x-64 with Anniversary Update (and latest cumulative update).
There is a possible work-around - details at https://social.technet.microsoft.com/Forums/windows/en-US/2f51398c-cef2-4686-9505-904d3f71ef6d/windows-10-applocker-packaged-app-white-list-blocks-store?forum=win10itprogeneral - where the resolution is to allow all Windows App Store apps, however no steps are given, so I don't know how to do that.
There is a relevant hot fix at https://support.microsoft.com/en-gb/kb/2719305, however that is targetting an older version of Windows, so I'm not sure of the repercussions of trying that. I'm leaving that as my last resort short of re-installing.
And finally, there is re-installing, as per the other thread on here, as the Anniversary Update is considered the suspect (and I'm past the rollback window). I already had the AU when I first tried UWP, so I never had it working to begin with to know if this is the culprit or not. I have never touched applocker myself (had never heard of it) - I have this problem out of the box.
Apart from the time involved, I don't want to re-install as there has been mixed success with it - for one person it fixed it, for another it fixed it initially but the problem came back. I am trying to get a permanent fix (and only re-install if I can't find one).
Anyone know a permanent fix for this? Or how to implement the first suggestion? Or implications of the second?
P.S. for the sake of completeness (and to pre-emptively answer this question), one of the things I already tried is the MS trouble-shooter for this issue (I think I found this one on MSDN from memory). It suggested using my MS login instead of my local user, and to change the temp environment variables back to default (I had them pointing to RAMdisk), but doing those things failed to fix the issue.
Well, I ended up re-installing Windows, having corrupted it along the way, and that ended up fixing the issue. I found along the way that the problem actually stops ALL apps from the store installing (I never did find out how to implement the store fix I mentioned in my question), and that provides a quick way to see if the problem is fixed (rather than trying to build/deploy your UWP app each time you think you've fixed it, just try installing a store app).
I did find something that MAY be a solution, at https://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/this-app-wasnt-installed-error-0x80073cf9/92ec7c44-51ef-4c6a-9331-22958e01b4ec?page=1, which relates to how to recover from a corrupted user profile (I'm not being allowed to upload a snapshot of the relevant reply due to still being relatively new here. Sigh) - which I now believe to have been the cause - however I didn't get to try it out as I'd already corrupted Windows at that point. Note that none of the other solutions in that thread worked for me, so I would start with this one first, as the other solutions only worked for some people. If you have this problem then I would try that first before re-installing.
P.S. at one point it looked like the Anniversary Update may have caused the problem, however after I re-installed I tried before applying the AU, and then again with the AU, and it kept working afterwards,so that was NOT the culprit. It was the user profile/Windows being corrupt.
I have come across a wierd vis studio error which only had one other question I could find that is Similar.
When I try to debug the code I hit run and it says there are errors would I like to run the last working version to which I say no. This then comes up with 91 errors which slowly disappear until there are none left.
This may be quite hard to understand what is actually going on, so I have recorded it to make things a bit easier.
Link to video
I have no idea what is going on and cant seem to find anything other than that other question, which the guy did solve but the next day he turned on his computer the same thing happened, I don't want to be fixing this everyday.
Any Suggestions would be great!
Thanks
All fixed now, I still have no idea what was wrong with it. I just deleted it all and pulled it back down from TFS and it worked, it is a bit of a strange one.
I wanted to install Code Combat locally to be also able to understand it better. I have followed the steps (for Mac OSX, I have Yosemite) described at: https://github.com/codecombat/codecombat/wiki/Developer-environment
Everything worked. I have all the scripts running, without problems, mongo is up and running, the game is starting, but then, the game itself can't be proceeded.
I haven't restored the mongo dump, which is 2GB fat and which I can't download easily with my current internet connection, but it seems to be optional.
Looking on the console, I have a couple 404 that I can't explain, see below. If somebody could help me to get the game running locally, I would be very grateful.
GET /db/thang.type/529ffbf1cf1818f2be000001/version 404
GET /db/level/dungeons-of-kithgard/session 404
As well as the mp3 files, which I am fine not to have.
Thanks in advance,
Matthieu
PS: I would have liked to specify more tags, but as it concerns many languages and doesn't have a specific tag, I didn't know which one to add
OK, it's mandatory to have a mongo dump to have the base elements for the levels. But 2GB is too much and a solution will attempt to be found to be able to export only the required data. 200MB should be enough
UPDATE: With the following ticket being implemented, the size is reduced to less than 100MB: https://github.com/codecombat/codecombat/issues/1988
Ever since I started using Xcode, I've experienced extremely annoying problems with Code Sense. The problem is that when Code Sense kicks in for code completion, sometimes the source code text below the line I'm working on goes "crazy". If I continue typing, the problem gets worse, and after a while the source code is completely screwed up (funny colors, missing lines and characters, ...). Strange enough, the source code itself is unaffected, because when I select another source file and then go back to the one I was working on, everything looks fine again.
The problem can be seen in this screencast: http://www.screencast.com/t/OGY3NWE5
Interesting facts:
This problem has occurred on 3 different machines, so it's not related to a corrupt installation.
Sometimes it's fine for a while (up to one hour) after launching Xcode, but once it starts happening, it's getting worse and worse, until Xcode is restarted. Then it's fine again (for a while)
I've searched the web for similar experiences, and I can't find anything. I would think that it is a known problem, since it occurs on 3 different Macs here (both running 10.5 and 10.6).
Anyone having the same problems? Or a suggestion for fixing this?
Yeah, it can be a real pain. I didn't find a 'fix for it as such, but I do a quick switch from implementation to header (or vice versa) and then back again using Command-option-up. The screen redraws and everything is fine again
Well, I finally (kind of) fixed this problem by simply turning off Quick Help. Previously, I left this on all the time, and it resulted in a very unstable code sense (to the point where Xcode simply became unusable).
This is not a real solution, but it should at least help people experiencing the same issue.
I wrote about it here
My issue was with localization. if your XIB file is localized using xcode 4's, then it was failing for me. removing the localization worked, though not a proper solution.