I downloaded Clamwin source code and loaded the clamwin solution to visual studio(2010 professional) and successfully built all project without any errors. After clicking start without debugging(seting clamscan project as startup ) I'am getting bellow error on cmd-prompt.
LibClamAV Error:cl_load:No such file or directory: C:\Users\my-pc\Desktop\clamav-win32-clamav-0.99\contrib\msvc\Debug\Win32\db
-----------SCAN SUMMARY-------------
Known viruses: 0
Engine version: 0.97.8
Scanned directories: 0
Scanned files: 0
Infected files: 0
Data scanned: 0.00 MB
Data read: 0.00 MB (ratio 0.00:1)
Time: 0.003 sec (0 m 0 s)
Press any key to continue . . .
I searched solution online and I got Clam is looking for it's database files and the directory doesn't have them, doesn't exist, or Clam doesn't have sufficient rights to access the files.
But how should I solve this? should I create file or directory in that path or should I make it find itself?
Just run freshclam -> downloads fresh vc db to predefined dir (DatabaseDirectory in freshclam.conf). Before you do this, you must set up the freshclam.conf.
Then set up the same DatabaseDirectory in clam.conf.
(There was a bug here for me. I was installing on Windows and used forward slashes all over the config files as dir delimiter of path. At DatabaseDirectory value i had to change my forward slashes to backslashes to be able to run clamdscan successfully)
Finally, try run clamscan.
Please, tell me, if it did not help.
As specified in question Clam is looking for it's database files and the directory, directory /db should be updated with database by Running the freshclam tool,to run freshclam(if there is an Error), download the freshclam.conf file and edit the file as required.Then click on start debugging from the debug menu. Clamscan scans current working directory. For more information on clamscan
Related
I'm running a job with Pentaho Data Integration 8.1, I retrieve a file frop ftp, work on it and move it to a folder.
I tried, as I did many other times with no problems, to use 'Move Files', but I get this error:
Move Files - ERROR (version 8.1.0.0-365, build 8.1.0.0-365 from 2018-04-30 09.42.24 by buildguy) : There was an error moving file [file:///C:.../file.csv] to [file:///C:.../file.csv] : [Could not rename "file:///C:.../file.csv" to "file:///C:.../file.csv".
I checked permissions on the file and on the destination folder, everything's fine.
I tried to use "Process result filenames" step with no success.
I tried to rename or delete the file instead of moving it, same error.
I tried to move this job into a new parent one, with "Move Files" step in it, same error again.
I also tried not including the filename to result prior to the Move Files step: nothing.
Then I wrote a simple shell script:
cd\
cd C:\...\working_directory
move "filename with spaces.csv" /destination_folder
and I get this (I translated it from italian):
ERROR (version 8.1.0.0-365, build 8.1.0.0-365 from 2018-04-30 09.42.24 by buildguy) : (stderr) No access to the file. The file Š is used in another process.
The file isn't used in any other process, I can move it manually without the spoon process running, so I think the ftp step, or the transformation one I use to work on the file (simple 'CSV Input' and ETL) somehow keep the file open.
Any idea as to how to "unlock" the file, so that it can be moved?
I followed all the instruction mentioned in https://github.com/cisco/openh264 but I am unable to get through. The information is cited in link but its quite confusing.
Alternative Way:
You can build Openh264 using visual studio in windows. Here are the steps..
i) Download OpenH264 source code provided by cisco (that already you
mentioned https://github.com/cisco/openh264).
ii) Now you will find two visual studio compatible projects in
directory /OpenH264/codec/build/win32/dec and
/OpenH264/codec/build/win32/enc.
iii) You will need to download NASM software from http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/
iv) Install NASM software on the directory C:\NASM or wherever you like.
v) Then Add NASM executable path to all these visual studio projects.
vi) Then You can either select static or dynamic library in general
options.
vi) If you are able to perform all these operations successfully, you will have 5 different .lib or .dll files named welsdcore, welsdecplus, welsecore, welsencplus, welsvp and those
are usable in any visual studio projects.
Now if you want to get openh264 features, just add all these libraries to your project and enjoy.
Hope it will help you.. :)
I also had some difficulty building openh264 on Windows using the recommended mingw approach.
In my case make crashed for all configurations I tried:
bash -c "make OS=msvc ARCH=x86_64 USE_ASM=No BUILDTYPE=Debug clean"
bash -c "make OS=msvc ARCH=x86_64 USE_ASM=No BUILDTYPE=Debug"
0 [main] make 3888 handle_exceptions: Exception: STATUS_ACCESS_VIOLATION
564 [main] make 3888 open_stackdumpfile: Dumping stack trace to make.exe.stackdump
0 [main] make 5448 handle_exceptions: Exception: STATUS_ACCESS_VIOLATION
561 [main] make 5448 open_stackdumpfile: Dumping stack trace to make.exe.stackdump
copying dll files to destination folder...
FullDestDir is E:\projects\openh264\bin\x64\Debug
current dir is:
E:\projects\openh264
DestDir is bin/x64/Debug
cp: cannot stat `openh264.dll': No such file or directory
cp: cannot stat `openh264.lib': No such file or directory
cp: cannot stat `openh264.pdb': No such file or directory
cp: cannot stat `codec_unittest.exe': No such file or directory
cp: cannot stat `h264enc.exe': No such file or directory
cp: cannot stat `h264dec.exe': No such file or directory
BuildDebugFlag =1
BuildReleaseFlag =0
BuildDebugInfo ="build debug--failed"
BuildReleaseInfo =NULL
aBuildFlagList is 1 0
ReturnCode is 1
I resorted to converting the existing solution/projects (VS2008) to VS2013 and linking/building with the created .lib files.
You can find the solutions in {openh264_dir}\codec\build\win32\enc and {openh264_dir}\codec\build\win32\dec.
Building the solution will create .libs and .dlls in {openh264_dir}\bin\Win32\Release
To link to the lib, you need to link to welsenc.lib.
When running, you need to have both the welsenc.dll and welsvp.dll in your application directory. So far it seems to have worked fine for my usage.
I'm assuming that building the decoder will be similar.
I am creating setup of large data approximetly 10 GB with NSIS Script and trying to create a single setup (exe). Its giving an Error -
Internal compiler error #12345: error mmapping file (xxxxxxxxxx, xxxxxxxx) is out of range.
Note: you may have one or two (large) stale temporary file(s) left in your temporary directory (Generally this only happens on Windows 9x).
Please tell me how to solve this issue ?
Is there any other way to create a setup for this kinda situation ?
NSIS installers are limited to 2Gb.
If you absolutely need it to be one file and you want to continue to use NSIS you have to append the data to the end of the generated setup. I'm not sure I would recommend that approach but it could work if the appended data is a zip file (or some other format with the header at the end) and you use one of the NSIS zip plugins to extract at run-time...
I have used https://sourceforge.net/projects/nsisbi/ instead of normal NSIS. It solved the problem.
I was using Silent Install Builder 5 and received this same error with a package installer that had LESS that 2 GB total. Once I determined that the NSIS compiler was to blame, I began experimenting with several possible solutions and here's what worked: I downloaded the newer NSISBI compiler from here https://sourceforge.net/projects/nsisbi/ and then did these 3 steps:
Go to C:\Program Files (x86)\Silent Install Builder 5 and renamed the default NSIS folder to a new name.
Copied the NSISBI folder into the C:\Program Files (x86)\Silent Install Builder 5 directory and renamed IT to NSIS.
Tries to compile some large packages above and just below 2GB and the first few tries I would get missing file errors in the Silent Install Builder 5 compiling box. No worries because the missing files are in the old NSIS folder, that's why y9u don't delete it.
Each time find the missing file error displays, find the missing files and copy them into the same folder location in the new NSIS folder. About 3 times you will do this until there are no more errors at all and you can then include the large files without generating the "internal compiler error #12345: error mmapping file xxxx is out of range." error message. NSISBI works!
Recently, I got error
Warning: require_once(account_header.php): failed to open stream: No
such file or directory in
/home/contestium/dev/temp/dev.contestium.com.tpl.0oyr4na on line 1
Fatal error: require_once(): Failed opening required
'account_header.php' (include_path='.:/usr/share/pear:/usr/share/php')
in /home/contestium/dev/temp/dev.contestium.com.tpl.0oyr4na on line 1
I have disabled caching with
F3::set('CACHE',FALSE);
But it was not helpful for me. Any help will be appreciated. Thank you!
When using cached files, your relative path won't work, as the cached files are not in the original file's directory.
You'll either need to provide the full path to 'account_header.php', or add the path to the directory containing such to your include path. This can either be done in your php.ini file, or at [runtime][1].
It looks like the cached files are still being used, right? If you delete those files, will it fetch the original file (and not the cached files)?
I created an app that plays a sound when you press a button and it was working fine initially. I'm not sure what happened, I deleted one of the files and now xcode keeps giving me a warning in reference to a file Not being found. I've deleted and recreated the file, commented out the code using the file, and cleared but build but nothing seems to be working. I'm new to xcode and app development. Here's the errors I keep getting:
Check dependencies
[WARN]Warning: Multiple build commands for output file /Users/adrienneiverson/Library/Developer/Xcode/DerivedData/SpeakUp1-aoakahingahxuwfhopwfckqlxewc/Build/Products/Debug-iphonesimulator/SpeakUp1.app/Bye.mp3
Warning: Multiple build commands for output file /Users/adrienneiverson/Library/Developer/Xcode/DerivedData/SpeakUp1-aoakahingahxuwfhopwfckqlxewc/Build/Products/Debug-iphonesimulator/SpeakUp1.app/Bye.mp3
CpResource ../../Sounds/Mp3/Bye.mp3 /Users/adrienneiverson/Library/Developer/Xcode/DerivedData/SpeakUp1-aoakahingahxuwfhopwfckqlxewc/Build/Products/Debug-iphonesimulator/SpeakUp1.app/Bye.mp3
cd "/Users/adrienneiverson/Desktop/SURE PROGRAM 2011 - GA TECH/SpeakUp1"
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin"
builtin-copy -exclude .DS_Store -exclude CVS -exclude .svn -exclude .git -resolve-src-symlinks "/Users/adrienneiverson/Desktop/SURE PROGRAM 2011 - GA TECH/SpeakUp1/../../Sounds/Mp3/Bye.mp3" /Users/adrienneiverson/Library/Developer/Xcode/DerivedData/SpeakUp1-aoakahingahxuwfhopwfckqlxewc/Build/Products/Debug-iphonesimulator/SpeakUp1.app
error: /Users/adrienneiverson/Desktop/SURE PROGRAM 2011 - GA TECH/SpeakUp1/../../Sounds/Mp3/Bye.mp3: No such file or directory
error: /Users/adrienneiverson/Desktop/SURE PROGRAM 2011 - GA TECH/SpeakUp1/../../Sounds/Mp3/Bye.mp3: No such file or directory
I have no idea what multiple build commands they're talking about and the file is located in the directory that they're saying its not in...I'm lost....
Have you cleared the build folder?
Or is that what you meant by I've deleted and recreated the file, commented out the code using the file, and cleared but build but nothing seems to be working.?
Tjeu