In JMeter, I have been experiencing "Response too large to be displayed. Size: 443216 > Max: 204800" error in the response data most often.
Is there any way to get rid of this response?
I tried adding view.results.tree.max_size=0 in user.properties file but still the same issue.
Do I need to add "#view.results.tree.max_size=0" in user.properties file? or "view.results.tree.max_size=0" is fine?
Or can this response be ignored?
If you have not restarted Jmeter after making the change, restart it and the changes will take into effect.
Related
I did record with blazemeter a test.
Now it is giving me this error The resource you are looking for has been removed, had its name changed, or is temporarily unavailable. at the favicons.
Is there a way to exlude it from the jmeter script?
Or what is another solution?
If the favicon is a separate HTTP Request sampler - add a Response Assertion to it, tick Ignore status box and set the expected response code to the actual one
If the favicon comes with the "embedded resources" you could add the next line to user.properties file:
httpsampler.ignore_failed_embedded_resources=true
and after JMeter restart the problem should go away
Getting Error Failure msg: html assertion can't parse argument number
Http Request: www.google.com
It's sounds like a bug in JMeter you should report it via JMeter Bugzilla
In the meantime if you need to use HTML Assertion you can downgrade to JMeter 5.3
I faced the same issue,
Just increase the warning threshold, in my case, more than 60 worked well.
And if you also want to see the warnings, create a text file, and add path in File name as shown in the screen shot below:
You will get all the warnings listed in the txt file that you have created. and at the end of file it will tell you how many warnings are there, just set warning threshold more than that.
Hope it works.
Jmeter 2.12.
I used a scenario fully functional in front of a reverse proxy Apache. Recently we 've replaced the reverse proxy with the F5 BIGIP technology and now my scenario hangs.
The problem is for a particular ajax POST request the HTTP response is truncated : i receive a 200 OK but the HTML content is not full (no html tags for example). When i post the same request with Firefox the full content is ok.
Note that i don't receive the http header Transfer-Encoding: chunked.
In this case what can be the difference between Firefox and JMETER ?
Anyone have an idea on how could i get the full html response ?
Thanks for any reply.
That completely depends on the settings on your F5 and what exactly you mean with "response is truncated" and "no html tags". Do you get the correct response but the html tags are stripped out? or is the response just truncated so you i.e. only get the first n bytes?
The best way to find out what is actually going wrong is to use something like fiddler in between and try to find the real difference between the responses, especially regarding the response headers (Content-Length, Transfer-Encoding, etc).
When you found the actual difference please post here so we can help you further.
On a sidenote, by any chance do you have some custom coding on the f5 (iRules) which react to different user-agent settings?
Given you send identical requests you should be receiving identical responses.
Use JMeter's View Results Tree listener to inspect request details, or even better compare requests which are being sent by Firefox and JMeter using a lower level network sniffer tool like Wireshark, detect the differences and configure JMeter accordingly to send the same request(s) as Firefox does.
The other reason might be JMeter truncating large response, by default JMeter displays "only" first 10 megabytes in the View Results Tree listener, if this is the case - you can add the next line to user.properties file:
view.results.tree.max_size=0
and restart JMeter to pick the property up - it will suppress response truncation and you will be able to view the full response data.
Alternative way of setting the property is passing it via -J command line argument like:
jmeter -Jview.results.tree.max_size=0 ....
References:
Full list of command-line options
Apache JMeter Properties Customization Guide
Facing the issue while developing the performance script for salesforce application. The issue is, one of the apexremote post call is too large in size. Jmeter is getting hanged if i am trying to click that particular request. Even if I manage to enhance the post request somehow the cursor is not going to end of the line. Hence at the end of the line there is one CSRF which I am not able to correlate. This is only happening for only one apex post request. Because of this my orders are getting rejected while provisioning. I tried by increasing my heapsize in jmeter.bat file but no help.Searched in google but didn't find related queries. I tried the same thing with neoload and I was successfully access and enhanced that particular request.
Has anyone experienced ever! How to resolve this.
Please HELP!
1.Basically for that you need to be Patience after clicking on the request and when the request populate properly copy that post data into notepad++for correlation purpose.
2.Or other solution is Open the .JMX directly into notepad and from there copy the post data into other notepad++ instance and form there with some manipulation you can do correlation.
3.Hope you already changed the property "view.results.tree.max_size=0" in "jmeter.properties" file because may be for next correlation you will get the message like "Response data is to Large".
I had also faced the same issue several times in past, so in that case just copy the complete post body and paste it into notepad++ and modify the content there instead of modifying in jmeter itself, then paste the content back to jmeter and execute it.
This will resolve your issue but have patience while clicking on http request to copy the post body because it'll take some time to open the request properly
I have found out the solution for the very big request for which meter is getting hanged. The best solution is to take the request from the html body of the view result tree listener for the recorded original one and paste in the payload of a new sampler. Then add it in appropriate place accordingly. We can also keep a raw request and make the correlation changes there itself instead of messing around in the big request payload.
I attempted to record a file upload in JMeter, using port 8888, but the file failed to upload when using JMeter as the proxy ( Recording Controller and HTTP(S) Test Script Recorder ). I also tried to run this from within JMeter by choosing "Start" and viewing what I had just recorded in the View Results Tree listener. When I ran it this way, I received a 500 error for the file upload line in the View Results Tree listener.
So, I ran Charles network proxy while doing the file upload to see if the same thing happened. It did not. I was able to successfully upload the file going through the Charles network proxy on the same port 8888.
Furthermore, I took out all proxies and did the file upload successfully.
Only when I use JMeter as the proxy do I have a problem uploading the file.
In JMeter, after first running it with no changes, I then tried to change many settings like Implementation, Content Encoding, Browser-campatible headers, Retrieve All Embedded Resources, and many others to see if this would help, but it did not.
So, my gut tells me that there is a setting that is set incorrectly.
I found this post that talks about changing to use "Java" in the HTTP Request Defaults. ( Unable to upload image/file when using Jmeter HTTP Proxy server ) This did not help me though when I tried that.
I found this post also which mentions some other types of things ( Unable to record an upload file scenario in JMeter though it is possible by manual effort with specific browser settings ) . I did check the headers against Charles and they look the same.
Any ideas?
============= Edit below is adding the test plan screen shot===============
During recording you need to put the file you want to upload in jmeter/bin folder.
This is due to some limitations of browsers which do not transmit the full path.
So, apparently, I had to remove the parameters from the "Path" line and move them to the "Send Parameters With the Request:" for the line that I had the 500 error on ( the highlighted line in the screen shot I had attached above ).
In summary, here is what happened. When I recorded the file upload with JMeter using the Recording Controller and HTTP(S) Test Script Recorder, JMeter had put all of the parameters in the "Path" field for me on many of the lines that JMeter had recorded for me. I did not even think twice about what JMeter had done automatically for me. So, after I removed all text except "/" in the "Path" field and added each parameter one at a time under "Send Parameters With the request", I received a "200" status code on the line that had given me the problem. I also went into all other lines and made these same changes for the parameters. I still am not sure if the file upload is actually working, but I don't care about that right now since I did get a "200" on the line that was giving me a problem. That is enough progress to keep me moving ahead... :-).