I am installing Janus WebRTC Gateway in a Ubuntu Machine (14.04 64 bit). I followed the instructions as in the following link:
However, I get the following error when trying to execute janus:
https://github.com/meetecho/janus-gateway (readme.md file)
[FATAL] [janus.c:main:3670] No Janus API transport is available...
enable at least one and restart Janus
Anyone has any idea what the issue might be? I will only use the REST API without WebStockets or RabbitMQ.
I successfully installed Janus on Ubuntu 14 according to the following steps:
sudo apt-get install libmicrohttpd-dev libjansson-dev libnice-dev libssl-dev libsrtp-dev libsofia-sip-ua-dev libglib2.0-dev libopus-dev libogg-dev libini-config-dev libcollection-dev libwebsockets-dev pkg-config gengetopt automake libtool doxygen graphviz git cmake
sudo apt-get install libavformat-dev
mkdir -p ~/build
cd ~/build
git clone git://github.com/meetecho/janus-gateway.git
cd janus-gateway
sh autogen.sh
./configure --disable-data-channels --disable-websockets --disable-rabbitmq --disable-docs --prefix=/opt/janus LDFLAGS="-L/usr/local/lib -Wl,-rpath=/usr/local/lib" CFLAGS="-I/usr/local/include"
make && sudo make install
sudo make configs
Running it by:
cd /opt/janus/bin/
./janus -F /opt/janus/etc/janus/
I had this issue before, I had write a script to install everything just run this
wget https://gist.githubusercontent.com/johnmelodyme/966f474a99b6dd0cf4e7ac19ba4258da/raw/0f1779499c62eeee3e2a577ef641e94e57b71154/janus.sh && sh janus.sh
Hope This Help Much, I believe there are certain dependencies needs to be installation but you missed it. In https://github.com/meetecho/janus-gateway it stated the Dependencies needed, have to be installed without error.
It is because libmicrohttpd version is lower than requirement, Download and install libmicrohttpd manually (dont use yum or apt-get).
Related
For example， I want to install glog, I could use
sudo apt-get install libgoogle-glog-dev
or
git clone https://github.com/google/glog
./autogen.sh && ./configure && make && make install
What's the difference?
I'll appreciate it if you help me.
In
sudo apt-get install libgoogle-glog-dev,
It installs and maintains programs and other collections of files (data, documentation, etc.) in the form of packages.
while in second one you first download the source from Github repository and then run various shell files which get it installed on your system.
I hope it helps you.
I would like to automate ssh login from my Mac.
It does have a simple solution:
sshpass -p my_password ssh m_username#hostname
But my problem is installing sshpass on my Mac.
Update 2022: Unfortunately, Aleks Hudochenkov is no longer updating his repo. There are a bunch of other repos on GitHub that purport to contain a Homebrew recipe for sshpass. It's up to you which of them (if any) to trust.
Some years have passed and there is now a proper Homebrew Tap for sshpass, maintained by Aleks Hudochenkov. To install sshpass from this tap, run:
brew install hudochenkov/sshpass/sshpass
Tap source
There are instructions on how to install sshpass here:
https://gist.github.com/arunoda/7790979
For Mac you will need to install xcode and command line tools then use the unofficial Homewbrew command:
curl -L https://raw.githubusercontent.com/kadwanev/bigboybrew/master/Library/Formula/sshpass.rb > sshpass.rb && brew install sshpass.rb && rm sshpass.rb
Another option in 2020 is this homebrew tap, maintained by esolitos
brew install esolitos/ipa/sshpass
Following worked for me
curl -O -L https://sourceforge.net/projects/sshpass/files/sshpass/1.06/sshpass-1.06.tar.gz && tar xvzf sshpass-1.06.tar.gz
cd sshpass-1.06/
./configure
sudo make install
Solution provided by lukesUbuntu from github works for me:
Just use brew
$ brew install http://git.io/sshpass.rb
Please follow the steps below to install sshpass in mac.
curl -O -L https://fossies.org/linux/privat/sshpass-1.06.tar.gz && tar xvzf sshpass-1.06.tar.gz
cd sshpass-1.06
./configure
sudo make install
I just followed the instructions from this article and it helped,
curl -O -L http://downloads.sourceforge.net/project/sshpass/sshpass/1.05/sshpass-1.05.tar.gz && tar xvzf sshpass-1.05.tar.gz
//This creates a directory sshpass-1.05
cd sshpass-1.05
./configure
make
sudo make install
I found that most of the answers listed here are out of date. To install the latest, I ran this and downloaded directly from sourceforge.net, based on other answers here.
curl -L https://sourceforge.net/projects/sshpass/files/latest/download -o sshpass.tar.gz && tar xvzf sshpass.tar.gz
cd sshpass-*
./configure
sudo make install
For the simple reason:
Andy-B-MacBook:~ l.admin$ brew install sshpass
Error: No available formula with the name "sshpass"
We won't add sshpass because it makes it too easy for novice SSH users to
ruin SSH's security.
Thus, the answer to do the curl / configure / install worked great for me on Mac.
Just a slight update from the previous answer
curl -O -L https://fossies.org/linux/privat/sshpass-1.09.tar.gz && tar xvzf sshpass-1.09.tar.gz
cd sshpass-1.09/
./configure
sudo make install
This Worked as on OCT 2021
Short answer
To avoid having to rely on unknown Github repositories (directly or via Homebrew taps) just use MacPorts :)
Just install MacPorts and then type
sudo port install sshpass
Details / Long answer
The idea is to install sshpass via MacPorts instead of Homebrew.
You can have both Homebrew and MacPorts on the same machine, but be careful as some packages are available on both sources, and in that case you should be consistent in order to avoid conflicts.
In such cases, normally I give priority to Homebrew, but sshpass won't be provided by them, as they explicitly say.
In fact, if you type:
brew install sshpass
Then the output will also include this sentence:
We won't add sshpass because it makes it too easy for novice SSH users to ruin SSH's security.
Then in this case MacPorts is the only choice (if you really want to use sshpass).
Some links
Link to the MacPorts project
How to install MacPorts
Link to the sshpass Port on MacPorts
Aargh, the problem with the outdated links.
Simply go to https://sourceforge.net/projects/sshpass/
Download latest version and then tar xvzf it and finally cd to the dir where it got unpackedand install with:
./configure make sudo make install
I suppose this will also work on every OS with supported C sdk installed...
I've updated my Mac OS X to Yosemite, but doing that I over write all my dev environment. So now, to run Laravel 4 on my local apache I need to install the Mcrypt extension, but everything that i've tried i fail. Even the steps that have worked on OS X Mavericks (10.9)
Anybody has the same issue?
Thanks in advance.
Cheers
I just installed it right now on my Mavericks installation using homebrew and it worked surprisingly well. Can't say whether or not it will work so well on Yosemite but worth a shot..
Homebrew
brew install autoconf
brew install mcrypt
Macports
Check PHP version
php -v
Update Macports
sudo port -v selfupdate
Download & install the appropriate version..
sudo port install php55-mcrypt
now dummy proof it..
Find where Macports put the file mcrypt.so and copy it to all instances of /php/extensions/no-debug-... folder. If you have that directory structure in multiple places, copy it to all of them. So every php/extensions/no-debug.. folder on your computer has a copy of mcrypt.so
sudo cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/mcrypt.so /usr/lib/php/extensions/no-debug-non-zts-20090626/
Determine where your php.ini file is and make sure it's the one your actually using because you may have this file in more than 1 place. Do this to all php.ini files you find..
Within that file find and uncomment the following line. If it's commented out, uncomment it. If it's not in the file at all, add it. In my default php.ini file I found this on line 536:
extension=mcrypt.so
Compile
Download mcrypt
curl -O http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
Uncompress it
tar -zxvf libmcrypt-2.5.8.tar.gz
Configure, build, and install
./configure && make && sudo make install
Download Autoconf
curl -O http://ftp.gnu.org/gnu/autoconf/autoconf-latest.tar.gz
Uncompress it
tar xvfz autoconf-latest.tar.gz
Configure, build, and install
./configure && make && sudo make install
Apache
Regardless which method you used to install it. You should always restart Apache when your done.
Restart Apache
sudo apachectl restart
I just did these and it installed. MAMP etc. is not installed.
brew tap josegonzalez/homebrew-php
brew install php55-mcrypt
And weirdly, I had to reinstall to make it install properly.
brew reinstall php55-mcrypt
However, this also re-installed PHP5.5 from source, but no matter, all is working fine on my end.
I had the same problem. But, I'm using MAMP for my local development. So, I just needed to symlink the php file over to MAMP's version and all is working.
If using homebrew, try reinstalling or relinking your php install.
I'm sure I can help you get back up and working, so just let me know if that doesn't help.
First Install libtool from homebrew, which is a dependency in 10.10 Yosemite
brew reinstall libtool --universal && brew unlink libtool && brew link libtool
Then CD to your php directory
cd /usr/local/php5
And into your php.d directory
cd php.d
Then finally do a quick ls to see which extensions you are using:
ls -l
If you see duplicate entries containing "mcrypt" you will need to open one of them up, and comment out the line:
extension=mcrypt.so
to
;;extension=mcrypt.so
But only in one of them. For me it was mcrypt.ini. So..
sudo nano mcrypt.ini
added the line and done!
After trying to run the following query with THC-HYDRA:
hydra -l ROOT -P pass.lst -M hosts.lst ssh
I get this responce:
Hydra v7.5 (c)2013 by van Hauser/THC & David Maciejak - for legal purposes only
Hydra (http://www.thc.org/thc-hydra) starting at 2013-11-15 16:35:56
[ERROR] Compiled without LIBSSH v0.4.x support, module is not available!
I downloaded LIBSSH from libssh.org and installed it to no avail. The internet seems to hold no answers however I can see others have asked the same question.
Thanks very much indeed,
user.
I was having the same problem. I compiled and then realized I forgot libssh when I tried to run it against my router so I installed it and recompiled; still it was not working.
I tried "make clean" and it worked like a charm.
apt-get purge hydra
apt-get install cmake libssl-dev
cd /usr/local/src
wget http://www.libssh.org/files/0.4/libssh-0.4.8.tar.gz
tar zxf libssh-0.4.8.tar.gz
cd libssh-0.4.8
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug -DWITH_SSH1=ON ..
make
make install
cd /usr/local/src
wget http://freeworld.thc.org/releases/hydra-6.3-src.tar.gz
tar zxf hydra-6.3-src.tar.gz
cd hydra-6.3-src
./configure
make
make install
I'm trying to compile linphone on mountain lion. I have downloaded the sources and followed all the instructions in the README.macos file. The first time, when I got to '$ port install ige-mac-integration' an error occurred. It said gtk2 had to be installed with x11, however, the instructions said to install it with quartz and no_x11. I tried installing gtk2 again, this time with x11, but when I get to the compiling process it tells me quartz is needed. I can't install both, because the gtk2 installation will complain about it, and it seems I need both to complete the entire process of installing and compiling linphone.
I have tried these steps with the downloadable sources, as well as the git sources, both gave me the same problems. Linphone does not have a forum, so I couldn't ask it on their site.
I just need to get the sources and start using them, so any recommendations on how to open the linphone source, edit it, and compile/run it would be very welcome. The ideal situation would be where I can just open an xcode project file.
This is the readme file:
**********************************
* Compiling linphone on macos X *
**********************************
You need:
- Xcode (download from apple or using appstore application)
- Macports: http://www.macports.org/
Download and install macports using its user friendly installer.
- Install build time dependencies
$ port install automake autoconf libtool intltool
- Install some linphone dependencies with macports
$ port install speex
$ port install libosip2 # WARNING: currently outdated in macport
$ port install libeXosip2 #WARNING: currently outdated in macport
$ port install ffmpeg-devel
$ port install libvpx
- Install srtp (optional) for call encryption
$ port install srtp
If that fails, get from source:
$ git clone git://git.linphone.org/srtp.git
$ cd srtp && autoconf && ./configure --prefix=/opt/local && make libsrtp.a
$ sudo make install
- Install zrtpcpp (optional), for unbreakable call encryption
$ port install cmake
$ git clone git://git.linphone.org/zrtpcpp.git
$ cd zrtpcpp && cmake -Denable_ccrtp=false . && make
$ sudo make install
- Install gtk. It is recommended to use the quartz backend for better integration.
$ port install gtk2 +quartz +no_x11
$ port install hicolor-icon-theme
- Compile and install the tunnelsu
If you got the source code from git, run ./autogen.sh first
Then or otherwise, do:
$ ./configure --prefix=/opt/local && make && sudo make install
- Compile linphone
If you got the source code from git, run ./autogen.sh first.
Then or otherwise, do:
$ ./configure --prefix=/opt/local --with-readline=/opt/local --disable-strict --disable-x11 --with-srtp=/opt/local --with-gsm=/opt/local --enable-zrtp && make
Install to /opt/local
$ sudo make install
Done.
If you want to generate a portable bundle, then install gtk-mac-bundler.
Use git:
$ git clone https://github.com/jralls/gtk-mac-bundler.git
$ cd gtk-mac-bundler && make install
$ export PATH=$PATH:~/.local/bin
#make this dummy charset.alias file for the bundler to be happy:
$ sudo touch touch /opt/local/lib/charset.alias
Then run, inside linphone source tree:
1. Run configure as told before but with "--enable-relativeprefix" appended.
$ make
$ make bundle
The resulting bundle is located in linphone build directory, together with a zipped version.
For a better appearance, you can install the gtk-quartz-engine (a gtk theme) that make gtk application more similar to other mac applications (but not perfect).
$ git clone https://github.com/jralls/gtk-quartz-engine.git
$ cd gtk-quartz-engine
$ autoreconf -i
$ ./configure --prefix=/opt/local && make
$ sudo make install
Generate a new bundle to have it included.
Below is the details to configure the dependencies and build linphone.
==============================================================
Step: 1:- Dependency configuration:
I just followed the instruction which is available in "README.macos" upto sqlite3 configuration. I had some problem with dependancies configuration.
Because of macport version, srtp configuration is failed. So I have downloaded "MacPorts-2.1.3-10.8-MountainLion.pkg" and installed manually.
Because of GTK version, libsoup is failed. So I have downloaded "GTK_2.18.5-X11.pkg" and installed manually.
After the manual installation, I have followed "README.macos" again for reconfiguration.
NOTE: Sometime terminal won't recognize "wget".
--> Solution: just execute below command.
echo 'alias wget="curl -O"' >> ~/.bash_profile
Step: 2:- Compile and Install:
I got some problem related to intltool while compiling.
Solution: just I set the path by executing below commands
export PATH=$PATH:/opt/local/bin
export MANPATH=$MANPATH:/opt/local/share/man
export INFOPATH=$INFOPATH:/opt/local/share/info
Now it is successfully compiled and installed.
Step: 3:- Creating bundle to run the app:
Just I followed below commands to make the build.
If you want to generate a portable bundle, then install gtk-mac-bundler.
Use git:
$ git clone https://github.com/jralls/gtk-mac-bundler.git
$ cd gtk-mac-bundler && make install
$ export PATH=$PATH:~/.local/bin
#make this dummy charset.alias file for the bundler to be happy:
$ sudo touch touch /opt/local/lib/charset.alias
Then run, inside linphone source tree:
1. Run configure as told before but with "--enable-relativeprefix" appended.
$ make
$ make bundle
It will create "linphone.app" file in current linphone directory. It will support only for "Mountain Lion".
Step: 4:- Support for lower version: (e.g.: Lion, Snow Leopard...)
We have to configure "libiconv hack" to supporting for lower version
I think it will help you.
I wrote an answer here. It's a bit long but I sincerely hope it is clear enough and will help you.
It contains the build settings and other libs you need to include.
Cool stuff I didn't need to run the make :)
Best,