The problem is to redraw a self-intersecting 2D polygon, whose border is always a separation line between its interior and its exterior and completely crosses itself in some points (that is, in those points, the polygon interior switches the side of the border, from left to right or vice versa).
What is the simplest algorithm that can do that?
The initial polygon (left) and the redrawn one (right):
.
I added another, a little more complicated example of an initial polygon, that is still very simple (it has only one self-intersection vertex) in this third picture where the polygon interior is filled (points A,B,C,D,E appear in alphabetic order initially when drawing the polygon border).
What you are asking isn't that simple.
You can use a sweepline procedure. The general principle is as follows.
When you draw an horizontal line across the polygon, it meets an even number of edges. Sorting the intersections from left to right, and linking them in pairs, you obtain interior segments.
If you do this for all positions of the horizontal, you will decompose the polygon in a number of monotone chains, i.e. polylines always going down.
When the polygon is simple, the chains appear in pairs at a vertex, disappear in pairs at another, and live their own lifes. But when the polygon is crossed, the chains can cross each other. This can be detected by the fact that from one position of the horizontal to the next, the ordering of intersections change.
Now you have to fix that by "uncrossing" the chains, which is done by splitting the edges at the intersection point.
I can't develop more here, try and lookup "sweepline algorithm".
Related
This question is an extension on some computation details of this question.
Suppose one has a set of (potentially overlapping) circles, and one wishes to compute the area this set of circles covers. (For simplicity, one can assume some precomputation steps have been made, such as getting rid of circles included entirely in other circles, as well as that the circles induce one connected component.)
One way to do this is mentioned in Ants Aasma's and Timothy's Shields' answers, being that the area of overlapping circles is just a collection of circle slices and polygons, both of which the area is easy to compute.
The trouble I'm encountering however is the computation of these polygons. The nodes of the polygons (consisting of circle centers and "outer" intersection points) are easy enough to compute:
And at first I thought a simple algorithm of picking a random node and visiting neighbors in clockwise order would be sufficient, but this can result in the following "outer" polygon to be constructed, which is not part of the correct polygons.
So I thought of different approaches. A Breadth First Search to compute minimal cycles, but I think the previous counterexample can easily be modified so that this approach results in the "inner" polygon containing the hole (and which is thus not a correct polygon).
I was thinking of maybe running a Las Vegas style algorithm, taking random points and if said point is in an intersection of circles, try to compute the corresponding polygon. If such a polygon exists, remove circle centers and intersection points composing said polygon. Repeat until no circle centers or intersection points remain.
This would avoid ending up computing the "outer" polygon or the "inner" polygon, but would introduce new problems (outside of the potentially high running time) e.g. more than 2 circles intersecting in a single intersection point could remove said intersection point when computing one polygon, but would be necessary still for the next.
Ultimately, my question is: How to compute such polygons?
PS: As a bonus question for after having computed the polygons, how to know which angle to consider when computing the area of some circle slice, between theta and 2PI - theta?
Once we have the points of the polygons in the right order, computing the area is a not too difficult.
The way to achieve that is by exploiting planar duality. See the Wikipedia article on the doubly connected edge list representation for diagrams, but the gist is, given an oriented edge whose right face is inside a polygon, the next oriented edge in that polygon is the reverse direction of the previous oriented edge with the same head in clockwise order.
Hence we've reduced the problem to finding the oriented edges of the polygonal union and determining the correct order with respect to each head. We actually solve the latter problem first. Each intersection of disks gives rise to a quadrilateral. Let's call the centers C and D and the intersections A and B. Assume without loss of generality that the disk centered at C is not smaller than the disk centered at D. The interior angle formed by A→C←B is less than 180 degrees, so the signed area of that triangle is negative if and only if A→C precedes B→C in clockwise order around C, in turn if and only if B→D precedes A→D in clockwise order around D.
Now we determine which edges are actually polygon boundaries. For a particular disk, we have a bunch of angle intervals around its center from before (each sweeping out the clockwise sector from the first endpoint to the second). What we need amounts to a more complicated version of the common interview question of computing the union of segments. The usual sweep line algorithm that increases the cover count whenever it scans an opening endpoint and decreases the cover count whenever it scans a closing endpoint can be made to work here, with the adjustment that we need to initialize the count not to 0 but to the proper cover count of the starting angle.
There's a way to do all of this with no trigonometry, just subtraction and determinants and comparisons.
I am working with several convex polygons that overlap each other and I need to combine them back together to form one single polygon that may be convex or concave.
The problem is always as follows:
1) The polygons that I need to merge together are always convex.
2) The vertices of each polygon are defined in clockwise order.
3) The polygons are never in any specific order.
4) The final polygon can only be simple convex or concave polygon, i.e. no self-intersection, no duplicate vertices or holes in the shape.
Here is an example of the kind of polygons that I am working with.
![overlapping convex polygons]"image removed")
My current approach is to start from the first polygon and vertex by vertex I loop through all vertices of all of the polygons to find overlap. If there is no overlap, I store the vertex for the final outline and continue.
Upon finding overlapping vertices, I determine which polygon to continue to by measuring the angles of the possible paths and by choosing the one that leads towards the outside of the shape.
This method works until I encounter polygons that do not have vertices overlapping each other, but instead one polygon's vertex is overlapping another polygon's side, as is the case with the rectangle in the image.
I am currently planning on solving these situations by running line intersect checks for all shapes that I have not yet processed, but I am convinced that this cannot be the easiest or the best method in terms of performance.
Does someone know how I should approach this problem in a more efficient manner and/or universal manner?
I solved this issue and I'm posting the answer here in case someone else runs into this issue as well.
My first step was to implement a pre-processing loop based on trincot's suggestions.
I calculated the minimum and maximum x and y bounds for each individual shape.
I used these values to determine all overlapping shapes and I stored a simple array for each shape that I could later use to only look at shapes that can overlap each other.
Then, for the actual loop that determines the outline of the final polygon:
I start from the first shape and simply compare its vertices to those of the nearby shapes. If there is at least one vertex that isn't shared by another vertex, it must be on the outer edge and the loop starts from there. If there are only overlapping vertices, then I add the first shape to a table for all checked shapes and repeat this process with another shape until I find a vertex that is on the outer edge.
Once the starting vertex is found, the main loop will check the vertices of the starting shape one by one and measure how far from the given vertex is from every nearby shapes' edges. If the distance is zero, then the vertex either overlaps with another shape's vertex or the vertex lies on the side of another shape.
Upon finding the aforementioned type of vertex, I add the previous shape's number to the table of checked shapes so that it isn't checked again. Then, I check if there are other shapes that share this particular vertex. If there are, then I determine the outermost shape and continue from there, starting back from step 2.
Once all shapes have been checked, I check that all non-overlapping vertices from the starting shape were indeed added to the outline. If they weren't, I add them at the end.
There may be computationally faster methods, but I found this one to be simple to write, that it meets all of my requirements and it is fast enough for my needs.
Given a vertex, you could speed up the search of an "overlapping" vertex or edge as follows:
Finding vertices
Assuming that the coordinates are exact, in the sense that if two vertices overlap, they have exactly the same x and y coordinates, without any "error" of imprecision, then it would be good to first create a hash by x-coordinate, and then for each x-entry you would have a hash by y-coordinate. The value of that inner hash would be a list of polygons that have that vertex.
That structure can be built in O(n) time, and will allow you to find a matching vertex in constant time.
Only if that gives no match, you would go to the next algorithm:
Finding edges
In a pre-processing step (only once), create a segment tree for these polygons where a "segment" corresponds to a min/max x-coordinate range for a particular polygon.
Given a vertex, use the segment tree to find the polygons that are in the right x-coordinate range, i.e. where the x-coordinate of the vertex is within the min/max range of x-coordinates of the polygon.
Iterate those polygons, and eliminate those that do not have an y-coordinate range that has the y-coordinate of the vertex.
If no polygons remain, the vertex does not participate in any edge of another polygon.
You cannot get more than one polygon here, since that would mean another polygon shares the vertex, which is a case already covered by the hash-based algorithm.
If you get just one polygon, then continue your search by going through the edges of that polygon to find a match -- which is what you already planned on doing (line intersect check), but now you would only need to do it for one polygon.
You could speed that line intersect check up a little bit by first filtering the edges to those that have the right x-range. For convex polygons you would end up with at most two edges. At most one of those two will have the right y-range. If you get such an edge, check whether the vertex is really on that edge.
I've got some 2D polygons, each as a list of clockwise coordinates. The polygons are
simple (i.e. they may be concave but they don't intersect themselves) and they don't overlap eachother.
I need to subdivide these polygons into smaller polygons to fit a size constraint. Just like the original polygons, the smaller ones should be simple (non-self-intersecting) and the constraint is they should each fit within one 'unit square' (which, for sake of simplicity, I can assume to be 1x1).
The thing is, I need to do this as efficiently as possible, where 'efficient' means the lowest number of resulting (small) polygons possible. Computation time is not important.
Is there some smart algorithm for this? At first I thought about recursively subdividing each polygon (splitting it in half, either horizontally or vertically whichever direction is larger) which works, but I don't seem to get very optimal results with this. Any ideas?
Draw a circle with a center of one of the initial points of initial polygon and radius of your desired length constraint.
The circle will intersect at least two lines at two points. Now you have your first triangle by the biggest as possible. Then choose those intersections as next target. Do until there is no initial points left outside. You have your triangles as large as possible(so as few as possible)
Do not account the already-created triangle edges as an intersection point.
Resulting polygons are not always triangle, they can be quads too. Maybe larger point-numbers too!
They all just nearly equal to the desired size.
Fine-tuning the interior parts would need some calculation.
I suggest you use the following:
Triangulate the polygon, e.g. using a sweep line algorithm.
Make sure all the triangles do not violate the constraint. If one violates the constraint, first try edge-flips to fix it, otherwise subdivide on the longest edge.
Use dynamic programming to join the triangles, while maintaining the constraint and only joining adjacent polygons.
I have two 2D rectangles, defined as an origin (x,y) a size (height, width) and an angle of rotation (0-360°). I can guarantee that both rectangles are the same size.
I need to calculate the approximate area of intersection of these two rectangles.
The calculation does not need to be exact, although it can be. I will be comparing the result with other areas of intersection to determine the largest area of intersection in a set of rectangles, so it only needs to be accurate relative to other computations of the same algorithm.
I thought about using the area of the bounding box of the intersected region, but I'm having trouble getting the vertices of the intersected region because of all of the different possible cases:
I'm writing this program in Objective-C in the Cocoa framework, for what it's worth, so if anyone knows any shortcuts using NSBezierPath or something you're welcome to suggest that too.
To supplement the other answers, your problem is an instance of line clipping, a topic heavily studied in computer graphics, and for which there are many algorithms available.
If you rotate your coordinate system so that one rectangle has a horizontal edge, then the problem is exactly line clipping from there on.
You could start at the Wikipedia article on the topic, and investigate from there.
A simple algorithm that will give an approximate answer is sampling.
Divide one of your rectangles up into grids of small squares. For each intersection point, check if that point is inside the other rectangle. The number of points that lie inside the other rectangle will be a fairly good approximation to the area of the overlapping region. Increasing the density of points will increase the accuracy of the calculation, at the cost of performance.
In any case, computing the exact intersection polygon of two convex polygons is an easy task, since any convex polygon can be seen as an intersection of half-planes. "Sequential cutting" does the job.
Choose one rectangle (any) as the cutting rectangle. Iterate through the sides of the cutting rectangle, one by one. Cut the second rectangle by the line that contains the current side of the cutting rectangle and discard everything that lies in the "outer" half-plane.
Once you finish iterating through all cutting sides, what remains of the other rectangle is the result.
You can actually compute the exact area.
Make one polygon out of the two rectangles. See this question (especially this answer), or use the gpc library.
Find the area of this polygon. See here.
The shared area is
area of rectangle 1 + area of rectangle 2 - area of aggregated polygon
Take each line segment of each rectangle and see if they intersect. There will be several possibilities:
If none intersect - shared area is zero - unless all points of one are inside the other. In that case the shared area is the area of the smaller one.
a If two consecutive edges of one rectactangle intersect with a single edge of another rectangle, this forms a triangle. Compute its area.
b. If the edges are not consequtive, this forms a quadrilateral. Compute a line from two opposite corners of the quadrilateral, this makes two triangles. Compute the area of each and sum.
If two edges of one intersect with two edges of another, then you will have a quadrilateral. Compute as in 2b.
If each edge of one intersects with each edge of the other, you will have an octagon. Break it up into triangles ( e.g. draw a ray from one vertex to each other vertex to make 4 triangles )
#edit: I have a more general solution.
Check the special case in 1.
Then start with any intersecting vertex, and follow the edges from there to any other intersection point until you are back to the first intersecting vertex. This forms a convex polygon. draw a ray from the first vertex to each opposite vetex ( e.g. skip the vertex to the left and right. ) This will divide it into a bunch of triangles. compute the area for each and sum.
A brute-force-ish way:
take all points from the set of [corners of
rectangles] + [points of intersection of edges]
remove the points that are not inside or on the edge of both rectangles.
Now You have corners of intersection. Note that the intersection is convex.
sort the remaining points by angle between arbitrary point from the set, arbitrary other point, and the given point.
Now You have the points of intersection in order.
calculate area the usual way (by cross product)
.
Given an image of a 2-dimensional irregular (non-convex) shape, how would I able to compute all the ways in which it could lie stable on a flat surface? For example, if the shape is a perfect square rectangle, then it will surely have 4 ways in which it is stable. A circle on the other hand either has no stable orientation or every point is a stable orientation.
EDIT: There's this nice little game called Splitter (Beware, addictive game ahead) that seems close to what I want. Noticed that you cut a piece of the wood out it would fall to the ground and lay in a stable manner.
EDIT: In the end, the approach I took is to compute center of mass (of the shape) and compute the convex hull (using OpenCV), and then loop through every pair of vertices. If the center of mass falls on top of the line formed by the 2 vertices, it is deemed stable, else, no.
First find its center of mass (CM). A stable position is one in which the CM will be higher if you make a slight rotation. Now look at the hull, the smallest convex region that encloses the shape:
(source: walkytalky.net)
If the hull is a polygon, then a stable position is one in which the shape is resting on one of the sides, and the CM is directly over that side (not necessarily over the midpoint of the side, just somewhere over it.
If the hull has curves (that is, if the shape has curves which touch the hull), they must be give special treatment. The shape will be stable when resting on a curved edge iff the CM is directly above the lowest point of the curve, and the radius of the curve at that point is greater than the height of the CM.
Examples:
A rectangle. The hull is simply the rectangle, and the CM is at the center. The shape is stable on each of the four sides.
A rectangle with the sides hollowed, but the corners still intact. The hull is still the original rectangle, and the CM is close to where it used to be. All four sides of the hull are still stable (that is, you can still rest the shape on any two corners).
A circle. The CM is in the center, the hull is the circle. There are no stable positions, since the radius of the curve is always equal to the height of the CM. Give it a slight touch, and it will roll.
An ellipse. The CM is at the center, the hull is the shape. Now there are two stable positions.
A semicircle. The CM is somewhere on the axis of symmetry, the hull is the shape. Two stable positions.
A narrow semicircular crescent. The hull is a semicircle, the CM is outside the shape (but inside the hull). Two stable positions.
(source: walkytalky.net)
(The ellipse position marked with an X is unstable, because the curvature is smaller than the distance to the centre of mass.)
note: this answer assumes your shape is a proper polygon.
For our purposes, we'll define an equilibrium position as one where the Center of Mass is directly above a point that is between the leftmost and rightmost ground-contact points of the object (assuming the ground is a flat surface perpendicular to the force of gravity). This will work in all cases, for all shapes.
Note that, this is actually the physical definition of rotational equilibrium, as a consequence of Newtonian Rotational Kinematics.
For a proper polygon, if we eliminate cases where they stand on a sole vertex, this definition is equivalent to a stable position.
So, if you have a straight downward gravity, first find the left-most and right-most parts of it that are touching the ground.
Then, calculate your Center of Mass. For a polygon with known vertices and uniform density, this problem is reduced to finding the Centroid (relevant section).
Afterwards, drop a line from your CoM; if the intersection of the CoM and the ground is between those two x values, it's at equilibrium.
If your leftmost point and rightmost point match (ie, in a round object), this will still hold; just remember to be careful with your floating point comparisms.
Note that this can also be used to measure "how stable" an object is -- this measure is the maximum y-distance the Center of Mass can move before it is no longer within the range of the two contact points.
EDIT: nifty diagram made hastily
So, how can you use this to find all the ways it can sit on a table? See:
EDIT
The programmable approach
Instead of the computationally expensive task of rotating the shape, try this instead.
Your shape's representation in your program should probably have a list of all vertices.
Find the vertices of your shape's convex hull (basically, your shape, but with all concave vertices -- vertices that are "pushed in" -- eliminated).
Then Iterate through each of pair of adjacent vertices on your convex hull (ie, if I had vertices A, B, C, D, I'd iterate through AB, BC, CD, DA)
Do this test:
Draw a line A through the two vertices being tested
Draw a line perpendicular to A, going through CoM C.
Find the intersection of the two lines (simple algebra)
If the intersection's y value is in between the y value of the two vertices, it stable. If the y values are all equal, compare the x values.
That should do the trick.
Here is an example of the test being running on one pair of vertices:
If your shape is not represented by its vertices in your data structure, then you should try to convert them. If it's something like a circle or an ellipse, you may use heuristics to guess the answer (a circle has infinite equilibrium positions; an ellipse 4, albeit only two "stable" points). If it's a curved wobbly irregular shape, you're going to have to supply your data structure for me be able to help in a program-related way, instead of just providing case-by-case heuristics.
I'm sure this is not the most efficient algorithm, but it's an idea.
If you can order the verticles of the polygon (assuming it has a finite number of vertices), then just iterate over adjacent pairs of vertices and record the angle it rests at through some form of simulation. There will be duplicate orientations for it to sit on in the case of weird shapes, like stars, but you can accomodate for that by keeping track of the resting rotation.