I have a spring 3 app deployed in openshift jboss eap6, and I want to upgrade to ver 4. I also want to upgrade to Java8. Has anyone here been successful in doing so? What are the things that must be considered? How can I make the transition easier? I'm so afraid of Jar hell.
Upgrading von Spring 3.0 to 4.0 could need some changes (depending on what you have done and used). I recommend to do it in small steps, so you can check that everything still works more often, so: uprade to 3.1 first, then 3.2, and then 4.0. After that upgrade to Java 8.
The Spring Reference contain some hints in the what is new section and this Wiki: Migrating from earlier versions of the Spring Framework
Attention: if you upgrade Spring Security too, then I strongly recommend to read its upgrade hints in its Migration documentation!
Solution to your Question
Don't worry Spring 4 is 100% compatible with Java 8
For Jars you need to use the Bill of Materials of Spring 4 Jars which can be obtained in this Link. Use only these jars which will take care of your dependencies issues.
Typically replace all these JAR files in your WEB Applications and try to build and deploy your application. You got your JAR upgrade if it runs without any issues. Most probably 100% it will run without any issues.
Then Depending your scenarios you can apply your spring-framework components.
Related
We are trying to upgrade our app to spring boot 2.0 and while doing that we got error java.lang.ClassCastException: org.opensaml.core.xml.schema.impl.XSAnyBuilder cannot be cast to org.opensaml.xml.XMLObjectBuilder. After lot of research, we found that, we are running into trouble because we have two opensaml jars in classpath ( 2 and 3) and decided to upgrade to upgrade spring-security-saml2-core jar to 2.0.0.
We downloaded 2.0.0.SNAPHSHOT jar but it seems there are lot of classes changed/renamed. Is there any documentation/examples where i can compare and migrate my old code easily. For e.g. old jar SamlBootStrap class and new one dont have.
Please help
The differences between the two versions are dramatic, and I understand that also the differences between the opensaml library versions are pretty much so. I made a little project for myself to learn how to use this new versions, and maybe can help you too.
Samlv2App
I've recently inherited a project that's built on some older technologies, including iBATIS 2.x, and Struts 1.x. Both of those seem to be supported (though #Deprecated) in Spring 3.2.x, and not at all in Spring 4.x:
org.springframework.orm.ibatis, Object Relational Mapping (ORM) Data Access - iBATIS SQL Maps
org.springframework.web.struts, Integrating with other web frameworks - Apache Struts 1.x and 2.x
However, before I start the effort of migrating to Spring 3, I want to know how much longer I can expect to see it supported by the upstream developers. Would I have enough time to keep running Spring 3 while I migrate other parts of my application to newer tools, and then finally migrate over to Spring 4? Or should I focus on upgrading all of these other things before I can get onto Spring?
I hardly understand your problem. iBATIS 2.x and Struts 1.x are both no longer supported. They can work fine, as does Spring 2.x, but if a security problem is discovered, it will not be fixed.
If you contemplate migrating to Spring 3.x, you should also contemplate the migration to MyBatis and Struts 2.x (or Spring MVC ?) unless you have special requirements.
BTW, Spring 3.0 and 3.1 series are no longer supported either, and support for 3.2 should end when 4.2 will reach General Availability status, as Spring Framework generally offers support for current version, and the 2 previous (legacy) ones.
Spring 3.X will be end-of-life as of Dec 31 2016, but there will only be maintenance releases until that time (no feature development will happen).
I just work on project that uses Spring 4 with MyBatis. There is project MyBatis-Spring that integrates these two. Works like charm.
Don't know how to help with second bullet, cause we are using Spring MVC.
Seems that they've just posted a blog post that includes clarification on this topic:
Furthermore, please note that the 3.2.x line - and therefore the
entire 3.x generation - is approaching its end of life in 2015. We are
still committed to basic maintenance for critical issues; however,
don’t expect more than two or three further 3.2.x releases down the
road.
Source: Spring Framework 4.1.4 & 4.0.9 & 3.2.13 released
So, it seems that I'd have at least a few months of 3.x being supported to work on transitioning everything.
For my current project I'm required to use Struts 1.2.4. But I also wanted to utilize Spring 4.1.x.
To compensate for the missing Struts support since Spring 4, I copied the code from the spring-struts 3.2.13 package and created a Spring 4.1.5 compatible spring-struts-forwardport package.
Obviously this is not the most elegant solution, but maybe this can help you solve your problem.
I guess this package will also work with the next Spring 4.1 releases.
According to you what are the risks of using Spring 4 with the jersey-spring3 integration module?
I have tried to use Spring 4.0 with the jersey spring example and the example still works but i'm unable to identify risks linked to this usage.
I have started using Jersey 2.7 and Spring 4.0.x recently in a project. I have setup a context hierarchy to inject beans, so far, I have discovered only one limitiation but that does not seem relate to Spring 4 but rather to the module itself or the HK2 Spring Bridge.
To give more insight about my use. I have a XJC/JAXB-backed which is consumed by a common service, repository and exposed through JAX-WS, and now hopefully through JAX-RS.
The multi-context stuff works now with #Autowiredwith 2.8-SNAPSHOT. I have applied my changes and the 2.8-SNAPSHOT to 2.7. Here is the diff.
Edit (Michael-O; 2014-10-17): Here is a modified Spring module based off 2.11 with multi-context support.
Not an answer to original question, just related information
This may be a little premature, but the new Major 3.0 version of Jersey will be using Spring 4, in the new jersey-spring4 module. The new Major version will be built with Java 8. Though a new Major version will be released, the 2.x line will still be actively developed to keep support for Java 7
I'll update this post once 3.0 has been release.
For anyone interested, you can see this mailing list to see what the Jersey team has to say about the new 3.x line.
Not sure if you came across any issues but I currently face one. It is described in other thread.
Simply, using jersey-spring3 2.12 and spring 4.1.0.RELEASE in one maven project leads to following class incompatibility:
2014-09-14 01:15:44.175:WARN:oejuc.AbstractLifeCycle:main: FAILED org.eclipse.jetty.server.handler.HandlerCollection#696
db620[org.eclipse.jetty.server.handler.ContextHandlerCollection#27abb6ca[o.e.j.m.p.JettyWebAppContext#737d100a{/,file:/C
:/Users/Josef/Workspace/TransitCenter/src/main/webapp/,STARTING}{file:/C:/Users/Josef/Workspace/TransitCenter/src/main/w
ebapp/}], org.eclipse.jetty.server.handler.DefaultHandler#6968c1d6, org.eclipse.jetty.server.handler.RequestLogHandler#7
d986d83]: java.lang.NoSuchMethodError: org.springframework.beans.factory.support.DefaultListableBeanFactory.getDependenc
yComparator()Ljava/util/Comparator;
java.lang.NoSuchMethodError: org.springframework.beans.factory.support.DefaultListableBeanFactory.getDependencyComparato
r()Ljava/util/Comparator;
at org.springframework.context.annotation.AnnotationConfigUtils.registerAnnotationConfigProcessors(AnnotationCon
figUtils.java:136)
We have an application that is currently running spring 2.5.6 and mule 2.2.1. We have decided to go ahead and upgrade the app to use spring 3.2 we also upgraded spring security to 3.1. I understand that Mule 2.2.1 uses spring 2.5.6 for configuration and so forth. We were to re-factor our code and build the entire project. However after deploying the application and starting the server, my server started in about 6 seconds instead of the normal 30 seconds and then I noticed that none of my services were not loaded. Unfortunately after days of investigating I cannot find where everything fails, as there are no errors in any of the logs including spring and mule logs. My question is it possible to get these to play together or should I just forget about getting this to work.
I read this post http://lifeinide.blogspot.com/2012/07/spring-3-and-mule-2-initialized-by.html and followed these instruction and still was not able to get it work. Mule says it started up just fine without any errors but I can hit any of my services. Any help? Thanks
Thanks #genjosanzo for the pointer. It helped met dig into this issue better and eventually make it work.
#mtanzania,
We had a similar need like yours - need to make Mule 2.2.1 work with Spring 3.2.x releases. Upgrade to Mule 3 involved rewrite of Mule extensions such as exception handling strategies, a RabbitMQ Mule transport etc. Upgrade to Mule 3 was therefore ruled out.
In order to make this work, you need to rewrite/update 3 java files from your module:
groupId:org.mule.modules
artifactId:mule-module-spring-config
version:2.2.1
with implementations from :
groupId:org.mule.modules
artifactId:mule-module-spring-config
version:3.4.0
To be more specific, you need these classes to be updated/upgraded: MuleBeanDefinitionDocumentReader.java, MuleApplicationContext.java and SpringXmlConfigurationBuilder.java
With these updated versions, you can continue to create the MuleContext like:
SpringXmlConfigurationBuilder springConfigBuilder = new SpringXmlConfigurationBuilder(muleConfigPaths);
MuleContext context = new DefaultMuleContextFactory().createMuleContext(springConfigBuilder)
The modified implementations are here : Mule in Trooper and sample class that uses this is here : Trooper Mule container
Mule uses some internal spring API to parse the mule configuration and creates the correspondent beans.
For this reason the upgrade might work with spring 3.0.x but I'm pretty sure that something got broken with spring 3.1.x (i.e. this code has been introduced to maintain backward compatibility).
How about upgrading mule as well? Most of the 2.2.x syntax is still supported and many new feature has been introduced in newer mule versions.
FWIW, the above answer from #regunathb is right on. Patching in those three classes works. However, it is important to note that the 3.4 version of those classes from mule-module-spring-config will not work as-is. You must get the modified versions of the classes that #regunathb posted on GitHub, otherwise you'll end up with various incompatibilities between 3.4 and 2.2.1.
Right now I am trying to research on how stable Spring release are right now. I'm having problems determining whether the most current Spring release (3.1.1) is the best choice for a base architecture. Are there any differences between 3.0 and 3.1? If so are there any impact in terms of coding structure just like migrating from spring 2.0 to 3.0. Currently we have a base architecture for Spring 2.0 and we are thinking of migrating to 3.X for integrated AJAX support and integrated REST support as well. Are there any other perks in migrating to 3.X? Is it good idea to migrate to Spring 3.0? If yes are there any drawbacks in migrating also which version is the best to migrate to? Thanks for taking time in reading this, have a nice day.
Are there any differences between 3.0 and 3.1?
http://static.springsource.org/spring/docs/3.1.x/changelog.txt
EDIT:
ok, it that's too technical, try this:
http://static.springsource.org/spring/docs/3.1.x/spring-framework-reference/html/new-in-3.1.html
EDIT 2:
no, you do not have to use annotations. That's just a convenience feature mostly.
EDIT 3:
in Implementing Controllers all annotation based configurations have their XML-schema based counterparts. That said, unless you have very good reasons against annotations, you might try to gradually switch to this paradigm, as it is easier to read thus easier to maintain. (at least in in my opinion)
I've migrated some projects from spring 2.5.6 to spring-3.1 without any major problems. I can't speak to spring-3.1.1, but if its a non-milestone release I would be comfortable upgrading myself.
Here's a link to spring-3.1 features: http://static.springsource.org/spring/docs/3.1.0.M2/spring-framework-reference/html/new-in-3.1.html
If you're moving up from 2.x to 3.x I don't see any reason why you would NOT upgrade to 3.1, even if you don't see immediate use for 3.1 features.
Yes, there are some minor differences between Spring 3.0 and 3.1, some of them are well documented through the book Pro Spring 3, basically the JPA support has been improved with helper features like the spring-data project, the support of some standard compliant Java EE annotations and the possibility to create beans "profiles" inside your xml configuration that can be handy when used alongside with maven, among others features.
Migrating from 2.0 to 3.x shouldn't be problematic if you stick to the old xml based configuration