I am trying to run my app locally and not through an emulator.
These are the following things that I have done:
set up the free provisioning profile
"trusted" my iPhone when prompted
Enabled these settings for provisioning profile:
However, I am still getting this error when trying to run the app locally on an iPhone
No installed provisioning profiles match the installed iOS code
signing keys
What else can be done to run my app locally?
Log into the Apple Developer member center and review your certificates. Down to the left you should see the Provisioning Profiles title. Click it and you'll find a list of the profiles you have. Now you need to create one with the same app identifier that your app has in Xamarin (you find it in the Info.plist file).
After that you need to open XCode and download it through Xcode -> Preferences -> Accounts.
Clean, rebuild and debug Xamarin project and try again.
Go to xcode/preference/ account add a apple ID if you don have any...if you have double click in the name ...and look the name appear in iOS Team Provisioning Profile.
Now open in xamarin the info.plist and in Bundle Identifier put this name.
and now should load a provisional profile.
Related
I wanna publish a test flight on i phone that was published a few times before. when I wanna achieve the app's codes on Xcode I get that errors.
Failed to create provisioning profile. There are no devices registered in your account on the developer website. Select a device run destination to have Xcode register it.
No profiles for 'com.OttoTilesDesign.OttoTilesDesignVisualizer--explicit--' were found: Xcode couldn't find any iOS App Development provisioning profiles matching 'com.OttoTilesDesign.OttoTilesDesignVisualizer--explicit--'.
If you want to publish you need an "App Store" provisioning profile connected to the "identifier" in your app.
Use this profile in unity and xcode.
Try to create a new one. I had a similar issue and a reimport solved it.
Be sure that you select "any ios device" in the topline of xcode.
you only need a registered device when you want to deploy for internal/local testing.
if you want to do that, you need to register your devices with the uuid under: https://developer.apple.com/account/resources/devices/list
I have followed OneSignal's setup instructions for React Native, but
When I try to upload app to TestFlight I get the following error 'No profiles for 'com.myapp.ios.OneSignalNotificationServiceExtension' were found'
My XCode is 10.0.
Anyone help me? Thanks in advance.
Below instructions assume that your app is building and you have successfully deployed TestFlight builds in the past (since that is where I started from). I had to use the below as "Automatically manage signing" resulted in a build fail in Xcode 10:
Go to https://developer.apple.com/account/ios/profile
Click "+' to create a new provisioning profile
Choose the type of provisioning profile you want (I went with App Store since I use TestFlight builds to test)
for App ID choose "XC YOUR_DOMAIN_APP_ID OneSignalNotificationServiceExtension" and make sure enable the App Groups capability
after you have downloaded the provisioning profile, go into Xcode, turn off automatically signing on the OneSignalNotificationServiceExtension target in General tab and import the provisioning profile you just downloaded.
Use Product > Archive as usual to create your ipa file for App Store upload as usual
I'm getting the same error on appcenter. You can temporarily workaround this problem if you create a new provision file for the OneSignalNotificationServiceExtension identifier and sign your OneSignalNotificationServiceExtension with this provision.
(Your app provision should be different. your app -> com.app.example)
I have the following problem. I'm creating Xamarin iOS application(by vs for max 2017) and during a building I have this error:
No installed provisioning profiles match the installed iOS signing
identities.
As far as I can understand the solution of this problem is connected with creating provisioning profile by xCode. But when I try to generate provisioning profile(with name testtesyui) by xCode I see this error:
Failed to create provisioning profile.
There are no devices registered in your account on the developer website.
Plug in and select a device to have Xcode register it.
No profiles for 'testtesyui' were found
Xcode couldn't find any iOS App Development provisioning profiles matching 'testtesyui'.
I don't have any real iOS device and I'm planning to use iOS emulator.
Below, I listed screnshoots from xCode ui(I've hid personal data):
xCode account settings,
xCode general settings
Could some one help with this problem? Please let me know if you need more details.
Thanks.
Updating:
I opened info.plist file in vs for mac and I saw the following:
info.plist content.
I've tried to sign in in my apple account, but in the end I saw this message:
signin. As a result, I still cannot select my team.
Could you please give advice where am I wrong?
my problem was in a solution configuration. By some reason, I tryed to build my application in Debug|iPhone mode, not in Debug|iPhoneSimulator mode.
When I switched to Debug|iPhoneSimulator mode, then the build works fine.
You need to enable automatic signing to work with simulator
Once you’ve ensured you have an Apple ID connected to Visual Studio for Mac, you’re ready to enable Automatic Signing
Steps
In your iOS project, open the Info.plist file. In the Signing section, select your team from the Team dropdown:
Then, select the Automatically manage signing checkbox.
More Info here
I have Xcode 8.3.2 on Sierra. I am trying to build an Enterprise .ipa (have Enterprise membership).
I am having issues signing my app. Specifically in Xcode I have the following under General\Signing:
Automatically manage signing is enabled
Team: "My Team (Enterprise)"
Provisioning Profile: Xcode Managed Profile
Signing Certificate: iOS Developer
Status
Failed to create provisioning profile "com.myapp" cannot be registered to your development team. Change your bundle identifier to a unique string to try again.
No profiles for 'com.myapp' were found. Xcode couldn't find a provisioning profile matching 'com.myapp'.
My steps were:
Logged into Enterprise account at https://developer.apple.com/account/
Under Certificates, Identifiers, and Profiles I selected the Add
Selected In-House and Ad Hoc
On my MAC in the Keychain Access I selected KeyChain Access\Certificate Assistant\Request a Certificate from a Certificate Authority
Saved to my desktop
In https://developer.apple.com/account/ I uploaded the certificate signing request
I see it as a certificate as type iOS Distribution with and expiration date
I download the .cer file and double click on it to install it
Within Xcode\Preferences I find the Team under the Apple ID and under Manage Certificates I see iOS Distribution Certificates and Enterprise with today's date
I select the Download All Profiles for that team
In Xcode I select General\Signing and "My Team (Enterprise)
At this point I get the two errors described above.
I am new to Xcode development so I am sure there is something wrong with my steps.
Any insight would be greatly appreciated.
Well the solution to my issue was to do the following:
In Xcode under the "General" tab to disable Automatically manage signing
At https://developer.apple.com/account in my enterprise account under provisioning profiles I created a new distribution profile
Downloaded the profile => .mobileprovision file
Double clicked on the .mobileprovision file
With Automatically manage signing disabled I then selected the Provisioning Profile I just created and downloaded in the drop downs for Signing (Debug) and Signing (Release)
At this point I was able to archive and export an enterprise .ipa
This is the solution to my issue that's similar to this one:
Change your bundle identifier to a unique string to try again.
Your bundle identifier is already in use by other developers I guess, so just change your bundle identifier in the Identify tab right above your Signing tab to another one:
For example:
Bundle Identifier: org.react.native.example.RamenForLifeIn2022
Hope this helps :)
So, I built my app for App Store submission using my distribution profile and submitted it fine.
Now, i come to test my new update on my iPhone, and Xcode keeps telling me
"Cant run 'my app' on iPhone 'Joes iPhone'.
The iPhone “Joe’s iPhone” doesn’t have the provisioning profile with
which the application was signed.
Click “Install and Run” to install the provisioning profile
“Distribution Profile” on “Joe’s iPhone” and continue running “myapp.app”.
My configuration is Debug, and the code signing identity is set to iPhone Developer, in both the project and target settings.
How can i get Xcode to start using the developer profile again?
Thanks
I had to go to the Project menu and select "Edit Active Target" -- even though my provisioning profiles were right, that target was still set to my App Store release profile, not my development profile. I don't know the root cause of this, but it did fix the problem.
This is okay. If you click on "Install and Run" XCode will install the provisioning profile to the phone, then will install the application and run it.
Moszi
Redownloaded certificates and cleaned all targets