Using TeamCity 9.1.4.
I'm trying to get some server hostnames into a Command Line script with Configuration Parameters. I want each option to contain multiple hostnames.
My configuration:
vanmain => rad-ecr1,rad-ecr2,rad-ecr3,rad-myecr,rad-balancer
tor => rad2-bal,rad2-ecr1,rad2-ecr2,rad2-myecr
fvcdc => rad-fvcdc,rad-balancer
bccfa => rad-bccfa
When I select fvcdc in a build, I receive the following error message:
One of entered values 'rad-fvcdc' is not one of valid select item values: rad-ecr1,rad-ecr2,rad-ecr3,rad-myecr,rad-balancer,rad2-bal,rad2-ecr1,rad2-ecr2,rad2-myecr,rad-fvcdc,rad-balancer,rad-bccfa
How do I get the values into my script?
Dunkan,
I successfully reproduced your issue and was able to find out the root cause of it.
On my virtual installation I created a build with select type parameter, let's name it HostValue. Next, in Items field I copy/pasted values from your initial post and tried to reproduce the problem -- but executing the build was successful. Then I decided to reconfigure parameter and toggled Allow multiple checkbox, and viola, same error message as you got!
If you read small text below Value separator field, you will see, that default value is comma: , and as your values contain this symbol you got an error.
So, to solve this problem I can suggest you these variants:
If you don't need multiple choices, you can just turn off this feature and everything should work.
Replace default Value separator with custom one, for example <SEP>. Then whenever you will select multiple values for this parameter you will get something like:
"rad-ecr1,rad-ecr2,rad-ecr3,rad-myecr,rad-balancer"<SEP>"rad2-bal,rad2-ecr1,rad2-ecr2,rad2-myecr"<SEP>"rad-fvcdc,rad-balancer"
Replace comma in your values with some other separator, for example | or :. In this case it would look like:
"rad-ecr1:rad-ecr2:rad-ecr3:rad-myecr:rad-balancer","rad-fvcdc:rad-balancer"
After that you can use the value of this parameter as usual %HostValue% and parse depending on which variant you choose.
Maybe the error message from server could be a little bit clearer. Hope it will help you.
Also I would like to recommend you my plugin teamcity-web-parameters. It will allow you to create dynamic select values from external web service.
Take a look at this thread: https://teamcity-support.jetbrains.com/hc/en-us/community/posts/206843785-How-to-specify-empty-value-for-Typed-Parameter -- looks very similar to your question.
Related
I have a few columns in a list and one is called Supervised, the other relevant one is called Co-Supervisor.
I'm trying to force Co-Supervisor not to be blank if Supervised="Yes" but cannot get the column validation to work!
I've tried several different formulas in the Co-Supervisor column validation settings. I always get an error. Please help!
This is an example of one of the formulas I've used:
=IF([Supervised]="Yes",TRUE,FALSE)
I've also tried:
=AND([Supervised]="Yes",(NOT(ISBLANK([Co-Supervisor])))
What am I doing wrong?
Please use below formula:
GoTo List settings
GoTO validation settings
Use below mentioned formula
=IF([Supervised],IF([Co-Superviser]<>"",TRUE,FALSE),TRUE)
I have tested this on my environment and it is working fine.
(Note : Yes/No fields are internally stored as bit/boolean.So IF[Supervised] will directly evaluate to True/False.
Reference - https://sharepoint.stackexchange.com/questions/89188/calculated-column-issue-with-if-statement-and-yes-no-field
)
I have a source file that contains two fields: IP_ADDRESS and USER_NAME. I want to check whether the IP address is correct or not before loading it to the datawarehouse using DATASTAGE. How do I do this?
I was browsing Stack Overflow and think I might have a solution to your question. If you create a job to grab all of the IP_ADDRESS's from the file and send them to a BASIC transformer (search for BASIC transformer in DataStage. It is NOT the one that is normally on the palette). From there, set the Stage Variables as 'SetUserStatus() and write out the column name to a peek stage (You don't need the output at all. The SetUserStatus is the important part). This will now allow you to pass up the Command Output (list of IP Addresses) to a Sequence. From the Sequence, start with the job you just created (BASIC transformer job) and link that to a User Variables Activity. In the User Variables Activity stage, Set the name to something like 'IP Address' and Expression as IP_ADDRESS.$UserStatus. You can then use a Loop to take that output that is now a List and send each individual IP Address to an Execute Stage with a Ping command to see if it returns a valid IP Address. If it does return a valid IP then have your job that writes the USER_NAME and IP_ADDRESS to do a 'Select' statement where the IP_ADDRESS = the valid IP_ADDRESS. For the ones that aren't valid, you can send them down a different path and have them write out to '.txt' file somewhere so you know which ones weren't valid. I'm sure you will need a few more steps in there but that should be the gist of it.
Hope my quick stab at your issue helps.
Yes, you can use a transformer or a transformer and a filter to do that, depending on the version of Datastage you're using. If you're using PX, just encode the validation logic in a transformer stage, and then, on the output link set up a filter that doesn't allow the rows to pass forward if they didn't pass the validation logic.
I'm trying to use the map clause with Hive but I'm tripping over syntax and not finding many examples of my use case around. I used the map clause before when I had to process one of the columns of a table using an external script.
I had a python script called, say, run, that took one command line parameter and spit out three space separated values. So I just did:
FROM(MAP
tablename.columnName
USING
'run' AS
result1, result2, result3
FROM
tablename
) map_output
INSERT OVERWRITE TABLE results SELECT *;
Now I have a python script that receives a lot more parameters and tried a few things that didn't worked and couldn't find examples on this. I did the obvious thing:
FROM
(MAP
numAgents, alpha, beta, burnin, nsteps, thin
USING
'runAuthorityMCMC' AS numAgents, alpha, beta, energy, avgDegree, maxDegree, accept
FROM
parameters
) map_output
INSERT OVERWRITE TABLE results SELECT *;
But I got an error A user-supplied transfrom script has exited with error code 2 instead of 0. When I run runAuthorityMCMC, with 6 command line parameters sampled from that table, it works perfectly well.
It seems to me it's trying to run the script without passing the parameters at all. In one of the error messages I got exactly the output I expected if this was the case. What is the correct syntax to do what I'm trying to do?
EDIT:
Confirming - this was part of the error message:
usage: runAuthorityMCMC [-h]
numAgents normalizedBrainCapacity ecologicalPressure
burnInSteps monteCarloSteps thiningRatio
runAuthorityMCMC: error: too few arguments
Which is exactly the output I'd expect with too few arguments. The script should take six arguments.
Ok, perhaps there is a difference of vocabulary here but hive doesn't send the values as "arguments" to the script. They are read in through standard input (which is different than passing something as argument). Also, you can try sending the data to /bin/cat so see what's actually being sent to the hive. If my memory serves me right, the values are sent tab separated and result emitted out from the script is also expected to be tab separated.
Trying printing stuff from stdout (or stderr) in your script, you will see the result in your jobtracker logs. That will help you debug.
It's a long story, but I will try make it simple:
I generated MeterMaid XML files with SugarMMM; I chose only the Accounts module:
I converted above files to JMeter format with MeterMaid (I consolidated the tests into one file and named it "filename.xml"):
ruby GenMeter.rb --inputfile=filename.xml --outputfile=filename.jmx
I did the necessary CSV setup. All the CSV file contains is the login details (usr,pwd) for testing concurrent user logins. This part works well indeed.
When I run the test, I can see that a whole bunch of ${} variables are converted into corresponding values. Sadly, ${SUBPANEL_RELATE_MODULE_g1} doesn't get resolved... here's what the GET url (from View Results Tree Listener component) looks like:
http://localhost/sugarcrm/index.php?module=${SUBPANEL_RELATE_MODULE_g1}&action=Popup&hide_clear_button=true&mode=MultiSelect&create=true&metadata=undefined
Note that it's not the only variable that isn't resolved. The following screenshot shows the other tests that fail, all also caused by other variables not replaced by their corresponding values:
Here's how this variable is set up (which is well before the time it's used):
Here's what Debug Sampler says:
JMeterVariables:
CAMPAIGN_ID=CAMPAIGN_ID_ERROR
CAMPAIGN_NAME=CAMPAIGN_NAME_ERROR
CONTACT_ID=997a3171-aa60-b2d6-a457-4e0ba8b0052b
CONTACT_ID_g=4
CONTACT_ID_g0=onclick="send_back('Contacts','997a3171-aa60-b2d6-a457-4e0ba8b0052b');">Prof
CONTACT_ID_g1=onclick="send_back('Contacts','
CONTACT_ID_g2=997a3171-aa60-b2d6-a457-4e0ba8b0052b
CONTACT_ID_g3=');">
CONTACT_ID_g4=Prof
CONTACT_NAME=Prof
CONTACT_NAME_g=4
CONTACT_NAME_g0=onclick="send_back('Contacts','997a3171-aa60-b2d6-a457-4e0ba8b0052b');">Prof
CONTACT_NAME_g1=onclick="send_back('Contacts','
CONTACT_NAME_g2=997a3171-aa60-b2d6-a457-4e0ba8b0052b
CONTACT_NAME_g3=');">
CONTACT_NAME_g4=Prof
FOUND_ID=1
JMeterThread.last_sample_ok=true
JMeterThread.pack=org.apache.jmeter.threads.SamplePackage#3c1635
MEMBER_OF_ID=d7c26344-cad8-0503-b02a-4e0cb4db3985
MEMBER_OF_ID_g=4
MEMBER_OF_ID_g0=onclick="send_back('Accounts','d7c26344-cad8-0503-b02a-4e0cb4db3985');">searchSearchForm
MEMBER_OF_ID_g1=onclick="send_back('Accounts','
MEMBER_OF_ID_g2=d7c26344-cad8-0503-b02a-4e0cb4db3985
MEMBER_OF_ID_g3=');">
MEMBER_OF_ID_g4=searchSearchForm
MEMBER_OF_NAME=searchSearchForm
MEMBER_OF_NAME_g=4
MEMBER_OF_NAME_g0=onclick="send_back('Accounts','d7c26344-cad8-0503-b02a-4e0cb4db3985');">searchSearchForm
MEMBER_OF_NAME_g1=onclick="send_back('Accounts','
MEMBER_OF_NAME_g2=d7c26344-cad8-0503-b02a-4e0cb4db3985
MEMBER_OF_NAME_g3=');">
MEMBER_OF_NAME_g4=searchSearchForm
OPPORTUNITY_ID=864e402f-0d76-ab6e-b54f-4e0cb42f0249
OPPORTUNITY_ID_g=4
OPPORTUNITY_ID_g0=onclick="send_back('Opportunities','864e402f-0d76-ab6e-b54f-4e0cb42f0249');">value
OPPORTUNITY_ID_g1=onclick="send_back('Opportunities','
OPPORTUNITY_ID_g2=864e402f-0d76-ab6e-b54f-4e0cb42f0249
OPPORTUNITY_ID_g3=');">
OPPORTUNITY_ID_g4=value
OPPORTUNITY_NAME=value
OPPORTUNITY_NAME_g=4
OPPORTUNITY_NAME_g0=onclick="send_back('Opportunities','864e402f-0d76-ab6e-b54f-4e0cb42f0249');">value
OPPORTUNITY_NAME_g1=onclick="send_back('Opportunities','
OPPORTUNITY_NAME_g2=864e402f-0d76-ab6e-b54f-4e0cb42f0249
OPPORTUNITY_NAME_g3=');">
OPPORTUNITY_NAME_g4=value
RANDOM_CHAR=o
RANDOM_CHAR_g=1
RANDOM_CHAR_g0=o
RANDOM_CHAR_g1=o
RANDOM_STRING=value
RANDOM_STRING_g=1
RANDOM_STRING_g0=value
RANDOM_STRING_g1=value
RECORD_NAME=NOT_FOUND
RECORD_NUMBER=3250317d-6c79-b20d-5e36-4e0cb4746e84
RECORD_NUMBER_g=2
RECORD_NUMBER_g0=javascript:lvg_nav('Accounts', '3250317d-6c79-b20d-5e36-4e0cb4746e84
RECORD_NUMBER_g1=javascript:lvg_nav('Accounts', '
RECORD_NUMBER_g2=3250317d-6c79-b20d-5e36-4e0cb4746e84
SEARCH_FIELD=SEARCH_FIELD_ERROR
START.HMS=190308
START.MS=1309453388621
START.YMD=20110630
SUBPANEL_RELATE_MODULE=Accounts
TEAM_ID=seed-Teams8
TEAM_ID_g=4
TEAM_ID_g0=onclick="send_team_to_form('Teams','seed-Teams8');">Ball
TEAM_ID_g1=onclick="send_team_to_form('Teams','
TEAM_ID_g2=seed-Teams8
TEAM_ID_g3=');">
TEAM_ID_g4=Ball
TEAM_NAME=Ball
TEAM_NAME_g=4
TEAM_NAME_g0=onclick="send_team_to_form('Teams','seed-Teams8');">Ball
TEAM_NAME_g1=onclick="send_team_to_form('Teams','
TEAM_NAME_g2=seed-Teams8
TEAM_NAME_g3=');">
TEAM_NAME_g4=Ball
TESTSTART.MS=1309455500088
pwd=user1
usr=user1
UPDATE:
Here's after changing Template to $1$$2$$3$$4$:
And here's the Debug output (the Sampler is put just after regex Controller):
JMeterVariables:
JMeterThread.last_sample_ok=true
JMeterThread.pack=org.apache.jmeter.threads.SamplePackage#18fde89
RANDOM_CHAR=t
RANDOM_CHAR_g=1
RANDOM_CHAR_g0=t
RANDOM_CHAR_g1=t
RANDOM_STRING=Tanzania
RANDOM_STRING_g=1
RANDOM_STRING_g0=Tanzania
RANDOM_STRING_g1=Tanzania
RECORD_NAME=NOT_FOUND
RECORD_NUMBER=DOCTYPE
RECORD_NUMBER_g=1
RECORD_NUMBER_g0=DOCTYPE
RECORD_NUMBER_g1=DOCTYPE
START.HMS=100932
START.MS=1312531772599
START.YMD=20110805
SUBPANEL_RELATE_MODULE=Accounts
TESTSTART.MS=1312542237235
pwd=user1
usr=user1
Verify in your CSV dataset config, all variables are declared correctly (no typos, no omissions, no spaces before variable names, etc.)
I would also suggest putting a debug sampler high in your tree, as it will show you every variable and its value and can save a lot of time.
Edit:
It looks like your regex is setup incorrectly for creating multiple groups. If you look in your Debug sampler, you have SUBPANEL_RELATE_MODULE=Accounts but not SUBPANEL_RELATE_MODULE_g1= . This implies you don't have GROUPS setup.
In looking at your regex, the line template: $0$ is saying "only give me one group", whereas it looks like you want 4. Thus, you should try template: $1$$2$$3$$4$ the first match should be _g1 the second _g2 and so on. Check out the manual for details.
make judicious use of the ${SUBPANEL_RELATE_MODULE_g1} variable throughout the script after it gets defined by the Regular Expression Extractor. Verify it exists. Use it in Controller titles, test headings, at the beginning of tests, and at the end of tests.
That will help narrow it down
This way you can follow it along in the script to make sure it exists just before the moment it is used, and find where it's breaking down. Basically print statement debugging.
I don't know about sugar CRM or metermaid but for jmeter I had a similar problem with variable that were not resolve.
Check if this variable is declared somewhere or maybe you need to write a reg ex to extract that value from the previous request.
The problem I got It was that I extracted the variable from a CSV files
the variable name was CONTRACTNO, CLIENTNO
my URL : /SomeURL/bla?eventId=contractSelected&contractNoSelected=${CONTRACTNO}&applicationID=BLa
And it wasn't working so I changed the variable name in the csv file to :
CONTRACTNO,CLIENTNO (look that I removed a space)
Jmeter tend to be very picky with space in name and variable definition.
You are expecting the following values
${SUBPANEL_RELATE_MODULE_g1}
but you have configured the Regular Expression Extractor reference name as
"SUBPANEL_RELATE_MODULE"
There two options you can get the values
You have to change the ${SUBPANEL_RELATE_MODULE_g1} into ${SUBPANEL_RELATE_MODULE}
You have to change the Regular Expression Extractor reference name as "SUBPANEL_RELATE_MODULE _g1" to "SUBPANEL_RELATE_MODULE"
After this your values will be replaced properly.
It looks like your regular expression isn't picking up a match, your default value is set to "Accounts" and in your debug output that's the value of the variable. You'll only get match groups if the regular expression matches.
The View Results Tree listener now has a RegExp tester, so you can go to the request that you're trying to extract the variable SUBPANEL_RELATE_MODULE from the result in the results tree and choose RegExp Tester from the dropdown where it says "Text".
You can then run your regular expression on the response data in the RegExp tester and probably find that it doesn't match and then hone your regular expression so that it matches and update it in your Regular Expression Extractor.
I have a view set up to accept 2 arguments. The url is like this: playlists/video5/%/%/rss.xml
It works fine if I supply the url with 2 arguments like playlists/video5/front/coach/rss.xml.
I have 2 arguments of "Taxonomy: Term"
But I need it to run even if 1 or no arguments are supplied. It looks like you can do this with PHP Code under: Provide default argument options -> Default argument type: -> PHP Code.
I'm using this for the first one:
$arg[0] == 'all';
return 'all';
I'm using this for the second one:
$arg[1] == 'all';
return 'all';
It's working fine in the preview if I enter 1, 2 or no arguments, but in the browser it giving me a "Page not found" error if I use less than 2 arguments in the url.
It woks with these urls:
/playlists/video5/gridiron/all/rss.xml
/playlists/video5/gridiron/football/rss.xml
It does not work with this:
playlists/video5/gridiron/rss.xml
I want it to return all values when no arguments are given, or if only one arg is given, just use the one, etc...
thanks
I would rearrange your URL to look like this: playlists/video5/rss/%/% so that way your arguments always come last. Then in your argument settings set:
Action to take if argument is not present: Display all values
This way when you go to playlists/video5/rss you will get every value. When you go to /playlists/video5/rss/term1 you will get all values that have term1 in them. Then the trick for the second argument is to include the wildcard for first argument like this: /playlists/video5/rss/all/term2. I believe that will include just the values that have the second term.
Alternatively, if these are both taxonomy terms, you may want to consolidate these into a single argument and check the box that says: Allow multiple terms per argument. According to the documentation right below the checkbox, it looks like this should allow you something like playlists/video5/rss/term1+term2 and display all values that have the first or second term.
Views will only collapse the %, not the slashes surrounding it. So while you're trying to use playlists/video5/rss.xml, Views is expecting playlists/video5///rss.xml.
To get what you're looking for, you need to duplicate the View display you're using twice.
For the first duplicate, use playlists/video5/%/rss.xml as the path. In your arguments for this view display, make sure the first argument validates for either gridiron or football.
For the second duplicate, use playlists/video5/rss.xml. There will be no arguments for this view display. If you just want all of the records to show up, you shouldn't have to do anything more. But if you want to supply a default argument other than all the records, you'd override the view display and create a filter instead of an argument.
Another (less ideal) option is to treat gridiron/football as one argument and validate it that way.