I have a situation where I have a set of pixels that make up the border of a quadrilateral (very close to square). I'm trying to determine the location of the corners as best as possible and have been struggling for a while now. My first thought was to determine the straight lines of the border and then calculate the corner points, but I don't have access to OpenCV or other image processing libraries, unfortunately.
Below are three cases where the black outline is the image boundary and the red outline is the quadrilateral boundary. I have a list of all of the pixels that make up the red boundary and the red boundary thickness may vary.
My initial thought was that I could just find the pixel that is closest to each of the four image boundaries, however this won't quite work for the first case where the inner quadrilateral isn't tilted.
Any thoughts on how to tackle this problem would be great. I'm coding in dart, but am looking for a psuedocode answer that I can implement myself.
(I have seen this post, which is similar to my problem, but I think there should be a simpler solution for my problem since I have access to all of the boundary points of the quadrilateral)
Having a list of all rectangle boundary pixels, you can use simple methods like this:
Calculate gravity center of rectangle (just sum X- and Y- coordinates of pixels and divide by their number) - it is diagonal intersection.
Find the farthest pixels - they are corners.
In case of bad quality of data set (empty places, excessive pixels) center calculation might be inexact. So you can apply Hough transform to extract sides (as lines) and calculate their intersections.
I'm struggling to fit an elliptical arc to some points. The points are either from line segments or all part of the same polyline or they are generated from a bezier curve. I basically have two issues:
I would like to fit an elliptical arc to the points if it is reasonable and i straight line if that is a better fit. I'm thinking about starting at the first point and then constructing a line and a ellip_arc to the next points. The one with the lowest error wins. Or something like that at least. The problem is that an ellipse has many free parameters as opposed to a straight line. So how could I fit an ellipse arc to the points? It also has to start and stop at the points.
Fitting seems to be easiest when the ellipse arc is parameterized. Even though I find it hard to define where to start and stop the arc. But, as output, I need to have the ellipse described like in SVG format (Center Point, Minor and Major Axis, rotation to x-axis etc. https://www.w3.org/TR/SVG2/paths.html#PathDataEllipticalArcCommands). I'm not sure how to convert to this representation, or maybe I can fit it like that?
see:
Circular approximation of polygon (or its part)
If you compute this for your curve samples from local change of radius and center you could group and estimate parts of curve that belongs to the same ellipse and also its eccentricity and or a,b semiaxises sizes , center and orientation to ease up your fitting... Even if not get the precise value it will be a start point and range for ellipse parameter fitting hugely improving speed and stability of fitting
Some of the ellipse parameters might be obtained directly if your data has enough large chunks of ellipses see:
Algorithms: Ellipse matching
Fitting SVG like parameters fully will be very slow easier would be to fit just the ellipses first (center,a,b,rotation) and then convert/fit to SVG form elliptic arc. See:
Converting an svg arc to lines
Express SVG arc as series of curves
And finally you can use any fitting algorithm my favorite is this one:
approximation search
I do not code in C# so I have no idea about any existing packages for tasks like this.
On a discrete grid-based plane (think: pixels of an image), I have a closed contour that can be expressed either by:
a set of 2D points (x1,y1);(x2,y2);(x3,y3);...
or a 4-connected Freeman code, with a starting point: (x1,y1) + 00001112...
I know how to switch from one to the other of these representations. This will be the input data.
I want to get the set of grid coordinates that are bounded by the contour.
Consider this example, where the red coordinates are the contour, and the gray one the starting point:
If the gray coordinate is, say, at (0,0), then I want a vector holding:
(1,1),(2,1),(3,1),(3,2)
Order is not important, and the output vector can also hold the contour itself.
Language of choice is C++, but I'm open to any existing code, algorithm, library, pointer, whatever...
I though that maybe CGAL would have something like this, but I am unfamiliar with it and couldn't find my way through the manual, so I'm not even sure.
I also looked toward Opencv but I think it does not provide this algorithm (but I can be wrong?).
I was thinking about finding the bounding rectangle, then checking each of the points in the rectangle to see if they are inside/outside, but this seems suboptimal. Any idea ?
One way to solve this is drawContours, and you have contours points with you.
Create blank Mat and draw contour with thickness = 1(boundary).
Create another blank Mat and draw contour with thickness = CV_FILLED(whole area including boundary).
Now bitwise_and between above two(you got filled area excluding boundary).
Finally check for non-zero pixel.
Suppose I have an image of a scene as depicted above. A sort of a pole with a blob on it next to possibly similar objects with no blobs.
How can I find the blob marked by the red circle (a binary image indicating which pixels belong to the blob).
Note that the pole together with the blob may be rotated arbitrarily and also size may vary.
Can you try to do it in below 4 steps?
Circle detection like: writing robust (color and size invariant) circle detection with opencv (based on Hough transform or other features)
Line detection, like: Finding location of rectangles in an image with OpenCV
Identify rectangle position by combining neighboring lines (For each line segment you have the start and end point position, you also know the direction of each line segment. So that you can figure out if two connecting line segments (whose endpoints are close) are orthogonal. Your goal is to find 3 such segments for each rectangle.)
Check the relative position of each circle and rectangle to see if any pair can form the knob shape.
One approach could be using Viola-Jones object detection framework.
Though the framework is mostly used for face detection - it is actually designed for generic objects you feed to the algorithm.
The algorithm basic idea is to feed samples of "good object" (what you are looking for) and "bad objects" to a machine learning algorithm - which generates patterns from the images as its features.
During Classification - using a sliding window the algorithm will search for a "match" to the object (the classifier returned a positive answer).
The algorithm uses supervised learning and thus requires a labeled set of examples (both positive and negative ones)
I'm sure there is some boundary-map algorithm in image processing to do this.
Otherwise, here is a quick fix: pick a pixel at the center of the
"undiscovered zone", which initially is the whole image.
trace the horizantal and vertical lines at 4 directions each ending at the
borders of the zone and find the value changes from 0 to 1 or the vice verse.
Trace each such value switch and complete the boundary of each figure (Step-A).
Do the same for the zones
that still are undiscovered: start at some center
point and skim thru the lines connecting the center to the image border or to a
pixel at the boundary of a known zone.
In Step-A, you can also check to see whether the boundary you traced is
a line or a curve. Whenever it is a curve, you need only two points on it--
points at some distance from one another for the accuracy of the calculation.
The lines perpendicular each to these two points of tangency
intersect at the center of the circle red in your figure.
You can segment the image. Then use only the pixels in the segments to contribute to a Hough-transform to find the circles.
Then you will only have segments with circle in them. You can use a modified hough transform to find rectangles. The 'best' rectangle and square combination will then be your match. This is very computationally intentsive.
Another approach, if you already have these binary pictures, is to transform to a (for example 256 bin) sample by taking the distance to the centroid compared to the distance travelled along the edge. If you start at the point furthest away from the centroid you have a fairly rotational robust featurevector.
I've been working on a visualization project for 2-dimensional continuous data. It's the kind of thing you could use to study elevation data or temperature patterns on a 2D map. At its core, it's really a way of flattening 3-dimensions into two-dimensions-plus-color. In my particular field of study, I'm not actually working with geographical elevation data, but it's a good metaphor, so I'll stick with it throughout this post.
Anyhow, at this point, I have a "continuous color" renderer that I'm very pleased with:
The gradient is the standard color-wheel, where red pixels indicate coordinates with high values, and violet pixels indicate low values.
The underlying data structure uses some very clever (if I do say so myself) interpolation algorithms to enable arbitrarily deep zooming into the details of the map.
At this point, I want to draw some topographical contour lines (using quadratic bezier curves), but I haven't been able to find any good literature describing efficient algorithms for finding those curves.
To give you an idea for what I'm thinking about, here's a poor-man's implementation (where the renderer just uses a black RGB value whenever it encounters a pixel that intersects a contour line):
There are several problems with this approach, though:
Areas of the graph with a steeper slope result in thinner (and often broken) topo lines. Ideally, all topo lines should be continuous.
Areas of the graph with a flatter slope result in wider topo lines (and often entire regions of blackness, especially at the outer perimeter of the rendering region).
So I'm looking at a vector-drawing approach for getting those nice, perfect 1-pixel-thick curves. The basic structure of the algorithm will have to include these steps:
At each discrete elevation where I want to draw a topo line, find a set of coordinates where the elevation at that coordinate is extremely close (given an arbitrary epsilon value) to the desired elevation.
Eliminate redundant points. For example, if three points are in a perfectly-straight line, then the center point is redundant, since it can be eliminated without changing the shape of the curve. Likewise, with bezier curves, it is often possible to eliminate cetain anchor points by adjusting the position of adjacent control points.
Assemble the remaining points into a sequence, such that each segment between two points approximates an elevation-neutral trajectory, and such that no two line segments ever cross paths. Each point-sequence must either create a closed polygon, or must intersect the bounding box of the rendering region.
For each vertex, find a pair of control points such that the resultant curve exhibits a minimum error, with respect to the redundant points eliminated in step #2.
Ensure that all features of the topography visible at the current rendering scale are represented by appropriate topo lines. For example, if the data contains a spike with high altitude, but with extremely small diameter, the topo lines should still be drawn. Vertical features should only be ignored if their feature diameter is smaller than the overall rendering granularity of the image.
But even under those constraints, I can still think of several different heuristics for finding the lines:
Find the high-point within the rendering bounding-box. From that high point, travel downhill along several different trajectories. Any time the traversal line crossest an elevation threshold, add that point to an elevation-specific bucket. When the traversal path reaches a local minimum, change course and travel uphill.
Perform a high-resolution traversal along the rectangular bounding-box of the rendering region. At each elevation threshold (and at inflection points, wherever the slope reverses direction), add those points to an elevation-specific bucket. After finishing the boundary traversal, start tracing inward from the boundary points in those buckets.
Scan the entire rendering region, taking an elevation measurement at a sparse regular interval. For each measurement, use it's proximity to an elevation threshold as a mechanism to decide whether or not to take an interpolated measurement of its neighbors. Using this technique would provide better guarantees of coverage across the whole rendering region, but it'd be difficult to assemble the resultant points into a sensible order for constructing paths.
So, those are some of my thoughts...
Before diving deep into an implementation, I wanted to see whether anyone else on StackOverflow has experience with this sort of problem and could provide pointers for an accurate and efficient implementation.
Edit:
I'm especially interested in the "Gradient" suggestion made by ellisbben. And my core data structure (ignoring some of the optimizing interpolation shortcuts) can be represented as the summation of a set of 2D gaussian functions, which is totally differentiable.
I suppose I'll need a data structure to represent a three-dimensional slope, and a function for calculating that slope vector for at arbitrary point. Off the top of my head, I don't know how to do that (though it seems like it ought to be easy), but if you have a link explaining the math, I'd be much obliged!
UPDATE:
Thanks to the excellent contributions by ellisbben and Azim, I can now calculate the contour angle for any arbitrary point in the field. Drawing the real topo lines will follow shortly!
Here are updated renderings, with and without the ghetto raster-based topo-renderer that I've been using. Each image includes a thousand random sample points, represented by red dots. The angle-of-contour at that point is represented by a white line. In certain cases, no slope could be measured at the given point (based on the granularity of interpolation), so the red dot occurs without a corresponding angle-of-contour line.
Enjoy!
(NOTE: These renderings use a different surface topography than the previous renderings -- since I randomly generate the data structures on each iteration, while I'm prototyping -- but the core rendering method is the same, so I'm sure you get the idea.)
Here's a fun fact: over on the right-hand-side of these renderings, you'll see a bunch of weird contour lines at perfect horizontal and vertical angles. These are artifacts of the interpolation process, which uses a grid of interpolators to reduce the number of computations (by about 500%) necessary to perform the core rendering operations. All of those weird contour lines occur on the boundary between two interpolator grid cells.
Luckily, those artifacts don't actually matter. Although the artifacts are detectable during slope calculation, the final renderer won't notice them, since it operates at a different bit depth.
UPDATE AGAIN:
Aaaaaaaand, as one final indulgence before I go to sleep, here's another pair of renderings, one in the old-school "continuous color" style, and one with 20,000 gradient samples. In this set of renderings, I've eliminated the red dot for point-samples, since it unnecessarily clutters the image.
Here, you can really see those interpolation artifacts that I referred to earlier, thanks to the grid-structure of the interpolator collection. I should emphasize that those artifacts will be completely invisible on the final contour rendering (since the difference in magnitude between any two adjacent interpolator cells is less than the bit depth of the rendered image).
Bon appetit!!
The gradient is a mathematical operator that may help you.
If you can turn your interpolation into a differentiable function, the gradient of the height will always point in the direction of steepest ascent. All curves of equal height are perpendicular to the gradient of height evaluated at that point.
Your idea about starting from the highest point is sensible, but might miss features if there is more than one local maximum.
I'd suggest
pick height values at which you will draw lines
create a bunch of points on a fine, regularly spaced grid, then walk each point in small steps in the gradient direction towards the nearest height at which you want to draw a line
create curves by stepping each point perpendicular to the gradient; eliminate excess points by killing a point when another curve comes too close to it-- but to avoid destroying the center of hourglass like figures, you might need to check the angle between the oriented vector perpendicular to the gradient for both of the points. (When I say oriented, I mean make sure that the angle between the gradient and the perpendicular value you calculate is always 90 degrees in the same direction.)
In response to your comment to #erickson and to answer the point about calculating the gradient of your function. Instead of calculating the derivatives of your 300 term function you could do a numeric differentiation as follows.
Given a point [x,y] in your image you could calculate the gradient (direction of steepest decent)
g={ ( f(x+dx,y)-f(x-dx,y) )/(2*dx),
{ ( f(x,y+dy)-f(x,y-dy) )/(2*dy)
where dx and dy could be the spacing in your grid. The contour line will run perpendicular to the gradient. So, to get the contour direction, c, we can multiply g=[v,w] by matrix, A=[0 -1, 1 0] giving
c = [-w,v]
Alternately, there is the marching squares algorithm which seems appropriate to your problem, although you may want to smooth the results if you use a coarse grid.
The topo curves you want to draw are isosurfaces of a scalar field over 2 dimensions. For isosurfaces in 3 dimensions, there is the marching cubes algorithm.
I've wanted something like this myself, but haven't found a vector-based solution.
A raster-based solution isn't that bad, though, especially if your data is raster-based. If your data is vector-based too (in other words, you have a 3D model of your surface), you should be able to do some real math to find the intersection curves with horizontal planes at varying elevations.
For a raster-based approach, I look at each pair of neighboring pixels. If one is above a contour level, and one is below, obviously a contour line runs between them. The trick I used to anti-alias the contour line is to mix the contour line color into both pixels, proportional to their closeness to the idealized contour line.
Maybe some examples will help. Suppose that the current pixel is at an "elevation" of 12 ft, a neighbor is at an elevation of 8 ft, and contour lines are every 10 ft. Then, there is a contour line half way between; paint the current pixel with the contour line color at 50% opacity. Another pixel is at 11 feet and has a neighbor at 6 feet. Color the current pixel at 80% opacity.
alpha = (contour - neighbor) / (current - neighbor)
Unfortunately, I don't have the code handy, and there might have been a bit more to it (I vaguely recall looking at diagonal neighbors too, and adjusting by sqrt(2) / 2). I hope this enough to give you the gist.
It occurred to me that what you're trying to do would be pretty easy to do in MATLAB, using the contour function. Doing things like making low-density approximations to your contours can probably be done with some fairly simple post-processing of the contours.
Fortunately, GNU Octave, a MATLAB clone, has implementations of the various contour plotting functions. You could look at that code for an algorithm and implementation that's almost certainly mathematically sound. Or, you might just be able to offload the processing to Octave. Check out the page on interfacing with other languages to see if that would be easier.
Disclosure: I haven't used Octave very much, and I haven't actually tested it's contour plotting. However, from my experience with MATLAB, I can say that it will give you almost everything you're asking for in just a few lines of code, provided you get your data into MATLAB.
Also, congratulations on making a very VanGough-esque slopefield plot.
I always check places like http://mathworld.wolfram.com before going to deep on my own :)
Maybe their curves section would help? Or maybe the entry on maps.
compare what you have rendered with a real-world topo map - they look identical to me! i wouldn't change a thing...
Write the data out as an HGT file (very simple digital elevation data format used by USGS) and use the free and open-source gdal_contour tool to create contours. That works very well for terrestrial maps, the constraint being that the data points are signed 16-bit numbers, which fits the earthly range of heights in metres very well, but may not be enough for your data, which I assume not to be a map of actual terrain - although you do mention terrain maps.
I recommend the CONREC approach:
Create an empty line segment list
Split your data into regular grid squares
For each grid square, split the square into 4 component triangles:
For each triangle, handle the cases (a through j):
If a line segment crosses one of the cases:
Calculate its endpoints
Store the line segment in the list
Draw each line segment in the line segment list
If the lines are too jagged, use a smaller grid. If the lines are smooth enough and the algorithm is taking too long, use a larger grid.