I want to install Rstudio for ubuntu, so I used the link https://www.rstudio.com/products/rstudio/download/ after that I choosen RStudio 0.99.893 - Ubuntu 12.04+/Debian 8+ (64-bit) then I opened with Ubuntu software center. In that I clicked the install button I got error box like this,
Requires installation of untrusted packages
This requires installing packages from unauthenticated sources.
How to solve this problem?
The unauthenticated package required by RStudio is libjpeg62, so install the package separately and then install rstudio from software center
In the terminal run the following for installing libjpeg62
sudo apt-get install --allow-unauthenticated libjpeg62
Then go back to installing rstudio.
Note: you need to install r interpretor along with rstudio this you can do by following
sudo apt-get install r-base
# Install R and RStudio on Ubuntu 14.04
sudo apt-get update
sudo apt-get install r-base
sudo apt-get install r-base-dev
# Download and Install RStudio
sudo apt-get install gdebi-core
wget https://download1.rstudio.org/rstudio-1.0.44-amd64.deb
sudo gdebi rstudio-1.0.44-amd64.deb
Runs following commands :
In order to install RStudio on Ubuntu 18.04 we will first need to install the r-base package. Open up terminal and enter:
$ sudo apt update
$ sudo apt -y install r-base
To install DEB file on Ubuntu Linux is by using the gdebi command.
In case gdebi is not available on your system you can install it by executing the bellow command:
$ sudo apt install gdebi-core
All Package(builds) are available : in this link or link. You can select different package.
I had download and install : rstudio-xenial-1.1.463-amd64.deb build(package) from above in this link.
$ wget https://s3.amazonaws.com/rstudio-dailybuilds/rstudio-xenial-1.1.463-amd64.deb
$ sudo gdebi rstudio-xenial-1.1.463-amd64.deb
To Start R-Studdio from following command :
$ rstudio
Related
I am using FAI to make a custom Debian installer. I am trying to make a script to install vscode and newrelic.
wget https://code.visualstudio.com/sha/download?build=stable&os=linux-deb-x64
sudo apt install ./code_1.74.2-1671533413_amd64.deb
sudo apt install apt-transport-https
sudo apt update
sudo apt install code
Could I have help on installing the newrelic monitoring tool for Debian and improve the VS Code download?
Thank you!
I already tried the vs code install script and it did not work.
I have installed anaconda on my kali linux OS. I am getting Rstudio as an option to install on navigator but when I click on it, it just loads and there is no progress. I even used terminal to do so, but it just points out some problems and is unable to fix it. I can't even find an option on Rstudio website to install for kali linux OS.
Use the following command to install Rstudio on Kali linux:
sudo apt update<br>
sudo apt -y upgrade<br>
sudo apt -y install r-base<br>
wget https://download1.rstudio.org/desktop/debian9/x86_64/rstudio-1.2.5042-amd64.deb<br>
sudo apt install ./rstudio-1.2.5042-amd64.deb<br>
If you encounter any dependency problems, run:
sudo apt -f install
For starting Rstudio, run:<br>
$ rstudio
Source: https://computingforgeeks.com/how-to-install-r-and-rstudio-on-ubuntu-debian-mint/
I'm used to tortoise SVN. But after switching to centos 7 it is very difficult to use it without GUI. Please Help me install RabbitVCS instead.
The below instructions worked for me in May 2019. YMMV.
Install EPEL Release
export http_proxy=http://{proxyhost}:{port}
wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
sudo yum install epel-release-latest-7.noarch.rpm
Install Pre-requisites
sudo yum install meld pysvn python-dulwich python-simplejson
Fetch RabbitVCS packages
export ftp_proxy=$http_proxy
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/hmandevteam/CentOS_7/noarch/rabbitvcs-core-0.17.1-3.2.noarch.rpm
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/hmandevteam/CentOS_7/noarch/rabbitvcs-cli-0.17.1-3.2.noarch.rpm
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/hmandevteam/CentOS_7/noarch/python2-rabbitvcs-0.17.1-3.2.noarch.rpm
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/hmandevteam/CentOS_7/noarch/rabbitvcs-nautilus-0.17.1-3.2.noarch.rpm
Install RabbitVCS packages
sudo yum install rabbitvcs-core-0.17.1-3.2.noarch.rpm
sudo yum install rabbitvcs-cli-0.17.1-3.2.noarch.rpm
sudo yum install python2-rabbitvcs-0.17.1-3.2.noarch.rpm
sudo yum install rabbitvcs-nautilus-0.17.1-3.2.noarch.rpm
Reboot
sudo reboot
Open File Manager and you can see RabbitVCS Menu
If the above rpm ftp locations become stale, goto http://rpm.pbone.net and search for the following packages with Centos 7 filter -
rabbitvcs-core
rabbitvcs-cli
python2-rabbitvcs
rabbitvcs-nautilus
You may find these packages at other locations too
NOTE: You may sometimes require these pre-requisite packages too pygtk, python-configobj, python-gobject, python-gtkspell, python-svn
I had same problem when working with centos7, ended up using thunar instead of nautilus. See stackexchange and github issue.
Update:
I have successfully build rabbitVCS following steps from the github.com and then copied the nautilus extension.
I want to install only Ruby, not Ruby on Rails, I check this command:
sudo apt-get install ruby-full -g
But the terminal report me this error:
E:Command line option 'g' [from -g] is not known
This command will install the latest stable Ruby version and will make it
available globally (through the '-g' parameter) on your system environment...
Why do I get this error?
Update your package manager first:
sudo apt-get update
This must finish without error or the following step will fail.
Install curl:
sudo apt-get install curl
You’ll use curl for installing RVM.
Install RVM
curl -L https://get.rvm.io | bash -s stable --ruby
You Already Have RVM Installed
If you already have RVM installed, update it to the latest version and install Ruby:
rvm get stable --autolibs=enable
Install Ruby:
rvm install ruby
apt-get install ruby-full
apt (Debian or Ubuntu)
Debian GNU / Linux and Ubuntu use the apt package manager. You can use it as follows:
font: https://www.ruby-lang.org/pt/documentation/installation/
-g is not an option of apt-get. There is nothing like "global" install in apt-get. Everything is installed globally. If you want to install the ruby-full package, just do
sudo apt-get install ruby-full
Another option is to install ruby via rvm.io or rbenv
I am doing host target development within scratchbox. And apt-get is not installed in my target raspbian rootfile system.
What is the right apt-get package to use from here for raspbian ?
http://www.apt-get.org/main/
Should i use wget command for .deb package of apt-get ?
http://www.cyberciti.biz/tips/linux-wget-your-ultimate-command-line-downloader.html
http://www.thegeekstuff.com/2009/09/the-ultimate-wget-download-guide-with-15-awesome-examples/#more-1885
dpkg is installed in root filesystem of my target, i have checked it using whereis command
Please suggest, or can you suggest some link for installing apt-get itself. I am not able to find something related to it.
Any reply will be appreciable.
Looks like maybe debian apt package will get you there. I thought apt was just ubuntu but no.
The Raspbian FAQ is here: http://www.raspbian.org/RaspbianFAQ
In it you can grab a list of apps included in Rasbian:
http://archive.raspbian.org/raspbian/dists/wheezy/main/binary-armhf/Packages
You can grab the Raspbian package archive here:
http://archive.raspbian.org/raspbian/dists/wheezy/main/binary-armhf/Packages.gz
Extract it, then use dpkg to install apt-get.
Install Putty.exe and login with putty to your raspbian with ip-adress of your raspbian and you can install apt-get!
Install the following:
sudo apt-get update;
sudo apt-get install gcc;
sudo apt-get install autoconf;
sudo apt-get install libtool;
sudo apt-get install pkg-config;
sudo apt-get install libselinux1-dev;
sudo apt-get install liblockdev1-dev;
sudo apt-get install gawk;
sudo apt-get install g++;
sudo apt-get install c++;
sudo apt-get install libgudev-1.0-dev;
sudo apt-get install libudev-dev;
mkdir -p $HOME/distr/libcec;
wget -P $HOME/distr/libcec https://github.com/Pulse-Eight/libcec/archive/master.zip;
unzip $HOME/distr/libcec/master.zip -d $HOME/distr/libcec/;
cd $HOME/distr/libcec/libcec-master ./bootstrap;"
./configure --with-rpi-include-path=/opt/vc/include --with-rpi-lib-path=/opt/vc/lib --enable-rpi;
make;
sudo make install;
sudo apt-get install cec-utils;
sudo apt-get update
sudo apt-get dist-upgrade
sudo rpi-update
sudo reboot
After the reboot, is everything up-to-date and you have no problems anymore!