I have a VS2013 solution which includes unit test projects. When I open the solution and rebuild it in VS2015 Enterprise, I get numerous errors of the pattern
CS0246 The type or namespace XXXX_Accessor could not be found
Is this a VS2015 issue? Does VS2015 Enterprise no longer support Accessors? The solution builds perfectly well in VS2013 Pro, and I can't see any missing references in the project References lists in Solution Explorer
TIA
Doh! It turns out that accessors were deprecated in VS2010 (which we skipped when we upgraded from VS2008) but continued to work up to VS2013. In VS2015, which we are now trialling, they don't compile so have to be expunged from the test projects and (this is our way of resolving the subsequent visibility errors) the test code amended to use 'real' classes instead of the accessors and private members accessed by the tests changed to internal. Much simpler than using reflection, as suggested by others who have encountered this problem.
Related
We are using Visual Studio 2012 and Team Foundation Server 2010 in our project. Since, we are using Microsoft Fakes, we could have not used the started Test functionality of our Team Build 2010, I have created a build activity which invokes VSTest.Console.exe passing the test assemblies. This approach has been working well for us. However, after a recent check-in we are getting the following error when executing Vstest.console.exe
Error: An exception occurred while invoking executor 'executor://mstestadapter/v1': Object reference not set to an instance of an object.
I copied the binary files to my local machine and was able to get the error again. Interestingly, we run a dev build before check-in which runs the same vstest.console.exe with the same parameters and that works correctly. I have got two folders on my machine, for one the call works fine and for other it doesn't. The compiled assemblies look same size and there aren't much differences to suggest.
I tried using Process Monitor but couldn't find anything obvious other than that the process returns with an exit code 1. Does anybody know much about this error? Is there any way I can find out more information from my test run?
Regards,
Hamid
We got to the bottom of the problem. We are using Entity Framework 5.0 and we also have a situation where some of our test assemblies are targeting .Net 4.0 and some are targeting .Net 4.5.
When we are trying to run the tests such that assemblies targeting different versions of .Net framework and using Entity Framework 5.0 are run in the same Test (vstest.console.exe) process, we get this error.
I think this has to do with the way Entity Framework 5.0 ships with two versions (net40 and net45). Once one version of the library is loaded in the process, the other version cannot be loaded and this caused the error.
I had the same error message just now with Visual Studio 2017 using the new MSTest.Framework and MSTest.TestAdapter (to be able to use Live Unit Testing). It turned out I was using multiple versions of those packages in my solution. Consolidating them to the latest version solved the problem.
This is what worked for me:
In Visual Studio, Test -> Test Settings -> Default Processor Architecture -> X64.
Though it might not solve everyone's issue, hope it helps some of you out there.
I have the same error specified in the subject when in the AssemblyInfo of the project is specified the AssemblyAttribute:
[assembly: AssemblyCulture("en")]
If this attribute is present, the run of the unit tests fails.
If I remove this line of code or I remove the en language, the run of the unit tests success.
An exception occurred while invoking executor 'executor://mstestadapter/v2'
I had multiple TestAdapter's and TestFramework's in my BuildAgents Folder, deleting the v1.1.11 versions fixed the issue:
This happened to me recently in VS 2019. Using NuGet to update to the latest versions of MSTest.TestAdapter and MSTest.TestFramework solved the problem for me.
I tried everything on the web to solve this exception. Finally I solved this issue by installing the Update v4 of Visual Studio 2013 (which is that I'm using currently). Hope it helps!
Deleting app.config and packages.config, if exists, and reinstalling Entity framework via nuGet packages works for me.
I'm trying to move my VS 2008 solution to VS 2010. Everything works perfectly (compile and link) if I keep the target framework at 4.0.
When I change the framework 2.0 and change the platform framework v100 (to get past compile errors) only to run into metadata linking errors, like this one:
error LNK2022: metadata operation failed (80131195) : Custom attributes are not consistent: (0x0c0000f7). C:\Development\Main\Filemaster\SoxService\MSVCMRTD.lib(managdeh.obj)
I've read that I'm supposed to use ILDAsm but it doesn't like my obj file and since the link didn't complete I don't have an exe to load.
Can anyone please provide some advice on how to find the sorts of errors?
I hate nothing worse than fighting the tool!
I was able to get around this problem by going into the project XML file itself and changing the TargetFramework to be 4.0 After that everything compiled and linked fine.
Hans he is referring to C++ Native Multi-Targeting which can be found at this location Platform Framework can be changed under project Properties > General and is advised by the article - however this does not work due to apparent bugs in VC++
Why do I get the following error when building a setup project?
An error occurred while validating. HRESULT = '80004005'
One project in solution had ToolsVersion="4.0" (in .csproj file), changed it to ToolsVersion="3.5" and setup project builds fine.
Both of the reasons I found are already in other answers, but they are in separate answers and not fully explained. So, hopefully this will combine the possibilities and give good means of debugging each. :)
Common Reason
My problem was not a dependency error. However, that does seem to be the common reason. So, basically, you need to check your MSI file and make sure that all dependencies are still valid. Probably the best blog response on how you can easily resolve this if it is a dependency issue is An error occurred while validating. HRESULT = '80004005'.
Extract from blog:
Follow steps below to troubleshoot.
If you have multiple project outputs in your solution, identify the project that is giving the problem. You can do that by removing one project at a time from the Setup Project(S) until error goes away.
Once project is identified, identify the reference that could be giving the problem.
Check if the project(A) is referencing to a project that has been removed from solution. - Remove such references if any.
Check if the Project(A) is referencing to a project that was moved to a diffenrent physical location after it was added as a reference. - Remove and add such references.
Rebuild setup project after fixing the reference accordingly to see if error goes away.
Alternative Reason
My problem had to do with Visual Studio versioning, however. So, if your dependencies are valid and you still are getting this problem, then you resolve this if it is a problem with VS2010 .
Basically, if you run MSBuild and see this warning:
Project file contains ToolsVersion="4.0", which is not supported by
this version of MSBuild. Treating the project as if it had
ToolsVersion="3.5"
Then the problem is Visual Studio versioning. This means that one project was opened or created in Visual Studio 2010 and then saved or added to an existing 3.5 solution. I simply searched all files in my project for ToolsVersion="4.0" and found the offending .csproj file, opened it in a text editor and manually changed the 4.0 to a 3.5.
This error is related to a dependency error. I removed all references to my primary output project and added them again. It now compiles OK!
I ran up against this issue today. The solution in my case? Restart Visual Studio 2008.
In my case my solution (VS2008) had a project that was also referenced from another solution (VS2010). In the VS2010 solution I had upgraded the project to .NET 4.0. When I later realized the project was also used in another solution I downgraded it to .NET 3.5. For some reason everything seemed to be changed correctly in the csproj file except one place which is mentioned here: Error in setup project HRESULT = '80004005'
I know this is already solved somewhere else but I wanted to shed some light on this from another problem angle.
While simply removing and re-adding the project dependencies will work in many cases, it is important to note that:
The error message "An error occurred while validating. HRESULT=80004005."
usually happens when project is referenced to the other project which is
not added into the currect [sic] solution. Setup project only supports
dependency projects within same solution.1
I have spent enormous time on this one myself, though none of the above worked. But I have found another solution with a registry hack, you need to add a new DWORD (EnableOutOfProcBuild) value of (0) to HKCU\SOFTWARE\Microsoft\VisualStudio\14.0_Config\MSBuild\EnableOutOfProcBuild
Note: this is for Visual Studio 2015
In my case I had installed Visual Studio 2010 alongside Visual Studio 2008. My setup project, when opened in Visual Studio 2008 gave the same error, but was OK in Visual Studio 2010.
If copied to another machine that did not have Visual Studio 2010, but did have Visual Studio 2008, then it would compile.
I installed Visual Studio 2010 and converted the solutions to that version. Because of performance issues I changed my solutions back to Visual Studio 2008. Everything was better now but I got an error when I tried to compile the setup project. I realized that I had a Visual Studio 2010 Test Project in my solution so all I had to do was unload the Test Project and Build the setup project again.
Summary: unload any Visual Studio 2010 project in solution.
I hope it helps.
I know this is kinda old news, but my particular issue and solution are not specifically stated here (as far as I can tell - if I missed it, I apologize).
I had same problem. It would not compile my project, but had no errors. All I could see was "Build Failed". I opened up the "Output" file (Click View--> Output on menu), and it told me exactly which reference (in my case a .dll) was causing the problem.
I deleted and recreated the reference and it changed the reference name from Microsoft.Office.Core (which was appearently only a 32 bit version) to "OFFICE". Then everything worked great. -- Make sure to make a note of the path to the file you are referencing in the properties window... My new path was exactly the same, but the reference name changed anyway.... still scratching my head on that one...
So the moral of the story is... When you get no errors and your build fails, check the "Output" tab and it might help.
I read this answer from another post on Stack Overflow, and it has worked for me.
Open your setup project file (.vdproj) in Notepad (or any other text editor). Delete these lines at a beginning of the .vdproj file:
"SccProjectName" = "8:"
"SccLocalPath" = "8:"
"SccAuxPath" = "8:"
"SccProvider" = "8:"
Build again - the error is gone. That error didn't stop me from deploying, building, debugging (or anyting) my project; it just annoyed me. And it came on even if I set all projects to be build in a current configuration and the setup project not to.
Duplicate: Why are C# collection-properties not flagged as obsolete when calling properties on them?
I just migrated a .NET 1.1 project to .NET 2.0 using Visual Studio 2008. I know that there are references to obsolete methods in the project.
But Visual Studio does not show "obsolete"-warnings after building. The build succeeds and shows only 3 warnings from members that are assigned a value that is never used. When I remove these members there are no warnings at all.
I NEED THESE "OBSOLETE"-WARNINGS
The Warning level is 4 (maximum), Warnings are enabled.
Just one sample:
protected internal DataConnector()
{
_connectionString = ConfigurationSettings.AppSettings["ProductConnectionString"];
}
All references that should result in an "obsolete"-warning are to members of classes of the .NET Framework.
Is the code calling the obsolete method(s) itself flagged as obsolete?
Just taking a shot in the dark here, but is the usage of an obsolete member taking place in a project that you're REFERENCING, and when you're building it isn't actually rebuilding that project? If that's a possibility, I would try manually building the project where the usage is taking place, or just rebuilding the entire solution.
Make sure you are doing a full build on the project, not just an incremental build.
Jeff Yates is right, this is a duplicate to Why are C# collection-properties not flagged as obsolete when calling properties on them?
It is a bug in the C# 3.5 compiler reported here:
https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=417159
I checked it: copied the csc.exe commandline from the output window to a cmd-console. When I change the directory to the .NET 2.0 directory (using C# 2.0 compiler), it shows the warnings. Microsoft knows this bug and fixed it in C# 4.0 but will not fix it in the 3.5 version.
I am using the open source Saxon XSLT processor for .NET to execute some 2.0 transforms.
I reference the saxon9api.dll as I would any other dll, and can compile code against this. However Visual Studio does not show any intellisense making the IDE as useful as notepad.
The saxon9api.dll is using the IKVM Java for .NET platform, and I wonder if this is the causing VS a problem. Reflector can inspect the DLL without issue, but I suspect VS is not happy for some reason.
Any ideas?
EDIT:
Surprised that no one else has encountered this behaviour seeing as Microsoft recommends (link is now dead) the use of Saxon in the absense of built in functionality in the framework.
I think I will reword the question to be about assemblies running under IKVM not showing intellisense although I will need to find another IKVM based project to prove that this is the case first...
To make compiling, running and intellisense work in Visual Studio, you need to do the following:
Reference saxon9api.dll, as you already did
Reference IKVM.OpenJDK.Core.dll
Reference IKVM.Runtime.dll (not sure this is needed, but I always include it)
If you are also referencing vjslib, you may run into issues, because it uses a lot of the same namespaces and classnames, leading to ambiguities that can cause Visual Studio's intellisense to get into problems. Perhaps other libraries exist that show the same namespace clashes. In that case, try this on a fresh project first and add the references one by one, starting with Saxon's dependencies first.
After you do this, at least in Visual Studio 2010, 2012 and 2013, you will find that the context-sensitive help is working (image is of VS 2012 with R#):
Note: since this post is old, it may have only applied to Visual Studio 2008 at the time, I have not tested that as I am not using it anyore.