I am working with a Raspberry Pi running linux, and have modified the .bash_profile file in order to a run a program I've made automatically upon login. This works great, but I was wondering how to turn the program off, since for ctrl+c I would need to be running the program in the terminal.
You can use Kill to terminate program by its process Id, Top command will list all the processes, You can also use Pkill, which will Terminate the process by its name.
-9 option forces process to shut down, so its very commonly used.
Example:
kill -9 "Process ID without Quotation marks"
pkill -9 "Name with Quotation marks (Case Sensitive)"
Check this.
I always use
pkill - f processname
Related
On linux device, the following process ID runs:
I'm trying to kill the process ids related to ads2 (shown in the image above) remotely (through a bash script that runs on another device). So I tried:
ssh nvidia#"id-address" "kill pgrep ads2"
where pgrep returns the process IDs related to ads2. When i run the script it prompts me to enter the password and then nothing happen, i mean the processes are not terminated.
However, i can't figure out where the error is.
Thanks in advance
kill expects a number (or list of numbers) following it. pgrep ads2 is just words!
For bash to replace the words pgrep ads2 with the result of running that command to produce kill 15951 15995 you can use backticks.
i.e. : kill `pgrep ads2` will first run pgrep ads and then kill (result of pgrep ads2)
However, as you are performing this over ssh, your computer would run the backticks before the remote. I.e. pgrep ads would be run on your local machine, and kill on the remote, which wouldn't work. So you must escape the backticks like so:
ssh nvidia#"id-address" "kill \`pgrep ads2\`"
I'm trying to achieve the following:
from a fish script, open a PDF reader as a background job. Once it is opened, spawn another fish process (that runs an infinite while loop), also as a background job.
Next, open an editor (neovim) and allow it to take control of the running terminal. Once neovim terminates, also suspend the previous 2 background jobs (mupdf and the other fish process).
My current attempt looks something along the lines of:
mupdf $pdfpath &
set pid_mupdf $last_pid
fish -c "while inotifywait ...; [logic to rebuild the pdf file..]; end" &
set pid_sub $last_pid
nvim $mdpath && kill -2 $pid_mudf $pid_sub
First I open mupdf as a background job and save its PID in a variable. Next I spawn the other fish process, also as a background job, and I save its PID as well.
Next I run nvim (but not as a background job, as I intend to actually control it), and after it is terminated by the user, I gracefully kill the previous 2 background jobs.
However this doesn't work as intended.
mupdf and the second fish process open successfully, and so does nvim, but it quickly closes after around half a second, after which I get the following in the controlling terminal window: image (bote is just the filename of the script from which the lines above originate)
The 2 background processes stay running after that and I have to kill them manually.
I understand that the script is sent a SIGHUP because the controlling terminal now executes another application (neovim), but why does neovim close after that?
I also tried disowning the background processes after they're spawned but that didn't help.
How would I solve this issue?
The problem is that $last_pid, in fish 3, and %last, in fish 2, doesn't work by default in scripts. See https://github.com/fish-shell/fish-shell/issues/5036. You can "fix" this by putting status job-control full at the top of the script or using the (jobs -lp) hack that Glenn mentioned.
Regarding the background process remaining running... I can't reproduce that. It works for me. However, note that your nvim && kill will only run the kill if nvim exits with a status of zero. If you always want the kill to be run you should just unconditionally execute it. Also, your use of signal two (SIGINT) should produce the desired result but is unusual. You should use kill -15 or just omit the signal in which case it defaults to 15 (SIGTERM).
You're getting the PID incorrectly. The $pid_mudf and $pid_sub variables are empty. You want
set pid_mupdf (jobs -lp)
I have a couple cli-based scripts that run for some time.
I'd like another script to 'restart' those other scripts.
I've checked SO for answers, but the scenarios were not applicable enough to mine, as I'm trying to end Terminal processes using Terminal.
Process:
2 cli-based scripts are running (node, python, etc).
3rd script is run and decides whether or not to restart the other 2.
This can't quit Terminal, but has to end current processes.
3rd script then runs an executable that restarts everything.
Currently none of the terminal windows are named, and from reading the other posts, I can see that it may be helpful to do so.
I can mostly set this up, I just could not find a command that would end all other terminal processes and close them.
There are a couple of ways to do this. Most common is having a pidfile.
This file contains the process ID (pid) of the job you want to kill
later on. A simple way to create the pidfile is:
$ node server &
$ echo $! > /tmp/node.pidfile
$! contains the pid of the process that was most recently backgrounded.
Then later on, you kill it like so:
$ kill `cat /tmp/node.pidfile`
You would do similar for the python script.
The other less robust way is to do a killall for each process and assume you are not running similar node or python jobs.
Refer to
What is a .pid file and what does it contain? if you're not familiar with this.
The question headline is quite general, so is my reply
killall bash
or generically
killall processName
eg. killall chrome
I've turned a program I wrote into a service, and I have a bash script that runs to start up the actual program, since there are things that have to be started in a particular order. The contents of the startup script (called with start-stop-daemon from the init.d script look like :
./rfid_reader &
sleep 2
java ReaderClass &
This works fine, but how do I go about killing them when it comes time to stop the process?
I've seen pidfiles used, do I just get the PIDs of the two programs, write them to a file, and then kill them when it comes time to shut them down, or do I have to ps -ef | grep program to get their PIDs?
I don't think killall is a good idea to do this. You'd better to record the PID of the program started in background in some file(e.g. PID_FILE) and then kill $(<$PID_FILE) to stop it.
Please refer to this thread for how to get the PID the previous started background program.
Assuming you know the name of your program, you can kill them as below :
killall -KILL program_name
On a linux box, I have at most 3 java jars files running. How do I quickly kill all 3 with one command?
Usually I would:
ps ex - get the processes running
then find the process ids then do:
kill -9 #### #### ####
Any way to shorten this process? My eyes hurts from squinting to find the process ids.
My script does the following:
nohup ./start-gossip &
nohup ./start &
nohup ./start-admin &
Is there a way to get the process ids of each without looking it up?
Short answer:
pkill java
This looks up a process (or processes) to kill by name. This will find any other java processes too, so be careful. It also accepts -9, but you should avoid using -9 unless something is really broken.
EDIT:
Based on updates, you may be able to specify the script names to pkill as well (I'm not positive). But, the more traditional way to handle this issue is to leave pid files around. After you start a new process and background it, its pid is available in $!. If you write that pid to a file, then it's easy to check if the process is still running and kill just the processes you mean to. There is some chance that the pid will be reused, however.
You can save the PIDs when you start the processes so you can use them later:
nohup ./start-gossip &
START_GOSSIP_PID=$!
nohup ./start &
START_PID=$!
nohup ./start-admin &
START_ADMIN_PID=$!
...
kill -9 $START_GOSSIP_PID
kill -9 $START_PID
kill -9 $START_ADMIN_PID
This has the advantage (over pkill) of not killing off any other processes that coincidentally have similar names. If you don't want to perform the kill operation from the script itself, but just want to have the PIDs handy, write them to a file (from the script):
echo $START_GOSSIP_PID > /some/path/start_gossip.pid
Or even just do this when you launch the process, rather than saving the PID to a variable:
nohup ./start-gossip &
echo $! > /some/path/start_gossip.pid
To get the process id of that java process run
netstat -tuplen
Process ID (PID) of that process whom you want to kill and run
kill -9 PID