I have a couple cli-based scripts that run for some time.
I'd like another script to 'restart' those other scripts.
I've checked SO for answers, but the scenarios were not applicable enough to mine, as I'm trying to end Terminal processes using Terminal.
Process:
2 cli-based scripts are running (node, python, etc).
3rd script is run and decides whether or not to restart the other 2.
This can't quit Terminal, but has to end current processes.
3rd script then runs an executable that restarts everything.
Currently none of the terminal windows are named, and from reading the other posts, I can see that it may be helpful to do so.
I can mostly set this up, I just could not find a command that would end all other terminal processes and close them.
There are a couple of ways to do this. Most common is having a pidfile.
This file contains the process ID (pid) of the job you want to kill
later on. A simple way to create the pidfile is:
$ node server &
$ echo $! > /tmp/node.pidfile
$! contains the pid of the process that was most recently backgrounded.
Then later on, you kill it like so:
$ kill `cat /tmp/node.pidfile`
You would do similar for the python script.
The other less robust way is to do a killall for each process and assume you are not running similar node or python jobs.
Refer to
What is a .pid file and what does it contain? if you're not familiar with this.
The question headline is quite general, so is my reply
killall bash
or generically
killall processName
eg. killall chrome
Related
I'm trying to achieve the following:
from a fish script, open a PDF reader as a background job. Once it is opened, spawn another fish process (that runs an infinite while loop), also as a background job.
Next, open an editor (neovim) and allow it to take control of the running terminal. Once neovim terminates, also suspend the previous 2 background jobs (mupdf and the other fish process).
My current attempt looks something along the lines of:
mupdf $pdfpath &
set pid_mupdf $last_pid
fish -c "while inotifywait ...; [logic to rebuild the pdf file..]; end" &
set pid_sub $last_pid
nvim $mdpath && kill -2 $pid_mudf $pid_sub
First I open mupdf as a background job and save its PID in a variable. Next I spawn the other fish process, also as a background job, and I save its PID as well.
Next I run nvim (but not as a background job, as I intend to actually control it), and after it is terminated by the user, I gracefully kill the previous 2 background jobs.
However this doesn't work as intended.
mupdf and the second fish process open successfully, and so does nvim, but it quickly closes after around half a second, after which I get the following in the controlling terminal window: image (bote is just the filename of the script from which the lines above originate)
The 2 background processes stay running after that and I have to kill them manually.
I understand that the script is sent a SIGHUP because the controlling terminal now executes another application (neovim), but why does neovim close after that?
I also tried disowning the background processes after they're spawned but that didn't help.
How would I solve this issue?
The problem is that $last_pid, in fish 3, and %last, in fish 2, doesn't work by default in scripts. See https://github.com/fish-shell/fish-shell/issues/5036. You can "fix" this by putting status job-control full at the top of the script or using the (jobs -lp) hack that Glenn mentioned.
Regarding the background process remaining running... I can't reproduce that. It works for me. However, note that your nvim && kill will only run the kill if nvim exits with a status of zero. If you always want the kill to be run you should just unconditionally execute it. Also, your use of signal two (SIGINT) should produce the desired result but is unusual. You should use kill -15 or just omit the signal in which case it defaults to 15 (SIGTERM).
You're getting the PID incorrectly. The $pid_mudf and $pid_sub variables are empty. You want
set pid_mupdf (jobs -lp)
A script that keeps updating the log file. data like system time and date, users currently logged in etc for every interval of time say 5 minutes. THE SCRIPT MUST RUN EVEN AFTER THE TERMINAL HAS BEEN CLOSED.
Actually, no.
First of, you don't need sh:
$ ./newscript.sh &
This is enough. This will start a background process. But your terminal is still controlling it. To achieve the behavior you want, do this:
$ disown %1
This will disown the job with the jobspec 1 (which is like an id), which was the one you started beforehand. Now you can close the terminal.
Hurrah!! I would like to answer my question since i have got the solution.
For example, I'm running a script newscript.sh I want to run this in background and continue someother job in the terminal or i can close the terminal.
[yourname # username ~]$ sh newscript.sh &
and hit enter. You will get a PID and your job will be attached to the background.
To kill the same process, use the PID
For eg.,
kill 1205212
Thank you.
I have a VM that I want running indefinitely. The server is always running but I want the script to keep running after I log out. How would I go about doing so? Creating a cron job?
In general the following steps are sufficient to convince most Unix shells that the process you're launching should not depend on the continued existence of the shell:
run the command under nohup
run the command in the background
redirect all file descriptors that normally point to the terminal to other locations
So, if you want to run command-name, you should do it like so:
nohup command-name >/dev/null 2>/dev/null </dev/null &
This tells the process that will execute command-name to send all stdout and stderr to nowhere (instead of to your terminal) and also to read stdin from nowhere (instead of from your terminal). Of course if you actually have locations to write to/read from, you can certainly use those instead -- anything except the terminal is fine:
nohup command-name >outputFile 2>errorFile <inputFile &
See also the answer in Petur's comment, which discusses this issue a fair bit.
Following problem:
3 programs:
one Java application which is started via a existing sh script
one node application
one grunt server
I want to write 2 shell scripts, the first should start all 3 programs. The second should end them. For the first script I simply call the starting commands. But for the second, which should be a standalone script(as the first should be), I have to know all process Ids for killing them. But even if I know these Ids, what if they started sub processes. I would just kill these parent processes, wouldn't I?
What's the approach here?
Thanks in advance!
Try pkill -P -KILL [parentid]. This should kill processes with the designated parent ID.
I have a master-workers architecture where the number of workers is growing on a weekly basis. I can no longer be expected to ssh or remote console into each machine to kill the worker, do a source control sync, and restart. I would like to be able to have the master place a message out on the network that tells each machine to sync and restart.
That's where I hit a roadblock. If I were using any sane platform, I could just do:
exec('ruby', __FILE__)
...and be done. However, I did the following test:
p Process.pid
sleep 1
exec('ruby', __FILE__)
...and on Windows, I get one ruby instance for each call to exec. None of them die until I hit ^C on the window in question. On every platform I tried this on, it is executing the new version of the file each time, which I have verified this by making simple edits to the test script while the test marched along.
The reason I'm printing the pid is to double-check the behavior I'm seeing. On windows, I am getting a different pid with each execution - which I would expect, considering that I am seeing a new process in the task manager for each run. The mac is behaving correctly: the pid is the same for every system call and I have verified with dtrace that each run is trigging a call to the execve syscall.
So, in short, is there a way to get a windows ruby script to restart its execution so it will be running any code - including itself - that has changed during its execution? Please note that this is not a rails application, though it does use activerecord.
After trying a number of solutions (including the one submitted by Byron Whitlock, which ultimately put me onto the path to a satisfactory end) I settled upon:
IO.popen("start cmd /C ruby.exe #{$0} #{ARGV.join(' ')}")
sleep 5
I found that if I didn't sleep at all after the popen, and just exited, the spawn would frequently (>50% of the time) fail. This is not cross-platform obviously, so in order to have the same behavior on the mac:
IO.popen("xterm -e \"ruby blah blah blah\"&")
The classic way to restart a program is to write another one that does it for you. so you spawn a process to restart.exe <args>, then die or exit; restart.exe waits until the calling script is no longer running, then starts the script again.