I refer http://jmeter.apache.org/usermanual/generating-dashboard.html#configure_general, the resulting report errors number is not correct , the value is always more than the actual situation 1 (cvs , only five false, but the display 6 errors number), I do not know bug or I did not find the configuration of the place is not Jmeter3.0 ?
It is a reported minor issue in JMeter :
https://bz.apache.org/bugzilla/show_bug.cgi?id=59621
Error count in report dashboard is one off.
It is now fixed in jmeter nightly build:
http://jmeter.apache.org/nightly.html
I was not able to generate HTML report as you showed in your screenshot, evn though I have configured as per instructions. And also in the csv file I am anot able to see the Label.
Could you please guide me,where am i missing.
**My jmeterproperties file settings:**
# legitimate values: xml, csv, db. Only xml and csv are currently supported.
jmeter.save.saveservice.output_format=csv
# true when field should be saved; false otherwise
# assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
#
# legitimate values: none, first, all
#jmeter.save.saveservice.assertion_results=none
#
jmeter.save.saveservice.data_type=true
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
jmeter.save.saveservice.response_data=false
# Save ResponseData for failed samples
jmeter.save.saveservice.response_data.on_error=false
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=true
jmeter.save.saveservice.assertions=true
jmeter.save.saveservice.latency=true
jmeter.save.saveservice.connect_time=false
#jmeter.save.saveservice.samplerData=false
jmeter.save.saveservice.responseHeaders=false
jmeter.save.saveservice.requestHeaders=false
#jmeter.save.saveservice.encoding=false
jmeter.save.saveservice.bytes=true
jmeter.save.saveservice.url=false
#jmeter.save.saveservice.filename=false
#jmeter.save.saveservice.hostname=false
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=false
#jmeter.save.saveservice.idle_time=true
# Timestamp format - this only affects CSV output files
# legitimate values: none, ms, or a format suitable for SimpleDateFormat
jmeter.save.saveservice.timestamp_format=ms
jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss.SSS
My UserProperties file settings:
Configure this property to change the report title
jmeter.reportgenerator.report_title=TimeTrax Performance Test JMeter Report Dashboard
# Change this parameter if you want to change the granularity of over time graphs.
jmeter.reportgenerator.overall_granularity=60000
# Change this parameter if you want to change the granularity of Response time distribution
# Set to 500 ms by default
jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=500
# Change this parameter if you want to keep only some samples.
# Regular Expression which Indicates which samples to keep for graphs and statistics generation.
# Empty value means no filtering
#jmeter.reportgenerator.sample_filter=
# Change this parameter if you want to override the APDEX satisfaction threshold.
#jmeter.reportgenerator.apdex_satisfied_threshold=500
jmeter.reportgenerator.apdex_satisfied_threshold=1500
# Change this parameter if you want to override the APDEX tolerance threshold.
#jmeter.reportgenerator.apdex_tolerated_threshold=1500
jmeter.reportgenerator.apdex_tolerated_threshold=3000
# Indicates which graph series are filtered (regular expression)
# In the below example we filter on Search and Order samples
# Note that the end of the pattern should always include (-success|-failure)?
# TransactionsPerSecondGraphConsumer suffixes transactions with "-success" or "-failure" depending
# on the result
#jmeter.reportgenerator.exporter.html.series_filter=(Search|Order)(-success|-failure)?
jmeter.reportgenerator.exporter.html.series_filter=(Search|Order)(-success|-failure)?
# Indicates whether only controller samples are displayed on graphs that support it.
#jmeter.reportgenerator.exporter.html.show_controllers_only=false
# Indicates whether series filter apply only on sample series or to all series
# setting this to false can lead to empty graphs if series_filter does not
# contain required series
jmeter.reportgenerator.exporter.html.filters_only_sample_series=true
Thanks,
Raj
I have given good explanation report dashboard generation in this StachExchange Question,please follow same steps to generate HTML reports for your test plan.
How do I generate a Dashboard Report in jmeter?
Related
For each sampler result I have a variable value which I want to show it in the summary report as a test result. How to write this value in the jtl file and show it in the summary report?
You can write the variable into a file using sample_variables property.
Add the next line to user.properties file:
sample_variables=foo
replace foo with your actual variable name
Restart JMeter to pick the property up
That's it, an extra column will be added to the .jtl results file holding the foo variable value for each SampleResult
With regards to displaying it in the summary report, this is not something you can do out of the box, however you can plot the variable value as a chart in the HTML Reporting Dashboard. If this is something you're interested in - add the next lines to user.properties file:
jmeter.reportgenerator.graph.custom_testGraph.classname=org.apache.jmeter.report.processor.graph.impl.CustomGraphConsumer
jmeter.reportgenerator.graph.custom_testGraph.title=Foo values
jmeter.reportgenerator.graph.custom_testGraph.property.set_Y_Axis=Foo values
jmeter.reportgenerator.graph.custom_testGraph.set_X_Axis=Over Time
jmeter.reportgenerator.graph.custom_testGraph.property.set_granularity=60000
jmeter.reportgenerator.graph.custom_testGraph.property.set_Sample_Variable_Name=foo
jmeter.reportgenerator.graph.custom_testGraph.property.set_Content_Message=Foo value :
again, replace foo with your actual JMeter Variable name
References:
Sample Variables
JMeter Properties Reference
Apache JMeter Properties Customization Guide
During my JMeter test I am extracting a float value from the response message an saving it to a variable using Regular Expression Extractor, and I am also saving that value in the generated test result csv file. Now I want to be able to generate a graph of this extracted float value, but haven't figured out a way to do so, or have found and examples to create my own graph plug in to graph this value.
In next version of JMeter 5.0, you’ll be able to do that bu adding in user.properties this:
sample_variables=VarName
jmeter.reportgenerator.graph.custom_mm_hit.classname=org.apache.jmeter.report.processor.graph.impl.CustomGraphConsumer
jmeter.reportgenerator.graph.custom_mm_hit.title=Graph Title
jmeter.reportgenerator.graph.custom_mm_hit.property.set_Y_Axis=Response Time (ms)
jmeter.reportgenerator.graph.custom_mm_hit.property.set_X_Axis=Over Time
jmeter.reportgenerator.graph.custom_mm_hit.property.set_granularity=${jmeter.reportgenerator.overall_granularity}
jmeter.reportgenerator.graph.custom_mm_hit.property.setSampleVariableName=VarName
jmeter.reportgenerator.graph.custom_mm_hit.property.setContentMessage=Message for graph point label
In above example:
VarName is the name of your variable
custom_mm_hit would be a unique id for your graph, you should change it but always prefix with "custom_"
To configure and generate graph see:
https://jmeter.apache.org/usermanual/generating-dashboard.html
You ‘ll get a new Graph of value over time in Custom Graphs section.
To download nightly build which is stable snd will be very close to 5.0, see:
https://jmeter.apache.org/nightly.html
You can use Sample Variables property to save your float value into .jtl results file
Add the next line to user.properties file:
sample_variables=foo
Replace foo with your actual JMeter Variable Reference Name from the Regular Expression Extractor
When you run your test next time you will see an extra column in the .jtl results file holding your float variable value. Another option is setting this property via -J command-line argument like
jmeter -Jsample_variables=foo -n -t test.jmx -l result.jtl
See Configuring JMeter and Apache JMeter Properties Customization Guide articles for more information on tuning your JMeter engine using properties.
Once you get the value stored you can plot the chart using LibreOffice Calc or Microsoft Excel or equivalent.
If you want to come up with a plugin to plot the custom variable you can start with How to write a plugin for JMeter guide and then look into source of i.e. Latencies Over Time plugin which lives in GitHub
I have this Analysis that I wish to invoke from URL (which I can).
This analysis in particular is mounted on a dashboard and 6 of the 17 columns can be filtered from a prompt mounted on the same dashboard.
I only need the analysis and still be able to filter the results. I read about parameters that can be given to the URL, but I can't seem to make the filters work. I am using the &P0=n parameter and the consequent &P1=xx parameter.
Without the &P I am able to see the table, when I add parameters I get this error UH6MBRBC:E6MUPJPH.
Thanks for your time, have a nice day.
Got it to work by myself afterall (always best).
Basically instead of &p0 and such I used &coln and &valn (where n is the column number):
&coln - is the name of the field
&valn - is the value for which you filter
More information and better explanation can be found here.
In "Create Test case" option, I want to give test case name length more than 100 characters. But it takes only 100 characters and trims the rest of the name. I want to change that limit to 200 characters.
Kindly guide me as in which file in TestLink-1.9.7 I need to make changes and where?
That's easy!
Please read the guidelines from:
http://www.embeddedsystemtesting.com/2011/11/how-to-change-test-case-title-in-test.html
In general what you need to do is modification of DB design for one field and modification of one file:
In Database: change designed value of Name field in nodes_hierarchy table to 255 (default is 100)
Modify /gui/templates/input_dimensions.conf such way
Search and increase
SRS_TITLE_MAXLEN=255 /default is 100
REQ_SPEC_TITLE_MAXLEN=255/default is 100
TESTCASE_NAME_MAXLEN=255 /default is 100
In case you need to increase the limits for other items, you can do the changes described in step 2 above for other parameters as well, like: TESTPLAN_NAME_MAXLEN, CONTAINER_NAME_MAXLEN etc
For use case of creating test cases using import you need also to modify the following file: /cfg/const.inc.php
$g_field_size->node_name = 255
$g_field_size->testcase_name = 255
etc (depending on which items' limits you want to increase - names of test cases, test suites, requirements and so on)
Currently, I am working with Omnet++ (Network Simulator), i know how to turn-off Scalars & Vectors recording, but how to do the same for Histogram (Turning-off Histogram recording) ?
I tried to turn-off the related scalars of the Histogram, but it was unsuccessful.
#### Histogram name ####
"Delays for 1st Copy"
#### In order to turn of scalars recording we use this command ####
**.scalar-name.scalar-recording = true
#### So i tried this but it doesnt work ####
**.Delays for 1st Copy.scalar-recording = true
Thanks,
One option is to remove the histogram statistic recording mode from your statistic declaration in the NED file.
#statistic[foo](record=count,mean,histogram); # remove histogram from here
Another option is to enable/disable statistic recording modes from the omnetpp.ini
Here are some of the basic recording modes in OMNeT++
**.result-recording-modes = default # records count, mean
**.result-recording-modes = all # records count, mean, max
**.result-recording-modes = - # records none
**.result-recording-modes = mean # records only mean (disables 'default')
You can have mode advanced combinations by adding or removing modes from the basic modes:
**.result-recording-modes = default,-vector,+histogram # records count,mean,histogram
**.result-recording-modes = all,-vector,+histogram # --> count,mean,max,histogram
You probably need something like:
**.result-recording-modes = default,-histogram
To modify the modes of specific modules provide the full path between ** and result-recording-modes
**.fifo[*].queueLength.result-recording-modes = +vector # default modes plus vector
Further details can be found at the OMNeT++ manual: https://omnetpp.org/doc/omnetpp/manual/usman.html#sec405