I have this Analysis that I wish to invoke from URL (which I can).
This analysis in particular is mounted on a dashboard and 6 of the 17 columns can be filtered from a prompt mounted on the same dashboard.
I only need the analysis and still be able to filter the results. I read about parameters that can be given to the URL, but I can't seem to make the filters work. I am using the &P0=n parameter and the consequent &P1=xx parameter.
Without the &P I am able to see the table, when I add parameters I get this error UH6MBRBC:E6MUPJPH.
Thanks for your time, have a nice day.
Got it to work by myself afterall (always best).
Basically instead of &p0 and such I used &coln and &valn (where n is the column number):
&coln - is the name of the field
&valn - is the value for which you filter
More information and better explanation can be found here.
Related
I have a question concerning the use of presentation variables:
1) What's the correct syntax for filtering on a presentation variable is used? You allow a user to select multiple values in a filter eg. A and B. If you use the syntax = '#{PV}{%}' it will result in this sql: = 'A, B' which of course won't exist in the data. I'd like to have this result: in ('A', 'B').
I've already found this syntax: (#{PV}['#']) which gives the correct sql, only thing here is that this doesn't work when you have a dashboard prompt where you allow 'all column values'. When no value is passed to this presentation variable, the analysis throws an error. I have no idea how to put a default value in this one. Any ideas on this?
2) Is there any configuration or setting where you can push obi to use a presentation variable in stead of using the 'normal' way of filtering as shown here:
The obi way is that it changes the relation to the relation in the prompt (if the prompt says 'is greater than' it will change here as well, even though you've put here 'is equal to'), but it will also use a value for this dimension if there's ever been a value for this, rather than listening to the value in the presentation variable of the dashboard prompt. I know that you can translate this to SQL but that's not the way to go for me. The behaviour I'd like is (in this exact order):
- when there is a value in the presentation variable in the dashboard prompt, take this.
- when there is a value for this role of the dimension, take that.
The reason why is because we have this dimension 'Afdeling' which can take up many roles but our customer asked for the roles to be hidden from the end user. This means that even though you switch roles, the end user always sees 'Afdeling' and couldn't care less in which role it is looking at its 'Afdeling'. They can switch between different dashboard pages and if I'd put on top of the page the dashboardprompt of the 'Afdeling' in the role it needed to be, the value won't pass through when switching pages to another dashboardprompt of another role. That way the end user would know something was up. So the value needs to pass through the prompt on each page, no matter what the role of that dimension.
After a bit of googling I've found the answer to question 1 myself. Thanks to this website https://www.obieetips.com/2014/05/obiee-11g-using-multiple-value-for.html I now know that the correct syntax is (#{pv_region}['#']{'West '})
I had a scenario like I need to select one random date range from drop down list of values(like today, yesterday, last month etc). How should i select one value randomly every time from the drop down list.waht function or method i need use in my jmeter script.Any one please help me. Thanks in advance
The easiest way to get this done is using HTML Link Parser, refer Poll Example user manual entry for more details, basically you need to provide input name and a wildcard like .* and JMeter will automatically scan the possible options and pick up a random value.
Other option (if the above one is not applicable for some reason) is using XPath Extractor or CSS/JQuery Extractor to get the possible dropdown values from the page DOM, Match No. parameter set to 0 will return the random option value.
How can I get the value of important id and ValueType?
I have tried using web_save_param_regexp (but unfortunately I don't fully understand how the function works).
I have also tried using web_save_param (with the help of offset and length).
unfortunately once again I cannot get the accurate value some values change in length specially when the total amount values dynamically changes per run.
<important id=\"insertsomevalueshere\" record=\"1\" nucTotal=\"NUC609.40\"><total amount=\"68.75\" currency=\"USD\"/><total amount=\"609.40\" currency=\"USD\"/><out avgsomecost=\"540.65\" ValueType=\"insertsomevalueshere\" containsawesomeness=\"1\" Score=\"-97961\" somedatatype=\"1\" typeofData=\"VAL\" web=\"1\">
Put these lines of code before the line of code which does your web request:
web_reg_save_param_regexp("ParamName=importantid","Regexp=<important id=\\\"(.*?)\\\"",LAST);
web_reg_save_param_regexp("ParamName=ValueType","Regexp= ValueType=\\\"(.*?)\\\"",LAST);
You will then have two stored parameters 'importantid' and 'ValueType'
Dynamic number of elements to correlate? Your path for resubmission is through web_custom_request(). You will need to build the string you need dynamically with the name:value pairs for all of the data which needs to be included.
This path will place a premium on your string manipulation skills in the language of the tool. The default path is through C, but you have other language options if your skills are more refined in another language.
Writing script in LR for Siebel Open UI. All my requests contains this parameter, with different values. What does it mean?
Examples (from different requests):
"Name=SWEIPS", Value = #0'0'1'0'GetProfileAttr'3'attrName'SBRF Position Id'"
"Name=SWEIPS", Value = #0'0''0'3'1-SQE21A, 1-SQL21E, 1SQE31"
And so on.
Can I simple delete it?
Can I simply delete it? - No, you’re not supposed to delete it.
Compare SWEIPS value by recording twice or trice with different data sets, check is there any date/time values in SWEIPS. If there is nothing to correlate leave as it is, no need to delete.
Ensure to correlate values like SWET,ROWID,SWECount,SWEC and so on.
Been looking all over the place for a solution to this issue. I have a Yahoo Pipe (http://pipes.yahoo.com/pipes/pipe.info?_id=e5420863cfa494ee40e4c9be43f0e812) that I've created to pull back image content from the Bing Search API. The URL builder includes a $skip attribute that takes an integer and uses it to select the starting (index) point for the result set that the query returns.
My initial plan had been to use the math engine in the Wolfram Alpha API to generate a random number (randomInteger[1000]) that I could use to seed the $skip value each time that the pipe is run. I have an earlier version of the pipe where I was able to get the query / result steps working using either "XPath Fetch" and "Fetch Data". However, regardless of how I Fetch the result, the response returns as an attribute / value pair in a list item.Even when I use "Emit items as string" in XPath Fetch, I still get a list with a single item, when what I really want is the integer that I can plug into my $skip attribute.
I've tried everything in Pipes I can think of, and spent a lot of time online looking for an answer. Is there anyway to extract text (in this case, a number) from a single list item and then use the output as input to "wire" a text parameter in another Pipes block? Any suggestions / ideas welcome. In the meantime, I'm generating a sorta-random number by manipulating a timecode hash, but it just feels tacky :-)
Thanks!
All the sources are for repeated items. You can't have a source that just makes a single number.
I'm not really clear what you're trying to do. You want to put a random number into part of the URL string that gets an RSS feed?