This question already has answers here:
Why should there be spaces around '[' and ']' in Bash?
(5 answers)
Closed 6 years ago.
read A
if [["$A" == 'Y' -o "$A" =='y']]
then echo "YES"
else echo "NO"
fi
I am very new to shell scripting.basically, i am trying to check if the input is Y or y.
I am getting the following error which I am not able to debug.
solution.sh: line 2: [[Y: command not found
Thanks.
You are missing space after [[
The if should be like
if [[ "$A" == 'Y' || "$A" == 'y' ]]
The [[ ]] is an extended test command, like any command it should be separated from others by spaces
Add proper space inside the square brackets and after the ==:
read A
if [ "$A" == 'Y' -o "$A" == 'y' ]; then
echo "YES";
else
echo "NO";
fi
Note that to use -o you ought to use test command, which uses single brackets.
If you use [[ ]], with double brackets, you must use || instead of -o:
read A
if [[ "$A" == 'Y' || "$A" == 'y' ]]; then
echo "YES";
else
echo "NO";
fi
Related
How do I compare a variable to a string (and do something if they match)?
Using variables in if statements
if [ "$x" = "valid" ]; then
echo "x has the value 'valid'"
fi
If you want to do something when they don't match, replace = with !=. You can read more about string operations and arithmetic operations in their respective documentation.
Why do we use quotes around $x?
You want the quotes around $x, because if it is empty, your Bash script encounters a syntax error as seen below:
if [ = "valid" ]; then
Non-standard use of == operator
Note that Bash allows == to be used for equality with [, but this is not standard.
Use either the first case wherein the quotes around $x are optional:
if [[ "$x" == "valid" ]]; then
or use the second case:
if [ "$x" = "valid" ]; then
Or, if you don't need an else clause:
[ "$x" == "valid" ] && echo "x has the value 'valid'"
a="abc"
b="def"
# Equality Comparison
if [ "$a" == "$b" ]; then
echo "Strings match"
else
echo "Strings don't match"
fi
# Lexicographic (greater than, less than) comparison.
if [ "$a" \< "$b" ]; then
echo "$a is lexicographically smaller then $b"
elif [ "$a" \> "$b" ]; then
echo "$b is lexicographically smaller than $a"
else
echo "Strings are equal"
fi
Notes:
Spaces between if and [ and ] are important
> and < are redirection operators so escape it with \> and \< respectively for strings.
To compare strings with wildcards, use:
if [[ "$stringA" == *"$stringB"* ]]; then
# Do something here
else
# Do something here
fi
I have to disagree one of the comments in one point:
[ "$x" == "valid" ] && echo "valid" || echo "invalid"
No, that is not a crazy oneliner
It's just it looks like one to, hmm, the uninitiated...
It uses common patterns as a language, in a way;
And after you learned the language.
Actually, it's nice to read
It is a simple logical expression, with one special part: lazy evaluation of the logic operators.
[ "$x" == "valid" ] && echo "valid" || echo "invalid"
Each part is a logical expression; the first may be true or false, the other two are always true.
(
[ "$x" == "valid" ]
&&
echo "valid"
)
||
echo "invalid"
Now, when it is evaluated, the first is checked. If it is false, than the second operand of the logic and && after it is not relevant. The first is not true, so it can not be the first and the second be true, anyway.
Now, in this case is the the first side of the logic or || false, but it could be true if the other side - the third part - is true.
So the third part will be evaluated - mainly writing the message as a side effect. (It has the result 0 for true, which we do not use here)
The other cases are similar, but simpler - and - I promise! are - can be - easy to read!
(I don't have one, but I think being a UNIX veteran with grey beard helps a lot with this.)
The following script reads from a file named "testonthis" line by line and then compares each line with a simple string, a string with special characters and a regular expression. If it doesn't match, then the script will print the line, otherwise not.
Space in Bash is so much important. So the following will work:
[ "$LINE" != "table_name" ]
But the following won't:
["$LINE" != "table_name"]
So please use as is:
cat testonthis | while read LINE
do
if [ "$LINE" != "table_name" ] && [ "$LINE" != "--------------------------------" ] && [[ "$LINE" =~ [^[:space:]] ]] && [[ "$LINE" != SQL* ]]; then
echo $LINE
fi
done
You can also use use case/esac:
case "$string" in
"$pattern" ) echo "found";;
esac
Bash 4+ examples. Note: not using quotes will cause issues when words contain spaces, etc. Always quote in Bash, IMO.
Here are some examples in Bash 4+:
Example 1, check for 'yes' in string (case insensitive):
if [[ "${str,,}" == *"yes"* ]] ;then
Example 2, check for 'yes' in string (case insensitive):
if [[ "$(echo "$str" | tr '[:upper:]' '[:lower:]')" == *"yes"* ]] ;then
Example 3, check for 'yes' in string (case sensitive):
if [[ "${str}" == *"yes"* ]] ;then
Example 4, check for 'yes' in string (case sensitive):
if [[ "${str}" =~ "yes" ]] ;then
Example 5, exact match (case sensitive):
if [[ "${str}" == "yes" ]] ;then
Example 6, exact match (case insensitive):
if [[ "${str,,}" == "yes" ]] ;then
Example 7, exact match:
if [ "$a" = "$b" ] ;then
Enjoy.
I would probably use regexp matches if the input has only a few valid entries. E.g. only the "start" and "stop" are valid actions.
if [[ "${ACTION,,}" =~ ^(start|stop)$ ]]; then
echo "valid action"
fi
Note that I lowercase the variable $ACTION by using the double comma's. Also note that this won't work on too aged bash versions out there.
I did it in this way that is compatible with Bash and Dash (sh):
testOutput="my test"
pattern="my"
case $testOutput in (*"$pattern"*)
echo "if there is a match"
exit 1
;;
(*)
! echo there is no coincidence!
;;esac
I was struggling with the same situation for a while, here is how I could resolve:
if [ "$var1" == "$var2" ]; then
#dowhateveryouwant
fi
Be careful with the spaces left before and after the comparison sign, otherwise it won't work or it'll give you an unexpected result.
I've spent so much time on using a single equal(=) sign but didn't work. I Hope it can help.
Are you having comparison problems? (like below?)
var="true"
if [[ $var == "true" ]]; then
# It should be working, but it is not...
else
# It is falling here...
fi
Try like the =~ operator (regular expression operator) and it might work:
var="true"
if [[ $var =~ "true" ]];then
# Now it works here!!
else
# No more inequality
fi
Bash regex operator =~ (official reference)
StackOverflow further examples (here)
This question already has answers here:
Ternary operator (?:) in Bash
(23 answers)
Bash command groups: Why do curly braces require a semicolon?
(1 answer)
Closed 2 years ago.
Can a conditional statement be inserted in, for example, a print command like echo with bash?
E.g. (does not work)
$ cat t.sh
#!/bin/bash
string1="It's a "
string2opt1="beautiful"
string2opt2="gross"
string3=" day."
read c
echo -n "$string1 $( [[ $c -eq 0 ]] && { echo -n "$string2opt1" } || { echo "$string2opt2" } ) $string3"
I know that this is possible with semicolons/non-one-liners; I am just wondering if there is a more elegant or accepted way of doing this.
To clarify, you want to achieve this:
#!/bin/bash
string1="It's a"
string2opt1="beautiful"
string2opt2="gross"
string3="day."
read -r c
if [[ $c -eq 0 ]]; then
echo "$string1" "$string2opt1" "$string3"
else
echo "$string1" "$string2opt2" "$string3"
fi
but in a one-liner. Does this work for you?
#!/bin/bash
string1="It's a"
string2opt1="beautiful"
string2opt2="gross"
string3="day."
read -r c
echo "$string1" "$([[ $c -eq 0 ]] && echo "$string2opt1" || echo "$string2opt2")" "$string3"
How do I compare a variable to a string (and do something if they match)?
Using variables in if statements
if [ "$x" = "valid" ]; then
echo "x has the value 'valid'"
fi
If you want to do something when they don't match, replace = with !=. You can read more about string operations and arithmetic operations in their respective documentation.
Why do we use quotes around $x?
You want the quotes around $x, because if it is empty, your Bash script encounters a syntax error as seen below:
if [ = "valid" ]; then
Non-standard use of == operator
Note that Bash allows == to be used for equality with [, but this is not standard.
Use either the first case wherein the quotes around $x are optional:
if [[ "$x" == "valid" ]]; then
or use the second case:
if [ "$x" = "valid" ]; then
Or, if you don't need an else clause:
[ "$x" == "valid" ] && echo "x has the value 'valid'"
a="abc"
b="def"
# Equality Comparison
if [ "$a" == "$b" ]; then
echo "Strings match"
else
echo "Strings don't match"
fi
# Lexicographic (greater than, less than) comparison.
if [ "$a" \< "$b" ]; then
echo "$a is lexicographically smaller then $b"
elif [ "$a" \> "$b" ]; then
echo "$b is lexicographically smaller than $a"
else
echo "Strings are equal"
fi
Notes:
Spaces between if and [ and ] are important
> and < are redirection operators so escape it with \> and \< respectively for strings.
To compare strings with wildcards, use:
if [[ "$stringA" == *"$stringB"* ]]; then
# Do something here
else
# Do something here
fi
I have to disagree one of the comments in one point:
[ "$x" == "valid" ] && echo "valid" || echo "invalid"
No, that is not a crazy oneliner
It's just it looks like one to, hmm, the uninitiated...
It uses common patterns as a language, in a way;
And after you learned the language.
Actually, it's nice to read
It is a simple logical expression, with one special part: lazy evaluation of the logic operators.
[ "$x" == "valid" ] && echo "valid" || echo "invalid"
Each part is a logical expression; the first may be true or false, the other two are always true.
(
[ "$x" == "valid" ]
&&
echo "valid"
)
||
echo "invalid"
Now, when it is evaluated, the first is checked. If it is false, than the second operand of the logic and && after it is not relevant. The first is not true, so it can not be the first and the second be true, anyway.
Now, in this case is the the first side of the logic or || false, but it could be true if the other side - the third part - is true.
So the third part will be evaluated - mainly writing the message as a side effect. (It has the result 0 for true, which we do not use here)
The other cases are similar, but simpler - and - I promise! are - can be - easy to read!
(I don't have one, but I think being a UNIX veteran with grey beard helps a lot with this.)
The following script reads from a file named "testonthis" line by line and then compares each line with a simple string, a string with special characters and a regular expression. If it doesn't match, then the script will print the line, otherwise not.
Space in Bash is so much important. So the following will work:
[ "$LINE" != "table_name" ]
But the following won't:
["$LINE" != "table_name"]
So please use as is:
cat testonthis | while read LINE
do
if [ "$LINE" != "table_name" ] && [ "$LINE" != "--------------------------------" ] && [[ "$LINE" =~ [^[:space:]] ]] && [[ "$LINE" != SQL* ]]; then
echo $LINE
fi
done
You can also use use case/esac:
case "$string" in
"$pattern" ) echo "found";;
esac
Bash 4+ examples. Note: not using quotes will cause issues when words contain spaces, etc. Always quote in Bash, IMO.
Here are some examples in Bash 4+:
Example 1, check for 'yes' in string (case insensitive):
if [[ "${str,,}" == *"yes"* ]] ;then
Example 2, check for 'yes' in string (case insensitive):
if [[ "$(echo "$str" | tr '[:upper:]' '[:lower:]')" == *"yes"* ]] ;then
Example 3, check for 'yes' in string (case sensitive):
if [[ "${str}" == *"yes"* ]] ;then
Example 4, check for 'yes' in string (case sensitive):
if [[ "${str}" =~ "yes" ]] ;then
Example 5, exact match (case sensitive):
if [[ "${str}" == "yes" ]] ;then
Example 6, exact match (case insensitive):
if [[ "${str,,}" == "yes" ]] ;then
Example 7, exact match:
if [ "$a" = "$b" ] ;then
Enjoy.
I would probably use regexp matches if the input has only a few valid entries. E.g. only the "start" and "stop" are valid actions.
if [[ "${ACTION,,}" =~ ^(start|stop)$ ]]; then
echo "valid action"
fi
Note that I lowercase the variable $ACTION by using the double comma's. Also note that this won't work on too aged bash versions out there.
I did it in this way that is compatible with Bash and Dash (sh):
testOutput="my test"
pattern="my"
case $testOutput in (*"$pattern"*)
echo "if there is a match"
exit 1
;;
(*)
! echo there is no coincidence!
;;esac
I was struggling with the same situation for a while, here is how I could resolve:
if [ "$var1" == "$var2" ]; then
#dowhateveryouwant
fi
Be careful with the spaces left before and after the comparison sign, otherwise it won't work or it'll give you an unexpected result.
I've spent so much time on using a single equal(=) sign but didn't work. I Hope it can help.
Are you having comparison problems? (like below?)
var="true"
if [[ $var == "true" ]]; then
# It should be working, but it is not...
else
# It is falling here...
fi
Try like the =~ operator (regular expression operator) and it might work:
var="true"
if [[ $var =~ "true" ]];then
# Now it works here!!
else
# No more inequality
fi
Bash regex operator =~ (official reference)
StackOverflow further examples (here)
This question already has answers here:
Why should there be spaces around '[' and ']' in Bash?
(5 answers)
Closed 4 years ago.
I am trying to run simple code block.
It gives error on fourth line as "syntax error near `$1'"
=~ means Matches Regular Expression
How should I use '$1' variable with this operator?
Here is my code:
if [[ $1 -gt 3 ]] && [[ $1 -lt 7 ]]
then
echo "$1 is between 3 and 7"
elif [[ $1 =~ "Jeff"]] || [[ $1 =~ "Roger" ]] || [[ $1 =~ "Brian" ]]
then
echo "$1 works in the Data Science Lab"
else
echo "You entered: $1, not what I was looking for.."
fi
Very funny indeed. You've typed the first condition in that line as [[ $1 =~ "Jeff"]], so without a space between "Jeff" and ]] bash interprets them as a single string, which is obviously not your pattern, and the whole parse fails and line structure crashes. If you add that space:
if [[ $1 =~ "Jeff" ]] || [[ $1 =~ "Roger" ]] || [[ $1 =~ "Brian" ]]
then it works... seemingly...
I am trying to compare some characters in BASH
read a
if (($a == "Y"))
then
echo "YES"
elif (($a == "y"))
then
echo "YES"
else
echo "NO"
fi
but for some reason it does not work as expected. It always output YES. Looking at this super simple script, I can not understand what is wrong.
It's due to spacing and the brackets.
read a
if [[ $a == "Y" ]]
then
echo "YES"
elif [[ $a == "y" ]]
then
echo "YES"
else
echo "NO"
fi
You should review bash comparison. You're trying to use an arithmetic expansion construct to do string comparison. Instead, you should use the [ exp ] or [[ exp ]] constructs.
((expression)) is used for 'arithmetic evaluation' and strings inside (( )) will be treated as variable names, thus
if (($a == "Y"))
is equivalent to
if [ $a == $Y ]
(if $Y is a string, then bash will try to expand the name until it finds a numeric value or undefined variable)
You need to use [ ] or [[ ]] to compare strings as #KRUKUSA said.