I'm trying to configure an OS X box with Samba using SMBUp. I installed SMBUp, installed SAMBA through it, and configured my users and shares. The only issue is when I check which protocol version I'm using, I'm using SMB1
Ok, fine. But when I try and change the protocol version in SMBUp, there is only LANMAN/CORE/NT protocols as options. I tried manually editing the configuration file in /opt/local/etc/samba3/smb.conf and changing the minimum protocol to SMB3, but that didn't work at all.
When I used OS X's built-in file sharing, I could connect via SMB3, but I only got around 10MB/s over ethernet... Not very good at all.
I'm very new to this whole thing and I couldn't find much documentation pertaining to my issue.
Any suggestions?
Thanks
EDIT:
I tried using (rebooting after running it):
sudo sh -c "echo '[default]' >> /etc/nsmb.conf; echo 'smb_neg=smb3_only' >> /etc/nsmb.conf"
But that just prevented my share from mounting.
The version of Samba included in SMBUp is lower 3.6.something. SMB2 and SMB3 support was added in 4.0. Now I just have to figure out how to update Samba...
Cheers
EDIT:
Right, Samba devs stopped supporting OS X and I keep getting an error about not having GnuTls installed even though it is installed. So I can't compile it.
Great. I'm going to go die in a hole now.
Related
I have two CentOS VMs which use Jenkins to run automated tests through firefox. Both have firefox installed. Both versions of firefox are the same (firefox-56.0.1). I do not know if they are both x86_64 or some other type, but whichever they are, they are the same. (I am using the same .tar.bz2 file. I copied it from one instance to the other.)
In one instance, I am able to run firefox. "firefox --headless" returns "*** You are running in headless mode."
After copying the .tar.bz2 file to the other instance and installing firefox, I find that the new instance does not have the same performance. "firefox --headless" returns the following:
XPCOMGlueLoad error for file /usr/local/firefox/libmozgtk.so:
libgtk-3.so.0: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
What might explain this difference? It appears that I did something right in the first instance, but I cannot tell what. Is there some setting that will prevent firefox from trying to use the "libgtk-3.so.0" file? This file does not exist on either instance.
I've seen this question elsewhere, but the answer seems to focus on versions (I know my version has worked in the first instance) and a particular bug that has been backlogged (this bug only bothers me for the new instance).
Problem solved minutes after asking the question.
Simply run:
yum info gtk3
Check if gtk3 is installed. If not:
yum install gtk3
My old instance had gtk3 version 3.22.10 installed. My new instance had the same available but not installed. I don't recall seeing this in any of the guides to running firefox headlessly, but a search result that I did not originally think worth checking was able to resolve this rather quickly. Credit to the folks at https://forums.fedoraforum.org/showthread.php?310652-Udating-Firefox-fedora-19
For Ubuntu or Debian distros use:
apt-get install packagekit-gtk3-module
You probably installed the wrong firefox version for 32bit on a 64bit system.
try downloading firefox with this portable installer download-mozilla-portable.sh which should work on a 64bit linux (tested in Ubuntu 19.10)
I am trying to build Firefox OS 2.2 on Ubuntu 14.04, but I keep running into an error that reads:
configure: error: Only GCC 4.6 or newer supported
*** Fix above errors and then restart with\
"make -f client.mk build"
> Build failed! <
This would normally lead me to suspect I might need GCC 4.6, but I am already using that. I have successfully built 2.0 and 2.1 on this machine in the past, and 1.1-1.4 previously on one of the '13 versions of Ubuntu before that, and I have had export CC=gcc-4.6 and export CXX=g++-4.6 in .profile practically since I installed 14.04 on this machine.
To see if I could spot anything obvious in the output I tee'd it to a file, and it is taking a good 7000 lines of output to reach the point where suddenly it thinks I am using a different gcc. If I change CC and CXX to not specify the version then it complains a lot sooner, so I take that to suggest that it is finding the right version for quite a while before complaining about this?
In any case, I am not finding anything else quite like this, and my experience with building mobile OSes is admittedly limited (only Firefox OS builds) but up until now the instructions have either worked or produced errors I could find someone else posting about already. Hopefully someone else happens to know something about why gcc-4.6 would give an error about needing version 4.6?
Edit
Turns out, there is a Bugzilla Bug Report (1121600) that mentions this. If I get the general sense of what it says, I think there is some kind of configuration thing wrong that is known to be true for some of the models that one can compile Firefox OS for?
I thought I would go ahead and put something about that here, since I ran into that. I wish I had a better sense of what the issue was so I could just fix it for my one device, but in case that is helpful to someone else searching for this who has not come up with the terms that led me there yet, that is apparently what is going on.
https://bugzilla.mozilla.org/show_bug.cgi?id=1121600
try replace:
<project name="platform_build" path="build" remote="gp-b2g" revision="501521623cc9a3117799a040e868bddf26b6cbde">
with:
<project name="platform_build" path="build" remote="gp-b2g" revision="3ce5007ab3562021551a35e2c06d323d1e8ee048">
and comment in config.sh (or will override your change)
repo_sync() {
rm -rf .repo/manifest* &&
to:
repo_sync() {
#rm -rf .repo/manifest* &&
finally execute the config script again
BRANCH=v2.2 ./config.sh <YOUR DEVICE>
I want to build a Darwin Streaming Server on my mac for iOS development test. But after taking the following steps which I searched from google, it fails all the time.
Method 1:
Download from http://dss.macosforge.org/ ->Mac OS X Install -> Streaming Server;
Install the dmg;
It tries to open http://127.0.0.1:1220/ but fails with "This webpage is not available ERR_CONNECTION_REFUSED".
Method 2:
Download the source code of 6.0.3 version;
$ tar xvf DarwinStreamingSrvr6.0.3-Source.tar
$ cd DarwinStreamingSrvr6.0.3-Source
$ wget http://www.abrahamsson.com/dss-6.0.3.patch
$ patch -p0 < dss-6.0.3.patch
$ ./Buildit
Then, it fails with the following words.
Darwin Streaming Server
I don't know your platform. I'll assume this is a Linux x86 platform.
Please edit the BuildServer script & PlatformHeader.h to add your platform.
Building for Darwin.x86_64 with gcc
xcodebuild DarwinStreamingServer
=== BUILD LIBRARY TARGET AtomicLib (Library) OF PROJECT StreamingServer WITH CONFIGURATION Development ===
Check dependencies
Jam is deprecated and has been removed; targets that use Jam must be upgraded to native targets. For more information on doing this, consult the Xcode documentation.
** BUILD FAILED **
The following build commands failed:
Check dependencies
(1 failure)"
I tried to run ./Install, it showed me
Unable to perform install
You must be logged in as root to install Darwin Streaming Server
and I don't know what to do now.
PS: I've installed Xcode on my mac and didn't find any available document about Darwin Streaming Server, or I missed it?
Hope for any help. Thanks.
Calios and Jessica, thank you for your answers. I'm running using OS Windows 7 and installing DSS 5.5.5 for windows, and I also meet the condition same as with you.
However, after I followed your instructions, it's not close enough with our needs, because the button will lose meaning in presentation.
So I started digging more information from another articles, and I found interesting perception from a developer at this article. He said the following:
Maybe this has something to do with the perl script which generates the web sites?*
So starting from Jens's perception, I tried to downgrade my Perl Script from version 5.26 to 5.8. This resolved my problem, the interface displays correctly as in the DSS Tutorial.
Right now I'm still working on testing the DSS function
I hope this solution will help others.
Well, finally I solved this issue with the help of my friend.
Here's the steps of solution.
I've given up compiling and building on my own and downloaded the dmg file.(version 6.0.3)
Install the dmg as directions.
Then, go to /usr/sbin in terminal and find streamingadminserver.pl and QuickTimeStreamingServer.
Run them.
Check if they're running with ps aux|grep streaming.
Open http://localhost:1220/parse_xml.cgi in Safari or Chrome. It will show some textfield and a button.
However, there's no words at all ! Go to /Library/QuickTimeStreaming/AdminHtml and edit setup_assistant2.html.
Find line 333 and change it from return "$message{$name}"; to return $name;.
Then it shows some understandable words, though not exact words.
Till now, it can be partly work. However, in some steps I mentioned above, for example, html editing step, I really don't know why the words just don't show and just have a try.
Save the exact steps I did here for memory. It will be wonderful if it can help anyone or anyone have some good idea about it.
Thanks.
#SouravGupta, I am a newbie for stackoverflow, so I could not add comment to reply your question.
I just installed DDS 6.0.3 on Mac OS X El Capitan. I hit the same problem you had. I found that ** return "$message{$name}"; ** is no longer in setup_assistant2.html. It is in parse_xml.cgi (/Library/QuickTimeStreaming/AdminHtml). Just search for "sub foundString". There were two return places there. You need to change both in order to make it work.
It seems that DDS web admin software has localization function. Html files only contain string keywords. It suppose to use that "foundString" function to get translated string from keywords. However, for some reason, it returns empty string here even if there is a "messages" file inside html_en folder. I could not spend more time to figure out why right now.
QTSS/DSS Web Admin 6.0.3 requires Perl version 5.16 and earlier. OS X 10.11 El Capitan installs both Perl versions 5.16 and 5.18, but it defaults to using Perl version 5.18.
In order to run QTSS/DSS Web Admin in OS X 10.11 El Capitan, you need to examine each of the Perl script (.pl) within the AdminHtml folder and change the line #!/usr/bin/perl to #!/usr/bin/perl5.16.
I've got sort of a simple problem, but I can't seem to find any conclusive answers on the web. So, I have Ubuntu Server running in VirtualBox with Ruby and Rails installed.
What I want to do, is edit the files in the VM over SSH using RubyMine 5.0 on the Windows host machine (just like I can in Eclipse).
The problem is I can't find how to do that. I'm pretty sure it can be done, because I've found some related articles on the web, but none of them show me how I can configure RubyMine to do that.
I've searched every option in the menu and I can't figure it out by myself, so a "to the point" explanation would really be of help.
Thanks
There is no way to do this natively in RubyMine. My solution is to mount the remote filesystem to a local folder using sshfs.
Linux you can get sshfs through your package manager.
OSX you can get it here make sure to install both OSX fuse and SSHFS. The version on HomeBrew did not work for me on OSX 10.9.4 so I recommend using the packages from the link.
Windows you can use win-sshfs, I've had good results using Chocolaty to install win-sshfs
To use on Linux/OSX:
Open your terminal.
mkdir MountFolder
sshfs user#server.com:/path/to/project MountFolder/
To use on Windows:
Use the GUI.
After you've mounted the remote file system open RubyMine and select Open Directory and browse to the project.
This is the best solution I can come up with until JetBrains supports it natively.
I had been running Fedora 9 for the last year --- I have a Windows box (actually a VM) that mounts a folder on the Fedora box using my own name/password. I do this so that I can run my version control program (Vault) on Windows. It has worked flawlessly for the last 6 months.
Yesterday, I upgraded Fedora from version 9 to version 11. Since doing so, I am no longer able to change file permissions from my Windows box. Nothing has changed, there's no firewall on the machine, SELinux is disabled (SELINUX=disabled in /etc/sysconfig/selinux), etc
I can still read the files. Any idea what has happened and how I might fix this?
Thanks,
David
P.S. The error I get is
An error occurred applying attributes to the file:
....my filename...
Access is denied.
P.P.S. I AM able to create a NEW file in the mounted folder. After doing so, I can change its properties to make it be read-only. BUT I then can NOT change its properties again to be writable. Hope this helps.
Turns out this would appear to be a bug in the latest version of Samba that you get when you install Fedora 11.
I manually built SAMBA 3.4.1 from source, installed it and my Windows machines work just fine with it.
(Just in case anyone else searches this site)