How can I add channels to my PULL and PUSH replications with Xamarin PLC (C#)? And to the documents?
I tried to write something and set channels, but still not working.
The documents created after that instruction hadn't got any channels.
Here my code:
{
if (Manager.SharedInstance.GetDatabase(DatabaseName) == null)
return;
IAuthenticator auth =
string.IsNullOrWhiteSpace(Username)
? null
: AuthenticatorFactory.CreateBasicAuthenticator(Username, Password);
pull = Manager.SharedInstance.GetDatabase(DatabaseName).CreatePullReplication(RemoteSyncUrl);
if(auth != null)
{
pull.Authenticator = auth;
}
push = Manager.SharedInstance.GetDatabase(DatabaseName).CreatePushReplication(RemoteSyncUrl);
if(auth != null)
{
push.Authenticator = auth;
}
pull.Continuous = true;
push.Continuous = true;
pull.Changed += ReplicationProgress;
push.Changed += ReplicationProgress;
//Set channels
List<string> channels = new List<string>();
channels.Add("channel");
// I had try to do that but not working,
// the documents created after that hadn't got the channels
pull.Channels = channels;
push.Channels = channels;
pull.Start();
push.Start();
}
Thanks in advance.
Riccardo
Related
My app uses ListBlobsSegmentedAsync and the following loop never finishes:
// List blobs existing in container
HashSet<string> existingBlobNames = new HashSet<string>();
BlobResultSegment segment;
do
{
segment = await container.ListBlobsSegmentedAsync(null, cancellationToken).ConfigureAwait(false);
foreach (IListBlobItem blobListItem in segment.Results)
{
CloudBlockBlob blob = blobListItem as CloudBlockBlob;
if (blob != null)
{
existingBlobNames.Add(blob.Name);
}
}
}
while (segment.ContinuationToken != null);
It always returns exactly the same ContinuationToken & no results.
This was me who ported this logic from another service which worked successfully for years. Turned out that service always had the same bug. But since there could have been at most 10 blobs in a container it never hit it.
This code needs actually to pass a continuation token =) Here is the corrected version.
BlobContinuationToken continuationToken = null;
do
{
BlobResultSegment segment = await container.ListBlobsSegmentedAsync(continuationToken, cancellationToken).ConfigureAwait(false);
foreach (IListBlobItem blobListItem in segment.Results)
{
CloudBlockBlob blob = blobListItem as CloudBlockBlob;
if (blob != null)
{
existingBlobNames.Add(blob.Name);
}
}
continuationToken = segment.ContinuationToken;
}
while (continuationToken != null);
Using the YouTube Data API, I can find a channel with the "search" API:
https://www.googleapis.com/youtube/v3/search?part=snippet&q=Alexander+condrashov&type=channel&key=YOUR_API_KEY
This gives me one object in my items array.
But this is a "search" API, not a "channel" API.
I think that the correct way to find a channel is to use "Channels: list" API.
Trying to find channel by username gives me zero objects in my items array:
https://www.googleapis.com/youtube/v3/channels?part=snippet%2CcontentDetails%2Cstatistics&forUsername=Alexander+kondrashov&key=YOUR_API_KEY
Has anyone succeeded in using "Channels: list" with "forUsername" to find a channel?
I know this is old and you may have already figured something out, but unfortunately YouTube's Channels API isn't great for finding channels reliably for anything other than the channel's ID. As a workaround, I combine the two approaches to get a realiable result (though it takes two queries and costs more quota which is lame sauce).
For example (in C# using the Google SDKs):
public async Task<Channel> GetChannelByUsername(string username)
{
try
{
var channel = default(Channel);
var searchRequest = this.youtubeService.Search.List("snippet");
searchRequest.Q = username;
searchRequest.Type = "channel";
var searchResults = await searchRequest.ExecuteAsync();
if (searchResults != null && searchResults.Items.Count > 0)
{
var searchResult = searchResults.Items.FirstOrDefault(i => i.Snippet.ChannelTitle.ToLower() == username);
if (searchResult != null && searchResult.Snippet != null)
{
var channelSearchResult = searchResult.Snippet;
var channelListRequest = this.youtubeService.Channels.List("snippet");
channelListRequest.Id = channelSearchResult.ChannelId;
var channelListResult = await channelListRequest.ExecuteAsync();
if(channelListResult != null)
{
channel = channelListResult.Items.FirstOrDefault();
}
}
}
return channel;
}
catch (Exception ex)
{
// Handle Exception
}
}
My application actually has mail send / receive functionalities to handle.
While receiving the mail, i am unable to view the image which is an inline image being sent from outlook.
Can some one help me how can i catch the image and make available always.
I have java code like below,
try (InputStream stream = new ByteArrayInputStream(Base64
.getMimeDecoder().decode(mail))) {
MimeMessage message = new MimeMessage(null, stream);
Object messageContent = message.getContent();
if (messageContent instanceof String) {
body = (String) messageContent;
} else if (messageContent instanceof MimeMultipart) {
content = (MimeMultipart) messageContent;
for (int i = 0; i < content.getCount(); i++) {
BodyPart bodyPart = content.getBodyPart(i);
String disposition = bodyPart.getDisposition();
if (disposition == null
|| disposition
.equalsIgnoreCase(Part.INLINE)) {
Object object = bodyPart.getContent();
if (object instanceof String) {
body = object.toString();
} else if (object instanceof MimeMultipart) {
MimeMultipart mimeMultipart = (MimeMultipart) object;
String plainBody = null;
String htmlBody = null;
for (int j = 0; j < mimeMultipart.getCount(); j++) {
BodyPart multipartBodyPart = mimeMultipart
.getBodyPart(j);
String multipartDisposition = multipartBodyPart
.getDisposition();
String multipartContentType = multipartBodyPart
.getContentType();
if (multipartDisposition == null
&& multipartContentType != null) {
if (multipartContentType
.contains(MediaType.TEXT_HTML)) {
htmlBody = multipartBodyPart
.getContent().toString();
} else if (multipartContentType
.contains(MediaType.TEXT_PLAIN)) {
plainBody = multipartBodyPart
.getContent().toString();
}
}
}
if (htmlBody != null) {
body = htmlBody;
} else {
body = plainBody;
}
}
}
}
}
Client side i am using CKEditor to handle email body data.
Thanks a lot.
i got a solution from the example shared below
https://www.tutorialspoint.com/javamail_api/javamail_api_fetching_emails.htm
But, this example explains, how to find the image in body and store.
I have also done below to replace src
`
Pattern htmltag = Pattern.compile("]src=\"[^>]>(.?)");
Pattern link = Pattern.compile("src=\"[^>]\">");
String s1 = "";
Matcher tagmatch = htmltag.matcher(s1);
List<String> links = new ArrayList<String>();
while (tagmatch.find()) {
Matcher matcher = link.matcher(tagmatch.group());
matcher.find();
String link1 = matcher.group().replaceFirst("src=\"", "")
.replaceFirst("\">", "")
.replaceFirst("\"[\\s]?target=\"[a-zA-Z_0-9]*", "");
links.add(link1);
s1 = s1.replaceAll(link1, "C:\\//Initiatives_KM\\//image.jpg");
}
`
And on top of this, i gonna do Base64 encoding so that i dont require store in file system.
encodedfileString = Base64.getEncoder().encodeToString(bArray);
With all these i can conclude to say, i got solution for my issue. Thank you.
I am seeing errors while exporting email in office 365 account using ews managed api, "The server cannot service this request right now. Try again later." Why is that error occurring and what can be done about it?
I am using the following code for that work:-
_GetEmail = (EmailMessage)item;
bool isread = _GetEmail.IsRead;
sub = _GetEmail.Subject;
fold = folder.DisplayName;
historicalDate = _GetEmail.DateTimeSent.Subtract(folder.Service.TimeZone.GetUtcOffset(_GetEmail.DateTimeSent));
props = new PropertySet(EmailMessageSchema.MimeContent);
var email = EmailMessage.Bind(_source, item.Id, props);
bytes = new byte[email.MimeContent.Content.Length];
fs = new MemoryStream(bytes, 0, email.MimeContent.Content.Length, true);
fs.Write(email.MimeContent.Content, 0, email.MimeContent.Content.Length);
Demail = new EmailMessage(_destination);
Demail.MimeContent = new MimeContent("UTF-8", bytes);
// 'SetExtendedProperty' used to maintain historical date of items
Demail.SetExtendedProperty(new ExtendedPropertyDefinition(57, MapiPropertyType.SystemTime), historicalDate);
// PR_MESSAGE_DELIVERY_TIME
Demail.SetExtendedProperty(new ExtendedPropertyDefinition(3590, MapiPropertyType.SystemTime), historicalDate);
if (isread == false)
{
Demail.IsRead = isread;
}
if (_source.RequestedServerVersion == flagVersion && _destination.RequestedServerVersion == flagVersion)
{
Demail.Flag = _GetEmail.Flag;
}
_lstdestmail.Add(Demail);
_objtask = new TaskStatu();
_objtask.TaskId = _taskid;
_objtask.SubTaskId = subtaskid;
_objtask.FolderId = Convert.ToInt64(folderId);
_objtask.SourceItemId = Convert.ToString(_GetEmail.InternetMessageId.ToString());
_objtask.DestinationEmail = Convert.ToString(_fromEmail);
_objtask.CreatedOn = DateTime.UtcNow;
_objtask.IsSubFolder = false;
_objtask.FolderName = fold;
_objdbcontext.TaskStatus.Add(_objtask);
try
{
if (counter == countGroup)
{
Demails = new EmailMessage(_destination);
Demails.Service.CreateItems(_lstdestmail, _destinationFolder.Id, MessageDisposition.SaveOnly, SendInvitationsMode.SendToNone);
_objdbcontext.SaveChanges();
counter = 0;
_lstdestmail.Clear();
}
}
catch (Exception ex)
{
ClouldErrorLog.CreateError(_taskid, subtaskid, ex.Message + GetLineNumber(ex, _taskid, subtaskid), CreateInnerException(sub, fold, historicalDate));
counter = 0;
_lstdestmail.Clear();
continue;
}
This error occurs only if try to export in office 365 accounts and works fine in case of outlook 2010, 2013, 2016 etc..
Usually this is the case when exceed the EWS throttling in Exchange. It is explain in here.
Make sure you already knew throttling policies and your code comply with them.
You can find throttling policies using Get-ThrottlingPolicy if you have the server.
One way to solve the throttling issue you are experiencing is to implement paging instead of requesting all items in one go. You can refer to this link.
For instance:
using Microsoft.Exchange.WebServices.Data;
static void PageSearchItems(ExchangeService service, WellKnownFolderName folder)
{
int pageSize = 5;
int offset = 0;
// Request one more item than your actual pageSize.
// This will be used to detect a change to the result
// set while paging.
ItemView view = new ItemView(pageSize + 1, offset);
view.PropertySet = new PropertySet(ItemSchema.Subject);
view.OrderBy.Add(ItemSchema.DateTimeReceived, SortDirection.Descending);
view.Traversal = ItemTraversal.Shallow;
bool moreItems = true;
ItemId anchorId = null;
while (moreItems)
{
try
{
FindItemsResults<Item> results = service.FindItems(folder, view);
moreItems = results.MoreAvailable;
if (moreItems && anchorId != null)
{
// Check the first result to make sure it matches
// the last result (anchor) from the previous page.
// If it doesn't, that means that something was added
// or deleted since you started the search.
if (results.Items.First<Item>().Id != anchorId)
{
Console.WriteLine("The collection has changed while paging. Some results may be missed.");
}
}
if (moreItems)
view.Offset += pageSize;
anchorId = results.Items.Last<Item>().Id;
// Because you’re including an additional item on the end of your results
// as an anchor, you don't want to display it.
// Set the number to loop as the smaller value between
// the number of items in the collection and the page size.
int displayCount = results.Items.Count > pageSize ? pageSize : results.Items.Count;
for (int i = 0; i < displayCount; i++)
{
Item item = results.Items[i];
Console.WriteLine("Subject: {0}", item.Subject);
Console.WriteLine("Id: {0}\n", item.Id.ToString());
}
}
catch (Exception ex)
{
Console.WriteLine("Exception while paging results: {0}", ex.Message);
}
}
}
I'm having some trouble doing aggregation on a particular column in HBase.
This is the snippet of code I tried:
Configuration config = HBaseConfiguration.create();
AggregationClient aggregationClient = new AggregationClient(config);
Scan scan = new Scan();
scan.addColumn(Bytes.toBytes("drs"), Bytes.toBytes("count"));
ColumnInterpreter<Long, Long> ci = new LongColumnInterpreter();
Long sum = aggregationClient.sum(Bytes.toBytes("DEMO_CALCULATIONS"), ci , scan);
System.out.println(sum);
sum returns a value of null.
The aggregationClient API works fine if I do a rowcount.
I was trying to follow the directions in http://michaelmorello.blogspot.in/2012/01/row-count-hbase-aggregation-example.html
Could there be a problem with me using a LongColumnInterpreter when the 'count' field was an int? What am I missing in here?
You can only use long(8bytes) to do sum with default setting.
Cause in the code of AggregateImplementation's getSum method, it handle all the returned KeyValue as long.
List<KeyValue> results = new ArrayList<KeyValue>();
try {
boolean hasMoreRows = false;
do {
hasMoreRows = scanner.next(results);
for (KeyValue kv : results) {
temp = ci.getValue(colFamily, qualifier, kv);
if (temp != null)
sumVal = ci.add(sumVal, ci.castToReturnType(temp));
}
results.clear();
} while (hasMoreRows);
} finally {
scanner.close();
}
and in LongColumnInterpreter
public Long getValue(byte[] colFamily, byte[] colQualifier, KeyValue kv)
throws IOException {
if (kv == null || kv.getValueLength() != Bytes.SIZEOF_LONG)
return null;
return Bytes.toLong(kv.getBuffer(), kv.getValueOffset());
}