I've installed openssh for windows and when I run ssh localhost I get
Bad owner or permissions on C:\Users\gary/.ssh/config
I've looked at these 2 questions https://superuser.com/questions/348694/bad-owner-or-permissions-error-using-cygwins-ssh-exe and https://serverfault.com/questions/253313/ssh-returns-bad-owner-or-permissions-on-ssh-config but none of the answers work for me. sshd is running as a service as the Local System user. I've run chmod 0600 C:\Users\gary\.ssh\config and chown gary C:\Users\gary\.ssh\config. I've also cleared the ACL by running setfacl -b C:\Users\gary\.ssh\config and then chmod 0600 C:\Users\gary\.ssh\config again. I've also tried changing the owner to SYSTEM and got the same error.
I'm not sure what else to do, is there anything wrong with my setup? I also have git installed which installed mingw, I deleted ssh and sshd from my git installation so they wouldn't be on my path.
Other commands I've run are
icacls "C:\Users\gary\.ssh\config" /setowner gary
chown -R gary:1049089 C:\Users\gary\.ssh
ls -la C:\Users\gary\.ssh\config shows
-rw-r--r-- 1 gary 1049089 229 Jan 3 14:43 'C:\Users\gary.ssh\config'
it keeps showing this even after changing the owner to SYSTEM, but in the file properties in file explorer it shows SYSTEM as the owner
This started popping up immediately after I created another user with Administrator privileges, and that account began inheriting access to my .ssh folder.
You do not need to change your permissions whatsoever.
Just go to .ssh, right-click Properties, Security Tab, Advanced. DISABLE INHERITANCE, then click on the Administrator user (the one that is not you) and Remove them. Apply. Done.
Use ssh client from Git instead of Windows inbuilt SSH client. E.g. set VS Code to use C:\Program Files\Git\usr\bin\ssh.exe instead of C:\Windows\System32\OpenSSH\ssh.exe.
Steps:
In VS Code navigated to [File] -> [Preferences] -> [Settings] -> Search remote.ssh.path
Input C:\Program Files\Git\usr\bin\ssh.exe
Alternatively:
Update PATH environment variable to point to Git bin before Windows System32.
Type "env" in Start bar to edit System (or account) environment variables.
Select Path and hit edit.
Add C:\Program Files\Git\usr\bin\ssh.exe to the list and move it to the top of the list.
Just got same issue after re-install windows. And easily fixed just by changing the file permissions to
SYSTEM & Administrators - Full Control
[your username] - Modify & as Owner
Note:
I'm still using Windows 10 built-in SSH client C:\Windows\System32\OpenSSH\ssh.exe & not using cygwin at all
For those still struggling with this, check this out: https://github.com/PowerShell/openssh-portable/pull/418. This was the case for me. It turns out that your computer should be named differently from your username... 🤷♂️ It will probably be fixed soon in future updates, because fix got into commit.
So again: if your computer name is the same as your username and you still haven't fixed this issue with permissions dialog, then probably renaming your computer could help.
Instead of using the properties box, you can use the one liner:
icacls .ssh /grant:r <yourUserName>:f /inheritance:r
/grant:r username:f -> grant and overwrite permissions, giving full permissions to username
/inheritance:r -> remove inherited permissions
Keep known_hosts writable with
icacls .ssh/known_hosts /grant:rw <username>:f /inheritance:r
I'm not sure what version of Windows you're running, but since this is recent I'd guess Windows 10. I recently found out that an OpenSSH client is installed by default as of the April 2018 update. I then found I had two instances of OpenSSH: the one I installed myself and the one Windows gave me. Uninstalling the one I had installed caused the error message you describe.
The solution that worked for me was to remove the user-installed OpenSSH as well as the C:\Users\username\.ssh folder, and let Windows 10 OpenSSH create the folder when you run the command the next time. I didn't have any configuration I was worried about losing, but if you do I'd suggest copying and pasting the contents of the files somewhere and recovering them afterwards.
Hope this helps!
Having the exact same issue today, this is how I solved it:
Go to C:\Users\username.ssh
Right-click the config file
Properties -> Security -> Advanced -> Disable Inheritance -> Disable
inheritance -> Remove all inherited permissions from this object ->
Apply -> Yes -> Ok -> Ok
Use FixUserFilePermissions.ps1 to fix permissions of client side files - keys and config files of current user.
git clone git#github.com:PowerShell/openssh-portable.git
cd openssh-portable/contrib/win32/openssh
.\FixUserFilePermissions.ps1 -Confirm:$false
On windows server this is due to permission problem. Need to remove access to other users for the following folders
.ssh - folder
Right click on this folder -> Select "Give access to" - > Click on "Remove Access"
Right click on this folder -> Select "properties" - > "Securities" - > Click on "Edit Permissions" - Remove other users except the ID you are logged in.
Repeat the same process for the folder under which you have .pem file. (Note: Keep .pem file in a separate folder)
For anyone, who still has troubles after applying the owner + modify (plus full control for admins): it did not work for me. Then I saw a solution to remove all other users (incl all admins), which did not help either.
This worked for me:
leave System and Administrators in place, with full control, as suggested above
leave the user itself in place, as owner, with modify, as suggested above
however, remove any other user or group. You probably need to go to advanced first, to disable inheritance of rights
after I removed an administrative user who was added by Windows after entering my folder (by passing through the UAC box), it worked for me again.
Hope this helps for anyone who encounters this specific issue :-)
If User is in Administrative group just keep configuration in
c:\programdata\ssh\ssh_config instead %USERPROFILE%.ssh\config, will work
after disabling inheritance, make sure you add your current user, else u cannot edit the file
For me it was fixed by running chmod 0644 config under ~/.ssh/. Earlier it was set to 755 which was causing "Bad owner or permissions on /home/home/.ssh/config"
I tried all the solutions above, and sadly still can't fix this issue. I'm pretty sure the permission of my ssh config is correct, this has been verified by the Explore GUI and the Get-Acl commands.
Then I finally find a way to solve it:
delete the entire .ssh folder and then open powershell and type ssh localhost. It will create a new .ssh folder for you, then you can apply the above permission tweaks(for me I only did one thing: disable inheritance).
So if other solutions doesn't work for you, maybe you can try this. Hope it's helpful.
PS: don't forget to backup your old .ssh folder before deleting it.
I was having this problem, and no amount of changing permissions or disabling inheritance on the config file would fix it. It turned out that it did not like my computer name and user name being the same, so I re-named my computer, allowed open ssh to re-create the config file, and the permissions are now correct. That was probably a bad idea to begin with, tbh.
I deleted C:\Users\user/.ssh/config and reran my stuff, then it worked.
However, if you have something valuable there, make a backup first, just in case!
After a domain change over, I started having this same problem. Went through all of the suggestions listed and nothing worked, including both chmod and chown solutions.
I ended up fixing the problem by copying the folder, pasting it, deleting the original, and then renaming it back to .ssh.
The problem seems from the files are owned/has-permission for more than one user.
1- Go to your ./ssh folder and for both config & id_rsa files. From the properties -> Security -> Advanced:
2- Make sure that the user that you are logged in with IS the only user there.
No group change or whatever,the first answer is right.Change to git ssh.exe
How?
uninstall win10's openssh in Settings
add path of git's ssh.exe to your Path
For me it was fixed by running chmod 0644 config under ~/.ssh/ when running WSL.
Rename the config file to something like config2
Open this file with notepad
Save As config (original name)
This worked for me.
I guess it was caused by the wrong path expression.
Bad owner or permissions on C:\Users\gary/.ssh/config
The /.ssh should be \.ssh. So I try to use git bash (the terminal tool when install git in Windows system) to run ssh command. It really works. But I don't really know if it is caused by the reason I guessed.
Hi guys after a troubleshoot for a day I found that this "m.. f.." config file should not stand in the .ssh/ path.
For VSCODE just set the config in 'C:\ProgrmaData\ssh\ssh_config' path as proposed in the second choice of the palette command, and forget .shh path for this configuration.
That worked fine for me.
Nota: there was also a known_host file also created here with strange VM names inside, I deleted also this file. and that helps
For me, re-editing the permission settings in Windows is too complicated. Regenerating another configuration in vscode does not work either.
I set a custom config file path to solve this problem.
["Remote SSH: Config file"]
The absolute file path to a custom SSH config file.
note: search this option by #ext:ms-vscode-remote.remote-ssh,ms-vscode-remote.remote-ssh-edit config file
This is because the config file cannot be accessed normally. We can create a new config file (this file needs to be accessible normally), such as D:/.ssh/config, and then specify the configuration file through the -F option: ssh -F D:/.ssh/config username#ip_address -p port
Delete the .config file, it has worked for me
I am currently working on a Windows batch file that will allow me to silently install git (the executable for which will be placed in the folder that the .bat file will be running from) in a pre-specified location on the file system.
I've found this article which seems to provide some suitable advice:
https://github.com/msysgit/msysgit/wiki/Silent-or-Unattended-Installation
However, I'm not entirely sure what parameters I would need to mention in my LOADINF file. I would like to pre-define the options that the user would manually select throughout the various stages of installation, so that it can run through from start to finish without prompting anything from the user.
Can anyone help or point me to a place where I can find these parameters and their available values?
Create a file, for eg. my-config.cnf (or my-config.ini) with the following content:
[Setup]
Lang=default
Dir=C:\Program Files (x86)\Git
Group=Git
NoIcons=0
SetupType=default
...
<other options as shown in the msysgit wiki>
Now, in the batch file, when you execute the installation file (say msysgit-install.exe), use /LOADINF as follows:
msysgit-install.exe /SILENT /LOADINF="my-config.cnf"
I'm trying to use the Microsoft User State Migration tool with Powershell; the way the program "loadstate.exe" works is that it needs to be called locally so that it will load up a remotely saved state of the user's profile and then restore it to the local computer.
I am seeking to automate this with Powershell; in order to do this, I have written a script that will elevate the user to run Powershell in Executive/Administrative mode and then execute the following command, against the USMT program that is installed on all of our computers:
c:\usmt\loadstate.exe /i:$configfile $storepath
Where $configfile is the name of the configuration file and the store path is the name of where the files are stored at. This all works, except that when run from remote, it seems to try to execute it from the System context - the desktop files are instead restored with the ACL permissions of CREATOR OWNER, SYSTEM, and Administrators - rather than giving it to the actually logged on user.
So if I have it set as a logon script, and try to have it execute when the user GuineaPig logs in, it will seek to restore the files and it will actually restore it - but all desktop items will be invisible to GuineaPig because she doesn't have any rights to see them.
If I just have the script locally, say on the user's C:\ DRIVE, and then right-click and "Run as Powershell Script", it works fine.
How do I execute this remote powershell script(located on our domain controller) so that it will actually run it in the context of the local user?
Alternately, how do I just tell the Group Policy of a logon script to just run something from the user's computer? I can also just set the script to be copied to the C:\ of every local computer, I just need the logon policy to actually run it from the C:\ of every local computer as the locally logged on user.
Thanks in advance.
Based on a recommendation on stack overflow, i am giving yii framework a spin.
It appears that I am only able to gain shell access to my web server if I log in as root.
I am running through the tutorial, and am having a number of problems typical command to create a web app-
/usr/local/bin/php /home/testuser/public_html/yii/framework/yiic webapp /home/testuser/public_html/demo
Do I have to type /usr/local/bin/php EVERY TIME???
Do I have to type /home/testuser/public_html/yii/framework/yiic in full every time???
Do I have to yype /home/testuser/public_html/demo in full?
As I am logged in as ROOT, I have to chown every file / folder created by root to make the file viewable by testuser!!!
I create a new controller using yii. controller message helloWorld, yii does some funky stuff, but I can't do ANYTHING with the files without chown EVERYTHING!!!
I'm not too confident with SSH, and I know it's all a learning curve, but... having to change file permissions EVERY time, and having to type full directories every time is just a pain.
I know that there are some shortcuts that I will probably learn with time, but if anybody could give me some pointers to make my life about 1M times easier (considering my main objectives at present are to learn yii framework) linux/terminal/shell commands are currently secondary to my requirements.
Here's what I'd do, in this order:
1 - When you login as root issue the command su - testuser. This changes your effective user id and groupid to that of testuser, meaning, you now are operating as that user account. Your current directory should now be the testuser's home directory. To get back to root user just type exit.
2 - Try running php -v without the fullpath. If it prints out a version number then you don't have to use the fullpath to run php. If you get an error then you can add /usr/local/bin to your PATH environment variable in your .profile file which is present in testuser's home directory. If the .profile doesn't exist then you can create it.
3 - Add /home/testuser/public_html/yii/framework to your PATH in testuser's .profile.
After doing all that then the next time you login as root you would be able to do the following:
su - testuser
cd public_html
php yiic webapp demo
And you wont have to worry about permissions since you are creating directories/files as testuser, not root.
See also: StackOverflow question about modifying your PATH