Using make's ''Remaking Makefiles'' feature I am generating parts of my makefile with include directives (see Makefile: defining rules and prerequisites in recipes). Now I'm stuck with being unable to see how I can express dependencies between included makefiles. They seem to be all evaluated at once.
Consider the following minimal makefile that illustrates my problem:
all:
-include foo.make
-include bar.make
foo.make: Makefile
echo FOO:=blub bla baz > foo.make
bar.make: Makefile foo.make
echo BAR:=$(FOO) > bar.make
If I now run make I will get:
$ cat foo.make
FOO:=blub bla baz
$ cat bar.make
BAR:=
Why? Since bar.make depends on foo.make, shouldn't the evaluation of bar.make wait until it successfully included foo.make?
And how do I fix this problem and make sure that bar.make is either re-evaluated later or only evaluated once foo.make exists, is included and can define the variable BAR?
The reason I cannot combine foo.make and bar.make into a single makefile and rule is two-fold:
Firstly, in my real setup, bar.make depends on more intermediate targets which in turn transitively depend on foo.make. So at the time foo.make can be created, the content of bar.make cannot yet be made.
Secondly, in my real setup, foo.make and bar.make do not just define variables but also eval() define/endef blocks. So I have to write:
-include makefile_with_prerequisite_variables
define MYDEF
sometarget-$1: $(TARGET_$1_PREREQUISITES)
[...]
endf
-include makefile_with_eval_call_statements
The content of makefile_with_prerequisite_variables and makefile_with_eval_call_statements cannot go into a single makefile snippet:
If I would put makefile_with_eval_call_statements above MYDEF together with makefile_with_prerequisite_variables then the $eval( $call( MYDEF)) statements in it would not work because MYDEF is only declared afterward.
If I would put makefile_with_prerequisite_variables below MYDEF together with makefile_with_eval_call_statements then the recipes defined in MYDEF would not have proper prerequisits because the $(TARGET_$1_PREREQUISITES) variables would then be declared afterward by makefile_with_prerequisite_variables.
In summary, I need to include two different makefiles where one depends upon the other. I do not know how I can express this relationship such that the content of one makefile would only be created after the other makefile is up-to-date and included into the main makefile.
First, your makefile creation in this simple example can easily be fixed by escaping the value of $(FOO) so that it's not expanded when bar.make is created but rather deferred until it's read in. So:
bar.make: Makefile foo.make
echo 'BAR:=$$(FOO)' > $#
However, that might not be sufficient in your more complex real-life makefiles.
GNU make works like this: first parse all the makefiles. Then for every included makefile, treat it as a goal and try to build it (e.g., act as if the user invoked make include1.mk include2.mk include3.mk ...). Then at the end of that, if any of the included makefiles was rebuilt, re-exec ourselves and start the entire process over from scratch.
GNU make does NOT work like this: parse makefiles, try to rebuild the first included makefile and if it's rebuilt, re-exec; if it's not rebuilt go on to the next included makefile, etc.
A simple trick you can use if you have to have this type of order is to put the include of bar.make into foo.make:
all:
-include foo.make
foo.make: Makefile
printf -- '-include bar.make' > $#
echo FOO:=blub bla baz >> $#
bar.make: Makefile foo.make
echo 'BAR:=$$(FOO)' > $#
By doing this you ensure that if foo.make doesn't exist, make can't see the include of bar.make and so it won't try to build it. Only after the first re-exec will make see the include of bar.make and try to build it.
One thing: if you get the latest version of GNU make you no longer need to use the -include trick. You can just use include even with generated makefiles.
Related
Imagine we have an existing (untouchable) Makefile with target "foo", and another included Makefile which I can modify. I would like to add a new target called "runafter" which shall be executed after "foo" was run. So the user keeps calling "foo" and some additional code shall be run afterwards.
The usual way to achieve this would be to rename the original ones and do something like:
foo_old:
...
foo: foo_old
# run some code or call another target explicitly
$(MAKE) runafter
But that only works if you can rename foo. If not, how could I extend the behavior of the existing target? Everything I tried to do with foo: ... apparently causes overriding of the old foo target (with warning). But I just want to run some code afterwards!
I do not see how to do this from the included makefile but if you use GNU make then you can add a makefile named makefile instead of Makefile:
$ cat makefile
foo:
$(MAKE) -f Makefile $#
$(MAKE) runafter
runafter:
...
From the GNU make man page:
If no -f option is present, make will look for the makefiles GNUmakefile, makefile, and Makefile, in that order.
So you can also name it GNUmakefile if you wish. With one or the other running make foo should do what you want.
I have a Makefile with tons of targets and would like for a certain script to get executed first, irrespective of what target is being called. I like to call it a global prerequisite.
I do not want to create a target for the script and set it as a prerequisite for all existing targets (which, as I said aren't few). Besides, someone else could add a target in future and not add my script as a prerequisite for their target, so the global prerequisite would take care of that.
Does GNU-make provide for a means to achieve this?
Another approach:
-include dummy
.PHONY: dummy
dummy:
run-the-script
Make will always attempt to rebuild any file which the makefile attempts to include (if it is out of date or does not exist). In this case there is no such file, and the rule to build it runs the script and does nothing else.
There is a solution without modifying your existing Makefile (main difference with the answers pointed to by tripleee). Just create a makefile containing:
.PHONY: all
all:
pre-script
#$(MAKE) -f Makefile --no-print-directory $(MAKECMDGOALS) MAKE='$(MAKE) -f Makefile'
post-script
$(MAKECMDGOALS): all ;
The only drawback is that the pre- and post- scripts will always be run, even if there is nothing else to do. But they will not be run if you invoke make with one of the --dry-run options (other difference with the answers pointed to by tripleee).
I have a makefile that looks something like this:
include anotherFile.mk
all:
someStuff
The file anotherFile.mk is like this:
include yetAnotherFile.mk
export SOME_VAR = 93
The problem is that anotherFile.mk and yetAnotherFile.mk are in a different directory from my Makefile. So my makefile can't just be changed to this:
include $(OTHER_PROJECT_PATH)/anotherFile.mk
all:
someStuff
The problem with this approach is that the include statement in anotherFile.mk will fail because it will be searching in the current directory.
A partial solution that I found is to pass the --include-dir=$OTHER_PROJECT_PATH flag to the invocation of make, but that's a bit user-unfriendly.
So my question is: Is there something I can put inside my makefile that will add to the directories that make searches for when executing an include? Something like MAKE_INCLUDE_DIRS += $(OTHER_PROJECT_PATH)
Surprisingly there doesn't seem to be a good answer to that question. Forcing .INCLUDE_DIR doesn't help and there doesn't seem to be any way around invoking make with --include-dir=$OTHER_PROJECT_PATH.
It is however possible to put the appropriate recursive make invocation inside the makefile but, in order to get it to work for all reasonable cases it quickly becomes too complicated to be worth it. In summary it requires:
a top level condition to check if the OTHER_PROJECT_PATH is in .INCLUDE_DIR
the appropriate target with the recipe invoking make recursively
possibly additional targets if there are multiple command goals
the real make file enclosed in the else part of the conditional
You Makefile would look like this:
OTHER_PROJECT_PATH := other
ifeq (,$(filter $(OTHER_PROJECT_PATH), $(.INCLUDE_DIRS)))
# this is the mechanism to add the include dir in a recursive make
$(or $(firstword $(MAKECMDGOALS)),all):
$(MAKE) -I$(OTHER_PROJECT_PATH) $(MAKECMDGOALS)
# add empty targets for additional goals if needed
ifneq (,$(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS)))
$(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS)):
endif
else
# this is where the real makefile starts
all more:
echo $#: $< $^
include a.mak
endif
It still does not seem possible from a makefile, but if you have a script that sets up environment variables, you can use MAKEFLAGS (e.g. export MAKEFLAGS=I/your/path ordentlich on Linux, or SET on Windows)
Assume I have a make rule:
.PHONY:gen
gen: auto.template
generate-sources auto.template
that creates a bunch of files, for example auto1.src, auto2.src, auto3.src and so on.
If I now have rules to build targets from *.src files, like this:
$(patsubst %.src,%.target,$(wildcard *.src)): %.target: %.src
build $< > $#
How can I tell make to first execute the gen rule and then expand the preconditions for the second rule template? GNU extensions are welcome.
Note: I would like to keep it in one make invocation; A trivial solution to this would be to put the second rule in a secondary Makefile.secondrun and call $(MAKE) -f Makefile.secondrun after gen was processed. But I was wondering if there is a better option.
Building off Beta's answer, here's how you can do it using makefile remaking in GNU make, which is not the same thing as recursive make. Rather, it updates an included makefile using a rule in the main makefile, then restarts the original make instance. This is how *.d dependency files are typically generated and used.
# Get the list of auto-generated sources. If this file doesn't exist, or if it is older
# than auto.template, it will get built using the rule defined below, according to the
# standard behavior of GNU make. If autosrcs.mk is rebuilt, GNU make will automatically
# restart itself after autosrcs.mk is updated.
include autosrcs.mk
# Once we have the list of auto-generated sources, getting the list of targets to build
# from them is a simple pattern substitution.
TARGETS=$(patsubst %.src,%.target,$(AUTO_SRCS))
all: $(TARGETS)
# Rule describing how to build autosrcs.mk. This generates the sources, then computes
# the list of autogenerated sources and writes that to autosrcs.mk in the form of a
# make variable. Note that we use *shell* constructs to get the list of sources, not
# make constructs like $(wildcard), which could be expanded at the wrong time relative
# to when the source files are actually created.
autosrcs.mk: auto.template
./generate-sources auto.template
echo "AUTO_SRCS=`echo *.src`" > autosrcs.mk
# How to build *.target files from *.src files.
%.target: %.src
#echo 'build $< > $#'
Short answer: you can't. Make determines all of the rules it will have to execute before it executes any rule.
Longer answer: maybe you can. As you say, you can use recursive Make explicitly, or surreptitiously by, say, building a file which your makefile will include (I'm looking at you, Jack Kelly). Or if you could somehow obtain a list of the files which gen will build, you could write a rule around that. Or you could take a leap of faith like this:
%.target: %.src
build $< > $#
%.src: gen;
When I change a Makefile, its rules may have changed, so they should be reevaluated, but make doesn't seem to think so.
Is there any way to say, in a Makefile, that all of its targets, no matter which, depend on the Makefile itself?
(Regardless of its name.)
I'm using GNU make.
This looks like one more simple, useful, logical thing that Make should be able to do, but isn't.
Here is a workaround. If the clean rule is set up correctly, Make can execute it whenever the makefile has been altered, using an empty dummy file as a marker.
-include dummy
dummy: Makefile
#touch $#
#$(MAKE) -s clean
This will work for most targets, that is targets that are actual files and that are removed by clean, and any targets that depend on them. Side-effect targets and some PHONY targets will slip through the net.
Since GNU make version 4.3 it is now possible with the use of those two special variable:
.EXTRA_PREREQS
To add new prerequisite to every target
MAKEFILE_LIST
To get the path of the make file
To have every target depend on the current make file:
Put near the top of the file (before any include since it would affect the MAKEFILE_LIST) the following line:
.EXTRA_PREREQS:= $(abspath $(lastword $(MAKEFILE_LIST)))
To have every target depend on the current make file and also the make files which were included
Put the following line at the end of your file:
.EXTRA_PREREQS+=$(foreach mk, ${MAKEFILE_LIST},$(abspath ${mk}))
The only answer I know to this is to add makefile explicitly to the dependencies. For example,
%.o: %.c makefile
$(CC) $(CFLAGS) -c $<