I am trying to create an event handler using php artisan but it just won't work. It works perfectly with anything else for example event.
This is what I use in the cmd:
php artisan handler:event myhandler
This is the response:
[Symfony\Component\Console\Exception\CommandNotFoundException]
There are no commands defined in the "handler" namespace.
Command handler:event was removed in 5.1, you can't use it anymore.
Maybe you're looking for php artisan event:generate command.
Related
I use PhpStorm 2018.1.4. I installed the package laravel-ide-helper. This allows PhpStorm to see model methods, but it doesn't see any chaining methods from Laravel helpers. For example, I have the following code in the controller:
return response()->file($path,['content-type' => 'application/pdf']);
PhpStorm says to me:
Method 'file' not found in \Illuminate\Contracts\Routing\ResponseFactory|\Illuminate\Http\Response.
How to fix it?
UPD: Of course, after install the package, I ran thees artisan commands:
php artisan ide-helper:generate
php artisan ide-helper:meta
Installing the laravel-ide-helper alone doesn't do anything. You need to run the artisan commands to generate the files that phpstorm will use.
php artisan ide-helper:generate
and
php artisan ide-helper:meta
Will help phpStorm's auto-completion.
Update: Since these are executed, the actual problem is a laravel structure issue:
The helper file() doesn't actually exist in the ResponseFactory (response() returns result of ResponseFactory) so IDE helper can't map to it.
file() does however exist in the Facade so if you were to do:
\Response::file($path,['content-type' => 'application/pdf']) it will auto complete.
It's a work around, but unless file() gets added to the response factory at laravel's level, there's not much ide helper or phpstorm can do.
I have an issue where the passport namespace is not available when I call passport:client. I set up a brand new Laravel project with version 5.6.34 where I installed Laravel passport according to the documentation. I also checked a similar question and followed all steps there with no sucess.
Calling php artisan passport:client --password --name="Test" from the command line works without any issues and I can see the client in the database.
However if I create a route in routes/web.php like so:
<?php
use Illuminate\Support\Facades\Route;
use \Illuminate\Support\Facades\Artisan;
Route::get('/', function () {
Artisan::call('passport:client', [
'--password' => true,
'--name' => "Test client",
'--quiet' => true,
]);
});
and use the Artisan facade to call the command I get the error below when I navigate to http://homestead.test/.
Symfony \ Component \ Console \ Exception \ CommandNotFoundException
The command "passport:client" does not exist.
I have added Laravel\Passport\PassportServiceProvider::class in the providers array in config/app.php.
How can I call the passport:client command from a web route?
We have a Laravel application that has several hundred database connections which are handled dynamically. In the admin interface you can create a new project and thus a new database where we need to generate a client.
My other option is the instantiate a ClientRepository and call the createPasswordGrantClient() method but I would like to avoid this if possible. I am curious to know why the namespace is available when called on the CLI but not via a request. I can call other commands such as migrate:fresh via a request but passport:client will fail even if it is part of the migration or inside another command.
According to this link, I ran the below commands.
composer update
php artisan config:cache
php artisan migrate
php artisan passport:install
This helped me.
I've installed Debugbar for Laravel as described in the steps on the website https://laravel-news.com/laravel-debugbar; and tried to make use of the Messages feature by placing the following below in my code.
Debugbar::info($object);
Debugbar::error('Error!');
Debugbar::warning('Watch out…');
Debugbar::addMessage('Another message', 'mylabel');
But when I run my website, I get the error message from Laravel saying:
1/1
FatalErrorException in HistoryController.php line 11:
Class 'App\Http\Controllers\Debugbar' not found
I have to go like /Debugbar::info(...) or put use Debugbar at the top of my code to not get the error message. Why can't I use it straight like Debugbar::info(...)?
To be able to reference the facade without prefixing it with \ you should add
use Barryvdh\Debugbar;
to the top of your controller.
after adding setting code in /config/app.php
you can use it as a facade
app('debugbar')->info('info message');
or
debugbar()->info('message');
no need use
I think you should try this :
first you add below code in config/app.php
in provider section
'Barryvdh\Debugbar\ServiceProvider',
in aliases section
'Debugbar' => 'Barryvdh\Debugbar\Facade',
after you should clear the cache like:
php artisan config:cache
php artisan cache:clear
php artisan config:clear
Hope this work for you !
Firstly, Go to the terminal and install by typing:-
composer require barryvdh/laravel-debugbar
In second step, Check your laravel verision:-
php artisan --version
In third if your laravel version is greater than 5(Laravel 5.x)
add the ServiceProvider to the providers array in config/app.php
Barryvdh\Debugbar\ServiceProvider::class,
add this to your facades in app.php:
'Debugbar' => Barryvdh\Debugbar\Facade::class,
Finally, published vendor configuration by command:-
php artisan vendor:publish --provider="Barryvdh\Debugbar\ServiceProvider"
After vendor published clear cache,route,view by command
php artisan cache:clear
php artisan route:clear
php artisan config:clear
php artisan dump-autoload -o
I Use laravel 5.1 , I received "Class MySeederClass does not exist " when use --class in php artisan db::seed(like php artisan db::seed --class=MySeederClass) , but when I run this command without class parameter, every thing is ok, what is this parameter problam??
If somebody will have the same error just try to update your composer auto loader class with command.
composer dump-autoload
I have been looking in the docs for a solution to make views with basic CURD operations but without much success.
I guess this might be pretty simple, but am missing something or not looking hard enough.
i can make models and controllers using the below artisan commands
php artisan make:model modelName
php artisan make:controller controllerName
But how do we make the basic CURD views. something like
php artisan make:views
cant find any doc for this. Please help
At the time of writing, there isn't a way to create views via artisan without writing your own command or using a third party package. You could write your own as already suggested or use sven/artisan-view.
if you are using laravel 5.1 or 5.2 this gist can help you make:view command just create command copy and paste the code from gist.
Step 1:
php artisan make:command MakeViewCommand
Step 2:
copy class from this gist
https://gist.github.com/umefarooq/ebc617dbf88260db1448
Laravel officially doesn't have any Artisan cammands for views.
But you could add third party plugins like Artisan View
Here's the link Artisan View
After adding this plugin to your project by the guide provided here you should be able to perform following cammands :
Create a view 'index.blade.php' in the default directory
$ php artisan make:view index
Create a view 'index.blade.php' in a subdirectory ('pages')
$ php artisan make:view pages.index
Create a view with a different file extension ('index.html')
$ php artisan make:view index --extension=html
There is very easy way to create a view(blade) file with php artisan make:view {view-name} command using Laravel More Command Package.
First Install Laravel More Command
composer require theanik/laravel-more-command --dev
Then Run
php artisan make:view {view-name}
For example
It create index.blade.php in resource/views directory
php artisan make:view index
It create index.blade.php in resource/views/user directory
php artisan make:view user/index
Thank you.
In v5.4 you need to create the command with:
php artisan make:command MakeView
and before you can use it, it must be registered in App/Console/Kernel like
protected $commands = [
Commands\MakeView::class
];
then you make a view like: php artisan make:view posts/create
To create a view (blade) file through command in laravel 8:
composer require theanik/laravel-more-command --dev
php artisan make:view abc.blade.php
You can install sven/artisan-view package to make view from CMD, to install package write this command:
composer require sven/artisan-view --dev
After installing it, you can make a single view or folder with all views that contain {index-create-update-show}
To make a single file we using this command:
php artisan make:view Name_of_view
For example
php artisan make:view index
To make a folder that contain all resources index - create - update - show write name of folder that contain all this files for example:
php artisan make:view Name_of_Folder -r
For example:
php artisan make:view blog -r
-r is a shorthand for --resource you can write full name or shorthand to make resource.
you can extend yields from master page if master page inside in directory layouts we write command sith this format
php artisan make:view index --extends=layouts.master --with-yields
layouts is a directory this directory may be with a different name in your project the idea is name_of_folder/master_page that you want to extend yields from it.
For more view docs