I've installed Debugbar for Laravel as described in the steps on the website https://laravel-news.com/laravel-debugbar; and tried to make use of the Messages feature by placing the following below in my code.
Debugbar::info($object);
Debugbar::error('Error!');
Debugbar::warning('Watch out…');
Debugbar::addMessage('Another message', 'mylabel');
But when I run my website, I get the error message from Laravel saying:
1/1
FatalErrorException in HistoryController.php line 11:
Class 'App\Http\Controllers\Debugbar' not found
I have to go like /Debugbar::info(...) or put use Debugbar at the top of my code to not get the error message. Why can't I use it straight like Debugbar::info(...)?
To be able to reference the facade without prefixing it with \ you should add
use Barryvdh\Debugbar;
to the top of your controller.
after adding setting code in /config/app.php
you can use it as a facade
app('debugbar')->info('info message');
or
debugbar()->info('message');
no need use
I think you should try this :
first you add below code in config/app.php
in provider section
'Barryvdh\Debugbar\ServiceProvider',
in aliases section
'Debugbar' => 'Barryvdh\Debugbar\Facade',
after you should clear the cache like:
php artisan config:cache
php artisan cache:clear
php artisan config:clear
Hope this work for you !
Firstly, Go to the terminal and install by typing:-
composer require barryvdh/laravel-debugbar
In second step, Check your laravel verision:-
php artisan --version
In third if your laravel version is greater than 5(Laravel 5.x)
add the ServiceProvider to the providers array in config/app.php
Barryvdh\Debugbar\ServiceProvider::class,
add this to your facades in app.php:
'Debugbar' => Barryvdh\Debugbar\Facade::class,
Finally, published vendor configuration by command:-
php artisan vendor:publish --provider="Barryvdh\Debugbar\ServiceProvider"
After vendor published clear cache,route,view by command
php artisan cache:clear
php artisan route:clear
php artisan config:clear
php artisan dump-autoload -o
Related
I want my site to only be in swedish language. How to accomplish this?
In my lang/sv/ folder I have six files.
auth.php
pagination.php
passwords.php
sv.json
validation-inline.php
validation.php
The page source says html lang="sv" but everything is in english.
Also the email verification is in english.
This is what I have done so far.
In app\config\app.php I have change this
'locale' => 'sv',
'fallback_locale' => 'sv',
In my terminal I have run these commands.
composer dump-autoload
php artisan config:clear
php artisan view:clear
php artisan cache:clear
php artisan event:clear
php artisan optimize:clear
What else can I do?
I'm using Laravel 8.12.
I solved it. I had the sv.json file in the wrong folder.
It should be in lang folder not in lang\sv\ folder.
I have this error one production env. only on some routes, I see no difference between the routes that works and the few of them that don't work. All my routes are in web.php, and in front I try to access via Vuejs/Axios.
Also, the both url from error when I try to access them I get to https://, even if I try http:// , I get redirect to https.
What I tried till now.
.env
APP_URL=https://my.url
web.php
URL::forceScheme('https'); //at the top of the file
App/Providers/AppServiceProvider
public function boot()
{
URL::forceScheme('https');
}
Also:
composer dump-autoload
php artisan cache:clear
php artisan config:clear
php artisan view:clear
php artisan route:clear
php artisan config:cache
npm run prod
I found a strange solution.
I changed the route name from random_question to random, also the controller method name that was show to random and works.
i seperate my strings and put them in Constant directory in textConstant.php file , in my localhost everythings are okey but when i uploads my code on my server the string fade out and nothing show in my screen ,
here is my constant file :
return [
'title' => 'test',
'book' => 'book_test',
];
and here is my code that use constant :
<button>{{config('Constants.textConstant.book')}}</button>
please help me to solve my problem because my site cannot be usable, thanks alot :)
Try to run the following code over commandline if you have enabled the cache.
php artisan config:clear
php artisan config:cache.
In CMD;
Write first
php artisan config:clear
Then
php artisan config:cache
Hope this will work.
I am trying to create an event handler using php artisan but it just won't work. It works perfectly with anything else for example event.
This is what I use in the cmd:
php artisan handler:event myhandler
This is the response:
[Symfony\Component\Console\Exception\CommandNotFoundException]
There are no commands defined in the "handler" namespace.
Command handler:event was removed in 5.1, you can't use it anymore.
Maybe you're looking for php artisan event:generate command.
I have been looking in the docs for a solution to make views with basic CURD operations but without much success.
I guess this might be pretty simple, but am missing something or not looking hard enough.
i can make models and controllers using the below artisan commands
php artisan make:model modelName
php artisan make:controller controllerName
But how do we make the basic CURD views. something like
php artisan make:views
cant find any doc for this. Please help
At the time of writing, there isn't a way to create views via artisan without writing your own command or using a third party package. You could write your own as already suggested or use sven/artisan-view.
if you are using laravel 5.1 or 5.2 this gist can help you make:view command just create command copy and paste the code from gist.
Step 1:
php artisan make:command MakeViewCommand
Step 2:
copy class from this gist
https://gist.github.com/umefarooq/ebc617dbf88260db1448
Laravel officially doesn't have any Artisan cammands for views.
But you could add third party plugins like Artisan View
Here's the link Artisan View
After adding this plugin to your project by the guide provided here you should be able to perform following cammands :
Create a view 'index.blade.php' in the default directory
$ php artisan make:view index
Create a view 'index.blade.php' in a subdirectory ('pages')
$ php artisan make:view pages.index
Create a view with a different file extension ('index.html')
$ php artisan make:view index --extension=html
There is very easy way to create a view(blade) file with php artisan make:view {view-name} command using Laravel More Command Package.
First Install Laravel More Command
composer require theanik/laravel-more-command --dev
Then Run
php artisan make:view {view-name}
For example
It create index.blade.php in resource/views directory
php artisan make:view index
It create index.blade.php in resource/views/user directory
php artisan make:view user/index
Thank you.
In v5.4 you need to create the command with:
php artisan make:command MakeView
and before you can use it, it must be registered in App/Console/Kernel like
protected $commands = [
Commands\MakeView::class
];
then you make a view like: php artisan make:view posts/create
To create a view (blade) file through command in laravel 8:
composer require theanik/laravel-more-command --dev
php artisan make:view abc.blade.php
You can install sven/artisan-view package to make view from CMD, to install package write this command:
composer require sven/artisan-view --dev
After installing it, you can make a single view or folder with all views that contain {index-create-update-show}
To make a single file we using this command:
php artisan make:view Name_of_view
For example
php artisan make:view index
To make a folder that contain all resources index - create - update - show write name of folder that contain all this files for example:
php artisan make:view Name_of_Folder -r
For example:
php artisan make:view blog -r
-r is a shorthand for --resource you can write full name or shorthand to make resource.
you can extend yields from master page if master page inside in directory layouts we write command sith this format
php artisan make:view index --extends=layouts.master --with-yields
layouts is a directory this directory may be with a different name in your project the idea is name_of_folder/master_page that you want to extend yields from it.
For more view docs