I have installed the AIR flash debugger and now when I try testing my movie in flash it takes a long time to load, because of the debug mode, how can I uninstall it?
Downloaded the debugger from the official Adobe website.
If you want uninstall Flash Player debugger, you can't use the usually Windows control panel form but you must download Flash Player Uninstaller so you must run it.
You can see here on the related Adobe help site
EDIT
Try this link where you can find a smart guide about uninstall Adobe Animate CC and the uninstaller file.
Related
I have a Windows 10 64-bit PC (fresh install, not an upgrade).
When I run the setup file (web or offline alike) in order to install Visual Studio (2013 or 2015, Community edition), all I get is a small black rectangle on the screen (which I later found out that this is actually the title of the setup popup window), without the actual window of the installation.
I have tried it also after a reboot, and with various "versions" of the installation files (web, iso, standalone), but it's always the same situation.
What can I do about it? VS is my main development tool and I really need it on this computer as soon as possible.
Similar problem here. Program install ok but display blank screen after launched.
Problem solved when I changed my Nvidia graphics's global 3D setting to integrated graphics.
Right click desktop
Select Nvidia Control Panel
Select Manage 3D Settings
Under preferred graphics processor, select integrated graphics.
Apply.
If you are using a laptop with an external monitor, try unplugging it and using your primary monitor to launch. This worked for me. Laptops often have dual graphics cards and I believe we're hitting some issue with the way the Installer for VS was written (likely WPF)
Once I launced it and started the installation, I could safely plug my monitor in and it kept working properly.
I'm using an AMD GPU, It was a blank white screen but when I hover the mouse over it, I can see the text events
By the way
I went to my AMD Radeon Settings and saw that vs_installershell.exe and vs_setup_bootstrapper.exe were added automatically to the Switchable Graphics list
they were with Not Assigned Option which usually is like High Performace Option
means It would run it with my ATI GPU.
So I clicked on them
Selected Power Saving Option (to work with my Intel GPU)
Which worked and I can see the window of visual studio installer back
after restarting visual studio installer for sure.
whether is your graphics card, just turn on power saving for it.
Had the same issue. Since this topic is not accept any answare, there is one from https://developercommunity.visualstudio.com/content/problem/150888/visual-studio-installer-shows-blank-screen.html
Try to open installer as Admin.
You will probably have blank screen. Do not close it!
Open installer once more.
Hope it help other people with same issue.
the same thing happened to me, i didn't do anything i just waited for it and it started showing it's status, i suggest you close other running programs to avoid conflicts and performance hindering, and try it again.
This seems like a very shoddy issue. I've run into this problem too, and I tested all solutions that I came across online. These all work:
Running the installer as administrator, which is a blank screen. Leave it open and run a second instance of the installer, which will not be blank (doesn't need to be run as administrator the second time.
Changing screen settings so that the laptop screen is not being used.
Downloading the AMD Settings application, and setting vs_installershell.exe to run on powersaving mode. Restart the installer after saving the settings.
Use a default graphics driver instead of the AMD one.
I had the the same problem in my laptop. The temporary solution is: start the installer only without the battery, if installer starts you can connect the cable, it works fine.
I had to run integrated graphics rather than my Nvdia. That solved it for me.
Remember to change it back when programming in OpenGL and DirectX otherwise you may get a list of messages staying that nothing works.
I had the the same problem in my laptop. The work around is, in device management, remove the amd graphics or start the installer only with battery.
This issue is driving me crazy. I'm on a corporately controlled network but have local administrator rights. This issue is happening with all versions of Visual Studio installer where you initiate the install, then you see the initial splash screen and then that vanishes and it looks like nothing is there. But if you click and drag that area you can see the window borders during the drag. Some portions of the invisible window even respond to mouse clicks. There's even a task bar indication that is blank when you hover over it. I can't even update the current 2013 installation to SP5 because even that window behaves the same way.
However, it just totally hangs the install and since I can't see the install options I don't know if there's a failure or it's just waiting on me to do something.
I've seen several posts about this outside of here but all of them lead to a dead-end.
I have installed Studio on this machine before - actually all versions since 2005 and never have seen this issue until it started about 2 months ago. I did updates galore and all that. Updated my video drivers, blah, blah, blah. I've even tried remoting into this this box and seeing if that would alter the display enough to see what is going on...all to no avail.
The box is beefy (i5, 16GB, 500GB SSD...triple display, etc...) so it more than meets the requirements.
When I try to install any version of Visual Studio, the install window briefly appears and then disappears. However, it is still there, just 100% transparent. Has anyone else seen this before?
I was able to finally find an answer to the invisible install dialog question, it is however not an adequate solution, but an answer. I have to run only one monitor then the install dialog is visible and things proceed normally.
My solution was to disable the graphics card I have on my computer and run on onboard graphics card. It seems that the issue is with the graphics, so forcing the system to use the "regular" graphics card did the trick.
I have to use /Full /Passive from the command line to install on a build server. I would prefer less flashy installer for a more robust one. I am sure its a combination of the graphics card etc. But other installers work.
Flash CS6 won't display any AS3 projects while debugging anymore. When compiling for debugging it turns up white in the default "debug window" inside of Flash. If I right-click in the debugger window it says "Movie not loaded". No compiler errors are shown. The resulting swf file only runs if opened with the Flash Player from Finder.
This applies for all projects that I know have been working fine up until now. I've also tested to create a new, blank FLA on which I only draw a rectangle with the same result.
If, however, I select a Flash Player version prior to 10 (falling back to AS2) as the target for the test file containing only a rectangle, it does compile and show up fine.
I've uninstalled Flash and Flash Builder (and deleting any trace of the applications in the Library folders) and then reinstalled it multiple times without any result. I've also tried to uninstall Flash Player and Flash Player Debugger to no avail. For this I'm following the advice on Adobe's site and are using their Flash Player uninstaller applications, but it doesn't seem to uninstall all instances of the Players...
I believe the problem lies in the version of Flash Player Debugger that Flash uses internally to display the swf when debugging and it seems to somehow persist between re-installations. Is there a sure-shot way to reset this entirely?
Has anybody encountered this problem before?
I finally found the problem myself. It seems like the Chrome extension called FlashFirebug randomly causes these issues. When I deactivated the extension Flash started working properly again.
I am facing an interface freeze issue with Flash Projector running a flex state based application. A Flash Projector exe was generated from a standalone flash player ver 10.2. The target machine on which the problem occuresd has 10.3.
Basically "screen freeze" means that the user interface is running as usual on Flash Player, but it's not responding to any user input (like button presses). But if we alt-tab to another application, the state changes in the Flash player. There is display with buttons on the screen, but touching the buttons or doing anything else - it did not respond. Rebooting the computer fixes the problem.
Can you suggest why this is happening? Is there any known bug in Flash Player.
The problem is this is being hard to reproduce on the developer workstation as it doesn't happen always. But it happens quite often on the target machine running an Intel Atom N270. What debugging steps can you suggest?
Problem : http://www.youtube.com/watch?v=z25oV9QWRyk
Have you tried publishing the projector in 10.1 or a version of Flash newer than 10.2? If you are able to publish it as a SWF first, you can use the stand-alone projector exe (downloadable here) to load and create a projector from it.
According to this Adobe bug issue (registration required), version 10.1 was supposed to have resolved this, but it sounds like it may have reappeared in 10.2.
Im using flex 4
While running a application i got this error
Flash Builder cannot locate the required version of Adobe Flash
Player. You might need to install the Flash Player or reinstall Flash
Builder.
Which version flash player required for flex 4.0?
Problem solved...I have clicked Link 'flash player downloads' on the error message then downloaded and installed Flash Player 10.3
It works for me.
Have a look at this thread at Adobe Forums - http://forums.adobe.com/thread/606832
The above thread is about the exact error message.
In all there are following things suggested in the thread.
1.
Associate the Flash Debug player as the standalone player with SWF
files.
2.
To use HTML wrapper, just right click on your project and select
'properties'. Select 'Actionscript Compiler' on the left column, and
in the resulting properties pane on the right, check the option for
'Generate HTML Wrapper File'. That should force FB to launch the web
browser for debug. This will require the ActiveX or Mozilla flash
debug player, depending on which browser you're using for debugging.
3.
I did a search in the registry and found two instances where Flex was referrenced rather that Flash builder changing this to flash builder seemed to eliminate the problem.