check="a1++"
awk -F":" -v name="$check" 'tolower($2)~ tolower(name)' file.txt
It seems that there are some issue with awk when working with a string of "++". It unable to retrieve the value in the file. However,I have tried to change check="44b" it seems to be working perfectly fine
apple:44b:Vietnam
orange:A1++ approved:China
jelly:-34:Malaysia
pear:98:Malaysia
file.txt
As Glenn Jackman mentioned in comments, you should be using index vs ~ since + is a regex metacharacter.
If you use ++ then orange:A123 approved:China would also match...
You can do:
$ awk -F: -v name="$check" 'index(tolower($2), tolower(name))' file
this works on my awk but don't use since the right hand side is treated as regex and special characters will take over. If regex match is not intended, substring match with index is better as in the other answer.
$ check="a1++"; awk -F: -v name="$check" 'tolower($2)~tolower(name)' file
orange:A1++:China
check your awk version, perhaps it's broken
or with the other input
$ check="a1++"; awk -F: -v name="$check" 'tolower($2)~tolower(name)' file
orange:A1++ approved:China
will match as expected, note that "name" is on the right hand side of the regex match and "$2" is on the left.
Related
I'm on a Mac, and I want to find a field in a CSV file adjacent to a search string
This is going to be a single file with a hard path; here's a sample of it:
84:a5:7e:6c:a6:b0, AP-ATC-151g84
84:a5:7e:6c:a6:b1, AP-A88-131g84
84:a5:7e:73:10:32, AP-AG7-133g56
84:a5:7e:73:10:30, AP-ADC-152g81
84:a5:7e:73:10:31, AP-D78-152e80
so if my search string is "84:a5:7e:73:10:32"
I want to get returned "AP-AG7-133g56"
I had been working within an Applescript, but maybe a shell script will do.
I just need the proper syntax for opening the file and having awk search it. Again, I'm weak conceptually on how shell commands run, how they must be executed, etc
This errors, gives me ("command not found"):
set the_file to "/Users/Paw/Desktop/AP-Decoder 3.app/Contents/Resources/BSSIDtable.csv"
set the_val to "70:56:81:cb:a2:dc"
do shell script "'awk $1 ~ the_val {print $2} the_file'"
Thank you for coddling me...
This is a relatively simple:
awk '$1 == "70:56:81:cb:a2:dc," {print "The answer is "$2}' 'BSSIDtable.csv'
(the "The answer is " text can be omitted if you only wish to see only the data, but this shows you how to get more user-friendly output if desired).
The comma is included since awk uses white space for separators so the comma becomes part of column 1.
If the thing you're looking for is in a shell variable, you can use -v to provide that to awk as an awk variable:
lookfor="70:56:81:cb:a2:dc,"
awk -v mac=$lookfor '$1 == mac {print "The answer is "$2}' 'BSSIDtable.csv'
As an aside, your AppleScript solution is probably not working because the $1/$2 are being interpreted as shell variable rather than awk variables. If you insist on using AppleScript, you will have to figure out how to construct a shell command that quotes the awk commands correctly.
My advice is to just use the shell directly, the number of people proficient in that almost certainly far outnumber those proficient in AppleScript :-)
if sed is available (normaly on mac, event if not tagged in OP)
simple but read all the file
sed -n 's/84:a5:7e:73:10:32,[[:blank:]]*//p' YourFile
quit after first occurence (so average of 50% faster on huge file)
sed -n -e '/84:a5:7e:73:10:32,[[:blank:]]*/!b' -e 's///p;q' YourFile
awk
awk '/^84:a5:7e:73:10:32/ {print $2}'
# OR using a variable for batch interaction
awk -v Src='84:a5:7e:73:10:32' '$1 == Src {print $2}'
# OR assuming that case is unknow
awk -v Src='84:a5:7e:73:10:32' 'BEGIN{IGNORECASE=1} $1 == Src {print $2}'
by default it take $0 as compare test if a regex is present, just add the ^ to take first field content
I am trying to separate RECORDS of a file based on the string, "//".
What I've tried is:
awk -v RS="//" '{ print "******************************************\n\n"$0 }' myFile.gb
Where the "******" etc, is just a trace to show me that the record is split.
However, the file also contains / (by themselves) and my trace, ****** is being printed there as well meaning that awk is interpreting those also as my record separator.
How can I get awk to only split records on // ????
UPDATE: I am running on Unix (the one that comes with OS X)
I found a temporary solution, being:
sed s/"\/\/"/"*"/g | awk -v RS="*" ...
But there must be a better way, especially with massive files that I am working with.
On a Mac, awk version 20070501 does not support multi-character RS. Here's an illustration using such an awk, and a comparison (on the same machine) with gawk:
$ /usr/bin/awk --version
awk version 20070501
$ /usr/bin/awk -v RS="//" '{print NR ":" $0}' <<< x//y//z
1:x
2:
3:y
4:
5:z
$ gawk -v RS="//" '{print NR ":" $0}' <<< x//y//z
1:x
2:y
3:z
If you cannot find a suitable awk, then pick a better character than *. For example, if tabs are acceptable, and if your shell supports $'...', then you could use this incantation of sed:
sed $'s,//,\t,g'
I have a file with the following text (multiple lines with different values):
TokenRange(start_token:8050285221437500528,end_token:8051783269940793406,...
I want to extract the value of start_token and end_token. I tried awk and cut, but I am not able to figure out the best way to extract the targeted values.
Something like:
cat filename| get the values of start_token and end_token
grep -oP '(?<=token:)\d+' filename
Explanation:
-o: print only part that matches, not complete line
-P: use Perl regex engine (for look-around)
(?<=token:): positive look-behind – zero-width pattern
\d+: one or more digits
Result:
8050285221437500528
8051783269940793406
A (potentially more efficient) variant of this, as pointed out by hek2mgl in his comment, uses \K, the variable-width look-behind:
grep -oP 'token:\K\d+'
\K keeps everything that has been matched to the left of it, but does not include it in the match (see perlre).
Using awk:
awk -F '[(:,]' '{print $3, $5}' file
8050285221437500528 8051783269940793406
First value is start_token and last value is end_token.
a sed version
sed -e '/^TokenRange(/!d' -e 's/.*:\([0-9]*\),.*:\([0-9]*\),.*/\1 \2/' YourFile
I wish to use a string (BIRCH) as a field delimiter in awk to print second field. I am trying the following command:
cat tmp.log|awk -FBirch '{ print $2}'
Below output is getting printed:
irch2014/06/23,04:36:45,3,1401503,xml-harlan,P12345-1,temp,0a653356353635635,temp,L,Success
Desired output:
2014/06/23,04:36:45,3,1401503,xml-harlan,P12345-1,temp,0a653356353635635,temp,L,Success
Contents of tmp.log file.
-bash-3.2# cat tmp.log
Dec 05 13:49:23 [x.x.x.x.180.100] business-log-dev/int [TEST][0x80000001][business-log][info] mpgw(Test): trans(8497187)[request][10.x.x.x]:
Birch2014/06/23,04:36:45,3,1401503,xml-harlan,P12345-1,temp,0a653356353635635,temp,L,Success
Am I doing something wrong?
OS: Solaris10
Shell: Bash
Tried below command suggested in one of the ansers below. I am getting the desired output, but with an extra empty line at the top. How can this be eliminated from the output?
-bash-3.2# /usr/xpg4/bin/awk -FBirch '{print $2}' tmp.log
2014/06/23,04:36:45,3,1401503,xml-harlan,P12345-1,temp,0a653356353635635,temp,L,Success
Originally, I suggested putting quotes around "Birch" (-F'Birch') but actually, I don't think that should make any difference.
I'm not at all experienced working with Solaris but you may want to also try using nawk ("new awk") instead of awk.
nawk -FBirch '{print $2}' file
If this works, you may want to consider creating an alias so that you always use the newer version of awk with more features.
You may also want to try using the version of awk in the /usr/xpg4/bin directory, which is a POSIX compliant implementation so should support multi-character FS:
/usr/xpg4/bin/awk -FBirch '{print $2}' file
If you only want to print lines which have more than one field, you can add a condition:
/usr/xpg4/bin/awk -FBirch 'NF>1{print $2}' file
This only prints the second field when there is more than one field.
From the man page of the default awk on solaris usr/bin/awk
-Fc Uses the character c as the field separator
(FS) character. See the discussion of FS
below.
As you can see solaris awk only takes a single character as a Field separator
Also in the man page is split
split(s, a, fs)
Split the string s into array elements a[1], a[2], ...
a[n], and returns n. The separation is done with the
regular expression fs or with the field separator FS if
fs is not given.
As you can see here it takes a regular expression as a separator so we can use.
awk 'split($0,a,"Birch"){print a[2]}' file
To print the second field split by Birch
I have a file with fields separated by pipe characters and I want to print only the second field. This attempt fails:
$ cat file | awk -F| '{print $2}'
awk: syntax error near line 1
awk: bailing out near line 1
bash: {print $2}: command not found
Is there a way to do this?
Or just use one command:
cut -d '|' -f FIELDNUMBER
The key point here is that the pipe character (|) must be escaped to the shell. Use "\|" or "'|'" to protect it from shell interpertation and allow it to be passed to awk on the command line.
Reading the comments I see that the original poster presents a simplified version of the original problem which involved filtering file before selecting and printing the fields. A pass through grep was used and the result piped into awk for field selection. That accounts for the wholly unnecessary cat file that appears in the question (it replaces the grep <pattern> file).
Fine, that will work. However, awk is largely a pattern matching tool on its own, and can be trusted to find and work on the matching lines without needing to invoke grep. Use something like:
awk -F\| '/<pattern>/{print $2;}{next;}' file
The /<pattern>/ bit tells awk to perform the action that follows on lines that match <pattern>.
The lost-looking {next;} is a default action skipping to the next line in the input. It does not seem to be necessary, but I have this habit from long ago...
The pipe character needs to be escaped so that the shell doesn't interpret it. A simple solution:
$ awk -F\| '{print $2}' file
Another choice would be to quote the character:
$ awk -F'|' '{print $2}' file
Another way using awk
awk 'BEGIN { FS = "|" } ; { print $2 }'
And 'file' contains no pipe symbols, so it prints nothing. You should either use 'cat file' or simply list the file after the awk program.