I am trying to put some basic query in hive editor in hue browser , but it is returning the following error whereas my Hivecli works fine and able to execute queries. Could someone help me?
Fetching results ran into the following error(s):
Bad status for request TFetchResultsReq(fetchType=1,
operationHandle=TOperationHandle(hasResultSet=True,
modifiedRowCount=None, operationType=0,
operationId=THandleIdentifier(secret='r\t\x80\xac\x1a\xa0K\xf8\xa4\xa0\x85?\x03!\x88\xa9',
guid='\x852\x0c\x87b\x7fJ\xe2\x9f\xee\x00\xc9\xeeo\x06\xbc')),
orientation=4, maxRows=-1):
TFetchResultsResp(status=TStatus(errorCode=0, errorMessage="Couldn't
find log associated with operation handle: OperationHandle
[opType=EXECUTE_STATEMENT,
getHandleIdentifier()=85320c87-627f-4ae2-9fee-00c9ee6f06bc]",
sqlState=None,
infoMessages=["*org.apache.hive.service.cli.HiveSQLException:Couldn't
find log associated with operation handle: OperationHandle
[opType=EXECUTE_STATEMENT,
getHandleIdentifier()=85320c87-627f-4ae2-9fee-00c9ee6f06bc]:24:23",
'org.apache.hive.service.cli.operation.OperationManager:getOperationLogRowSet:OperationManager.java:229',
'org.apache.hive.service.cli.session.HiveSessionImpl:fetchResults:HiveSessionImpl.java:687',
'sun.reflect.GeneratedMethodAccessor14:invoke::-1',
'sun.reflect.DelegatingMethodAccessorImpl:invoke:DelegatingMethodAccessorImpl.java:43',
'java.lang.reflect.Method:invoke:Method.java:606',
'org.apache.hive.service.cli.session.HiveSessionProxy:invoke:HiveSessionProxy.java:78',
'org.apache.hive.service.cli.session.HiveSessionProxy:access$000:HiveSessionProxy.java:36',
'org.apache.hive.service.cli.session.HiveSessionProxy$1:run:HiveSessionProxy.java:63',
'java.security.AccessController:doPrivileged:AccessController.java:-2',
'javax.security.auth.Subject:doAs:Subject.java:415',
'org.apache.hadoop.security.UserGroupInformation:doAs:UserGroupInformation.java:1657',
'org.apache.hive.service.cli.session.HiveSessionProxy:invoke:HiveSessionProxy.java:59',
'com.sun.proxy.$Proxy19:fetchResults::-1',
'org.apache.hive.service.cli.CLIService:fetchResults:CLIService.java:454',
'org.apache.hive.service.cli.thrift.ThriftCLIService:FetchResults:ThriftCLIService.java:672',
'org.apache.hive.service.cli.thrift.TCLIService$Processor$FetchResults:getResult:TCLIService.java:1553',
'org.apache.hive.service.cli.thrift.TCLIService$Processor$FetchResults:getResult:TCLIService.java:1538',
'org.apache.thrift.ProcessFunction:process:ProcessFunction.java:39',
'org.apache.thrift.TBaseProcessor:process:TBaseProcessor.java:39',
'org.apache.hive.service.auth.TSetIpAddressProcessor:process:TSetIpAddressProcessor.java:56',
'org.apache.thrift.server.TThreadPoolServer$WorkerProcess:run:TThreadPoolServer.java:285',
'java.util.concurrent.ThreadPoolExecutor:runWorker:ThreadPoolExecutor.java:1145',
'java.util.concurrent.ThreadPoolExecutor$Worker:run:ThreadPoolExecutor.java:615',
'java.lang.Thread:run:Thread.java:745'], statusCode=3), results=None,
hasMoreRows=None)
This error could be either due to HiveServer2 not running or Hue does not have access to hive_conf_dir.
Check whether the HiveServer2 has been started and is running. It uses the port 10000 by default.
netstat -ntpl | grep 10000
If it is not running, start the HiveServer2
$HIVE_HOME/bin/hiveserver2
Also check the Hue configuration file hue.ini. The hive_conf_dir property must be set under [beeswax] section. If not set, add this property under [beeswax]
hive_conf_dir=$HIVE_HOME/conf
Restart supervisor after making these changes.
Related
getting below error while starting the database:-
startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/mis/PARAMETERFILE/spfile.276.967375255'
ORA-17503: ksfdopn:10 Failed to open file +DATA/mis/PARAMETERFILE/spfile.276.967375255
ORA-04031: unable to allocate 56 bytes of shared memory ("shared pool","unknown object","KKSSP^24","kglseshtSegs")
Your database cannot find the SPFILE (newer init.ora) within ASM with the actual system parameters or has no permissions to access it.
Either your Grid Infrastructure stack or the dbs/spfile.ora is pointing to the wrong file.
To find out what the grid infrastructure stack is using, run "srvctl" which should display the parameterfile name the database should be using
srvctl config database -d <dbname>
...
Spfile: +DATA/<dbname>/PARAMETERFILE/spfile.269.1066152225
...
Then check (as the grid user), if the file indeed is not visible (by using asmcmd):
asmcmd
ASMCMD> ls +DATA/<dbname>/PARAMETERFILE/
spfile.269.1066152225
If the name is different, then you got the issue... (and you have to point to the correct file).
If the name is correct, then it could be wrong permissions on the oracle executable(s) (check My Oracle Support):
RAC Database Can't Start: ORA-01565, ORA-17503: ksfdopn:10 Failed to open file +DATA/BPBL/spfileBPBL.ora (Doc ID 2316088.1)
My python version is 3.7, and after I ran pip3 install happybase, I started the command hbase thrift start and tried to write a brief .py file as following:
import happybase
connection = happybase.Connection('master')
table = connection.table('jmlr') #'jmlr' is a table in hbase
for i in table.scan():
print(i)
table.put('001', {'title':'dasds'}) #error here
connection.close()
When it's about to run table.put(), it reported such an error:
thriftpy2.transport.base.TTransportException: TTransportException(type=4, message='TSocket read 0 bytes')
And at the same time, the thrift reported an error:
ERROR [thrift-worker-1] thrift.TBoundedThreadPoolServer: Error occurred during processing of message. java.lang.IllegalArgumentException: Invalid famAndQf provided.
But just now I ran this python file again, it gave me a different error in thrift:
thrift.TBoundedThreadPoolServer: Thrift error occurred during processing of message.
org.apache.thrift.protocol.TProtocolException: Bad version in readMessageBegin
I have tried to add parameters like protocol='compact', transport='framed', but this didn't work, even the table.scan() failed.
Everything in the hbase shell is OK, so I can't figure out what went wrong, I'm about to collapse.
I ran into the same issue and found this sollution. You need to add even empty Column Qualifier ( ':' symbol as delimiter between Column Family and Column Qualifier) into put() method:
table.put('001:', {'title':'dasds'})
Also, you have a different error message after second run of script because thrift server is already failed.
I hope it will help you.
I am running hive sql on yarn,
it's throwing error with join condition , I am able to create External as well as internal table but failed to create table when use command
create table as AS SELECT name from student.
when running same query through hive cli it's working fine but with spring jog it throws error
2016-03-28 04:26:50,692 [Thread-17] WARN
org.apache.hadoop.hive.shims.HadoopShimsSecure - Can't fetch tasklog:
TaskLogServlet is not supported in MR2 mode.
Task with the most failures(4):
-----
Task ID:
task_1458863269455_90083_m_000638
-----
Diagnostic Messages for this Task:
AttemptID:attempt_1458863269455_90083_m_000638_3 Timed out after 1 secs
2016-03-28 04:26:50,842 [main] INFO
org.apache.hadoop.yarn.client.api.impl.YarnClientImpl - Killed application
application_1458863269455_90083
2016-03-28 04:26:50,849 [main] ERROR com.mapr.fs.MapRFileSystem - Failed to
delete path maprfs:/home/pro/amit/warehouse/scratdir/hive_2016-03-28_04-
24-32_038_8553676376881087939-1/_task_tmp.-mr-10003, error: No such file or
directory (2)
2016-03-28 04:26:50,852 [main] ERROR org.apache.hadoop.hive.ql.Driver -
FAILED: Execution Error, return code 2 from
As per my findings I think there is some issue with scratdir.
Kindly suggest if any one face same issue.
This issue occurs if the recursive directory doesnot exist. Hive doesnt automatically create directories recursively.
Please check existence of directories to child\table level from root
I faced a similar issue while running the below Hive query
select * from <db_name>.<internal_tbl_name> where <field_name_of_double_type> in (<list_of_double_values>) order by <list_of_order_fields> limit 10;
I performed an explain on the above statement and below was the result.
fs.FileUtil: Failed to delete file or dir [/hdfs/Hadoop_Misc_Logs/Edge01/local_scratch/<hive_username>/41289638-cd53-4d4b-88c9-3359e9ec99e2/hive_2017-05-08_04-26-36_658_6626096693992380903-1/.nfs0000000057b93e2d00001590]: it still exists.
2017-05-08 04:26:37,969 WARN [41289638-cd53-4d4b-88c9-3359e9ec99e2 main] fs.FileUtil: Failed to delete file or dir [/hdfs/Hadoop_Misc_Logs/Edge01/local_scratch/<hive_username>/41289638-cd53-4d4b-88c9-3359e9ec99e2/hive_2017-05-08_04-26-36_658_6626096693992380903-1/.nfs0000000057b93e2700001591]: it still exists.
Time taken: 0.886 seconds, Fetched: 24 row(s)
And checked the logs through
yarn logs -applicationID application_1458863269455_90083
The error happened after a MapR upgrade from the admin team. It is probably due to some upgrade or installation issue and Tez configurations (as suggested by the line 873 in log below). Or probably, the Hive query is syntactically not supporting the Tez optimization. Saying so, because another Hive query on an external table is running fine in my case. Have to check a bit deeper though.
Though not sure but the error line in the logs that looks to be most relevant is as follows:
2017-05-08 00:01:47,873 [ERROR] [main] |web.WebUIService|: Tez UI History URL is not set
Solution:
It is probably happening due to some open files or applications that are using some resources. Pls check https://unix.stackexchange.com/questions/11238/how-to-get-over-device-or-resource-busy
You can run the explain <your_Hive_statement>
In the result execution plan, you can come across the filenames/dirs that Hive execution engine fails to delete e.g.
2017-05-08 04:26:37,969 WARN [41289638-cd53-4d4b-88c9-3359e9ec99e2 main] fs.FileUtil: Failed to delete file or dir [/hdfs/Hadoop_Misc_Logs/Edge01/local_scratch/<hive_username>/41289638-cd53-4d4b-88c9-3359e9ec99e2/hive_2017-05-08_04-26-36_658_6626096693992380903-1/.nfs0000000057b93e2d00001590]: it still exists.
Go to the path given in the step 2 e.g. /hdfs/Hadoop_Misc_Logs/Edge01/local_scratch/<hive_username>/41289638-cd53-4d4b-88c9-3359e9ec99e2/hive_2017-05-08_04-26-36_658_6626096693992380903-1/
In path 3, doing ls -a or lsof +D /path will show the open process_ids blocking the files from delete.
If you run ps -ef | grep <pid>, you get
hive_username <pid> 19463 1 05:19 pts/8 00:00:35 /opt/mapr/tools/jdk1.7.0_51/jre/bin/java -Xmx256m -Dhiveserver2.auth=PAM -Dhiveserver2.authentication.pam.services=login -Dmapr_sec_enabled=true -Dhadoop.login=maprsasl -Djava.net.preferIPv4Stack=true -Dhadoop.log.dir=/opt/mapr/hadoop/hadoop-2.7.0/logs -Dhadoop.log.file=hadoop.log -Dhadoop.home.dir=/opt/mapr/hadoop/hadoop-2.7.0 -Dhadoop.id.str=hive_username -Dhadoop.root.logger=INFO,console -Djava.library.path=/opt/mapr/hadoop/hadoop-2.7.0/lib/native -Dhadoop.policy.file=hadoop-policy.xml -Djava.net.preferIPv4Stack=true -Xmx512m -Dlog4j.configurationFile=hive-log4j2.properties -Dlog4j.configurationFile=hive-log4j2.properties -Djava.util.logging.config.file=/opt/mapr/hive/hive-2.1/bin/../conf/parquet-logging.properties -Dhadoop.security.logger=INFO,NullAppender -Djava.security.auth.login.config=/opt/mapr/conf/mapr.login.conf -Dzookeeper.saslprovider=com.mapr.security.maprsasl.MaprSaslProvider -Djavax.net.ssl.trustStore=/opt/mapr/conf/ssl_truststore org.apache.hadoop.util.RunJar /opt/mapr/hive/hive-2.1//lib/hive-cli-2.1.1-mapr-1703.jar org.apache.hadoop.hive.cli.CliDriver
CONCLUSION:
The HiveCLiDriver clearly shows that running "Hive on Spark" (or managed) tables through Hive CLI is not supported any more from Hive 2.0 onwards and it is going to be deprecated going forward. You have to use HiveContext in Spark for running Hive queries. But you can still run queries on Hive external tables through Hive CLI.
Does anyone know about HPCC/HDFS connector.we are using both HPCC and HADOOP.There is one utility(HPCC/HDFS connector) developed by HPCC which allows HPCC cluster to acess HDFS data
i have installed the connector but when i run the program to acess data from hdfs it gives error as libhdfs.so.0 doesn't exist.
I tried to build libhdfs.so using command
ant compile-libhdfs -Dlibhdfs=1
its giving me error as
target "compile-libhdfs" does not exist in the project "hadoop"
i used one more command
ant compile-c++-libhdfs -Dlibhdfs=1
its giving error as
ivy-download:
[get] Getting: http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar
[get] To: /home/hadoop/hadoop-0.20.203.0/ivy/ivy-2.1.0.jar
[get] Error getting http://repo2.maven.org/maven2/org/apache/ivy/ivy/2.1.0/ivy-2.1.0.jar
to /home/hadoop/hadoop-0.20.203.0/ivy/ivy-2.1.0.jar
BUILD FAILED java.net.ConnectException: Connection timed out
any suggestion will be a great help
Chhaya, you might not need to build libhdfs.so, depending on how you installed hadoop, you might already have it.
Check in HADOOP_LOCATION/c++/Linux-<arch>/lib/libhdfs.so, where HADOOP_LOCATION is your hadoop install location, and arch is the machine’s architecture (i386-32 or amd64-64).
Once you locate the lib, make sure the H2H connector is configured correctly (see page 4 here).
It's just a matter of updating the HADOOP_LOCATION var in the config file:
/opt/HPCCSystems/hdfsconnector.conf
good luck.
I have one query. It is executing fine on Hive CLI and returning the result. But when I am executing it with the help of Hive JDBC, I am getting an error below:
java.sql.SQLException: Query returned non-zero code: 9, cause: FAILED: Execution Error, return code 2 from org.apache.hadoop.hive.ql.exec.MapRedTask
at org.apache.hadoop.hive.jdbc.HiveStatement.executeQuery(HiveStatement.java:192)
What is the problem? Also I am starting the Hive Thrift Server through Shell Script. (I have written a shell script which has command to start Hive Thrift Server) Later I decided to start Hive thrift Server manually by typing command as:
hadoop#ubuntu:~/hive-0.7.1$ bin/hive --service hiveserver
Starting Hive Thrift Server
org.apache.thrift.transport.TTransportException: Could not create ServerSocket on address 0.0.0.0/0.0.0.0:10000.
at org.apache.thrift.transport.TServerSocket.<init>(TServerSocket.java:99)
at org.apache.thrift.transport.TServerSocket.<init>(TServerSocket.java:80)
at org.apache.thrift.transport.TServerSocket.<init>(TServerSocket.java:73)
at org.apache.hadoop.hive.service.HiveServer.main(HiveServer.java:384)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.hadoop.util.RunJar.main(RunJar.java:186)
hadoop#ubuntu:~/hive-0.7.1$
Please help me out from this.
Thanks
For this error :
java.sql.SQLException: Query returned non-zero code: 9, cause: FAILED: Execution Error, return code 2 from org.apache.hadoop.hive.ql.exec.MapRedTask
at org.apache.hadoop.hive.jdbc.HiveStatement.executeQuer
Go to this link :
http://docs.amazonwebservices.com/ElasticMapReduce/latest/DeveloperGuide/UsingEMR_Hive.html
and add
**hadoop-0.20-core.jar
hive/lib/hive-exec-0.7.1.jar
hive/lib/hive-jdbc-0.7.1.jar
hive/lib/hive-metastore-0.7.1.jar
hive/lib/hive-service-0.7.1.jar
hive/lib/libfb303.jar
lib/commons-logging-1.0.4.jar
slf4j-api-1.6.1.jar
slf4j-log4j12-1.6.1.jar**
to the class path of your project , add this jars from the lib of hadoop and hive, and try the code. and also add the path of hadoop, hive, and hbase(if your are using) lib folder path to the project class path, like you have added the jars.
and for the second error you got
type
**netstat -nl | grep 10000**
if it shows something means hive server is already running. the second error comes only when the port you are specifying is already acquired by some other process, by default server port is 10000 so very with the above netstat command which i said.
Note : suppose you have connected using code exit from ... bin/hive of if you are connected through bin/hive > then code will not connect because i think (not sure) only one client can connect to the hive server.
do above steps hopefully will solve your problem.
NOTE : exit from cli when you are going to execute the code, and dont start cli while code is being executing.
Might be some issue with permission, just try some query like "SELECT * FROM " which won't start MR jobs.
Try to paste these property before the codes.
SET hive.exec.dynamic.partition = true;
SET hive.exec.dynamic.partition.mode = nonstrict;
set hive.auto.convert.join = false;
set hive.exec.max.dynamic.partitions=100000;
set hive.exec.max.dynamic.partitions.pernode=10000;