After vagrant halt and vagrant destroy and after a cd && cd .vagrant/boxes && rm -rf ... I've been continuing to see a box.
I've also pruned vagrant cache with command vagrant global-status --prune.
Here the output of vagrant status:
Current machine states:
my-vagrant-api not created (virtualbox)
What I need to do to totally remove Vagrant box from an Host?
Nothing you have to do. It is already deleted.
It is only showing vagrant machine configuration that you defined in Vagrantfile. See the output:
my-vagrant-api not created (virtualbox)
It is saying vagrant machine with name my-vagrant-api is defined in Vagrantfile but not created.
If it is created then it will look like:
vagrant status
Current machine states:
server1 poweroff (virtualbox)
server2 poweroff (virtualbox)
server3 running (virtualbox)
This environment represents multiple VMs. The VMs are all listed
above with their current state. For more information about a specific
VM, run `vagrant status NAME`.
If you don't want this configuration then you can simply delete that Vagrantfile
Related
First, apologies: I'm a newbie.
I've created a very basic Vagrantfile by running Vagrant init. I only made a few changes:
config.vm.box = "generic/fedora28"
config.vm.box_version = "1.8.32"
config.vm.provider "libvirt" do |lv|
lv.memory = "4096"
end
(There are also a few items in my config.vm.provision section).
After running vagrant up , the process gets stuck at
==> default: Waiting for domain to get an IP address...
I'm running this off a Fedora 27 box, which uses version 2.0.2 of the Vagrant package (even though current is 2.1.5).
I've tried adding this line:
config.vm.network "private_network", ip: "192.168.100.101"
but it had no effect.
Can anyone help?
I have a Vagrant File that spins up 4 VMs, of image generic/ubuntu2004 on libvirt kvm, to make a k3s cluster that's accessible on the LAN. (multipass + k3s is only accessible via localhost b/c it doesn't allow easy bridging.)
I ran both of these commands > 50 times
sudo vagrant destroy --force --parallel
sudo vagrant up
On the ~51'st time, I noticed vagrant up got stuck on "Waiting for domain to get an IP address..."
What fixed it for me was sudo reboot. You know the classic have you tried unplugging it and plugging it back in?
Something else to try (I rebooted before trying it)
https://bugzilla.redhat.com/show_bug.cgi?id=1283989
I have two directories under /var/www/html, named vlp1 and vlp2 with Vagrant setup. If I run vagrant up separately in these folders the default local URL is vagrant.local for both. But vagrant.local/ always loads site from vlp1 folder.
As it should be, vagrant global-status shows that I have two virtual machines running under these directories. I require to run both sites side by side and to do this the only option I see is to have separate URLs. I believe there is a way to assign different URLs to different sites but don't have any idea how!
What I need to do to accomplish the above so that my sites run like local.vlp1.com and local.vlp2.com or may be like vagrant.vlp1 and vagrant.vlp2?
According to project instructions I have to keep two sites completely separated in two folders and have to use separate Vagrantfiles.
OS: Ubuntu 14.04 64 bit
Installed VitualBox version: 5.1
Installed Vagrant version: 1:1.9.4
Thank you!
UPDATE
Went through the following steps as advised by Henri:
Step 1:
$ vagrant global-status
Output:
id name provider state directory
------------------------------------------------------------------------
eb9b569 default virtualbox running /var/www/html/vlp1
190608c default virtualbox running /var/www/html/vlp2
Step 2: Did a graceful shutdown on vlp2
$ vagrant halt 190608c
Step 3: Output of vagrant global-status now is
id name provider state directory
-------------------------------------------------------------------------
eb9b569 default virtualbox running /var/www/html/vlp1
190608c default virtualbox poweroff /var/www/html/vlp2
Step 4:
$ sudo gedit /var/www/html/vlp2/Vagrantfile
if CONF['ip'] == "dhcp"
config.vm.network :private_network, type: "dhcp", hostsupdater: "skip"
else
config.vm.network :private_network, ip: "192.168.2.5"
end
Step 5: Re up'd vlp2 machine
$ vagrant up 190608c
Step 6:
$ vagrant global-status now shows both machine are back to running state again.
id name provider state directory
------------------------------------------------------------------------
eb9b569 default virtualbox running /var/www/html/vlp1
190608c default virtualbox running /var/www/html/vlp2
Step 7:
In /etc/hosts added following entry
192.168.2.5 vagrant.vlp2
Finally I tried vagrant.vlp2/ in browser but ended up with the following message:
This site can’t be reached
http://vagrant.vlp2/ is unreachable.
As I understand you're using multiple VM so the easiest in this case is to assign each of the VM a static IP (that must be different) so you do so in Vagrantfile
Vagrant.configure("2") do |config|
...
config.vm.network "private_network", ip: "192.168.10.x"
...
end
and you use another IP for the second VM
Vagrant.configure("2") do |config|
...
config.vm.network "private_network", ip: "192.168.20.y"
...
end
and then you update your /etc/hosts file with the information
192.168.10.x vagrant.vlp1
192.168.20.y vagrant.vlp2
I have a custom vagrant box based on the offcial box ubuntu 16.04.
I simplly run like this to get the packaged box.
vagrant init ubuntu/xenial64; vagrant up --provider virtualbox
vagrant up
vagrant ssh # enter the virtual machine and do some custom change on it
vagrant halt
vagrant package --vagrantfile Vagrantfile --output custom_ubuntu1604.box
and then i copy the file custom_ubuntu1604.box to another directory, i use the box like this:
vagrant box add ubuntu1604base custom_ubuntu1604.box
vagrant init ubuntu1604base
vagrant up # at this point the machine will be stopped at "Started Journal Servie"
my new virtualbox machine base on the new packaged box will stop at:
the screenshot
And finally it timed out:
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within the
configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that Vagrant
had when attempting to connect to the machine. These errors are
usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes. Verify
that authentication configurations are also setup properly, as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
Try to set config.vm.boot_timeout in Vagrantfile more than default e.x.600. From my experience I found out it take a long time at the first time to connecting guest machine.
For example
Vagrant.configure("2") do |config|
config.vm.box = "ubuntu/xenial64"
config.vm.provider "virtualbox"
config.vm.boot_timeout = 600
end
This seems to be common problem:
Lets say i have a project which has Vagrantfile. So i executed "vagrant up" and vagrant machine is up and running. So for so good.
After few days i synced the same project codebase to another location on same machine and tried to execute vagrant up. But this time it failed saying "vagrant cant forward request to this port 8080". This is because another vagrant instance occupied this port 8080.
Now if i want to know from where this vagrant box spin off, how can i do this?
This command will tell you the state of all Vagrant environments:
$ vagrant global-status
If you would stop any machin, you can use:
$ vagrant halt id
When trying to up, provision, or destroy a vagrant machine you need to specify a vm-name (as defined in the vagrantfile) if you only want to effect one machine (e.g. run vagrant up local; vagrant up uatk vagrant up production;) - if you fail to do this then the changes effect all the virtual machines.
Therefore typing "vagrant destroy" rather than "vagrant destroy local" downs all your machines. Is it possible to either:-
a) exclude a virtual machine when no machines are specified
b) force the specifying of a vm-name?
You can specify primary machine in Vagrant, so that when you run Vagrant command without specifying target, it will run on the primary machine and not all the machines in your Vagrantfile.
Marking primary machine is done by by setting the primary flag:
config.vm.define "web", primary: true do |web|
# ...
end
See the Docs for more info.