How do I remap or retask pins in realtek drivers ver. 6.0.1(the latest drivers) in Windows 10?
I know there is something related to registry entries and modifying them, but they just don't apply after a restart. All I wanted to do is just reassign the blue and pink jacks on the back of my computer to be a headphone out and a mic in respectively, currently I have this setup:
Rear Blue: Line-In
Rear Green: Front Speakers
Rear Pink: Mic-In
The front green and front pink are not connected to the motherboard and in the driver settings there is no option besides the BIOS to disable them
I remapped my pins using the registry on Windows 8, but after upgrading to Windows 10, the settings had no effect any more. I found a way to configure it with the Realtek software:
Open Realtek HD Audio Manager (double click icon in tray)
You should see graphics of the pins at the right
Right-click the pin to remap and select first entry in the context menu
Select the desired function
Unfortunately, all settings are lost after a reboot. Maybe it is just an issue on my machine, because I have not done a fresh installation.
https://www.overclock.net/forum/6-intel-motherboards/378475-realtek-hd-audio-manager-universal-jack-retasking-ip35-pro-xe-4.html
It can't be done, anymore, without going back an older driver. The driver simply resets the values every time it is initialized.
Related
I don't know anywhere else to ask this. radio.garden is an aggregator of online streaming radio stations. In windows 10 on various machines, it shows a volume slider beside the play/pause controls. With the same version of firefox on windows 10, and still after upgrading to windows 11, the volume control doesn't show on microsoft surface. I have deleted display and audio drivers and let them update, and I have turned firefox hardware acceleration settings off (even though the settings indicates that it is only for graphics). I have also verified that microsoft edge also does not display the volume control.
What do I need to check next to figure out what's going on? I assume the browsers are using some api that perhaps I have blocked via privacy settings that aren't applicable on desktop or something, or maybe provided by some audio drivers and not others?
I connect a MacBook through a 3.5mm jack cable to another computer's line in input jack in the motherboard which has Realtek Audio (Windows). This enables me to use a pair of speakers connected to this last PC and hear both mac and pc through the same speakers simultaneously.
I used to be able to go the Speaker Properties panel and unmute the Rear Input. This way it uses direct monitoring so you don't experience any latency on the macbook's playback.
Some time ago a driver update seems to have removed the Level fader of the inputs together with its mute toggle :O
Now, to achieve the same, I'm only left with this option which introduces latency in the audio playback:
Enabling Listen to this device in the Rear input Recording properties.
So is there another way to regain this functionality?
Is there something like what's suggested in this other question?
Unmute audio input (microphone) in OSX programatically
Basically some command to unmute the direct monitoring of the Line In audio input on Windows, or maybe an app that controls the drivers?
Realtek audio console doesn't provide this option :(
Thanks!
I just had the same problem, but it's not because of the driver. The culprit is the new realtek audio control which has removed the lever for audio monitoring level. You have to use an old version of realtek control panel to make it work.
For example try downloading audio drivers for this motherboard
https://www.asrock.com/mb/intel/Z97M%20Pro4/index.la.asp#Download
Unzip it and look for the file RAVCpl64.exe under the Vista64 folder.
Run this and you'll get the good old control panel back! Works like a charm.
I suggest you put a shorcut on your desktop for ease of access.
I just did this and uninstalled the new control panel which sucks.
I wonder why Realtek chose to remove functionality from their software, really bad idea!
I set my tango down for a couple of months while busy with other things. I charged it for a bit, turned it on and saw the red battery icon. I charged it overnight and saw the green battery symbol. I clicked the power button The splash screen came up, said it was installing updates and screen turned off. That evening I tried to turn it on and it wouldn't do anything. Next morning it turned on - splash screen - white screen, off. Now it doesn't do anything at all. I've tried - volume button and power, both volume buttons...nothing. Has anyone else had this problem? Any ideas? Thanks.
On the below instruction. it only diagnose your device for hardware and BSP level problem. Tango Core and Apps related is not included.
To diagnose your device problem. First we need reset your device.
Hard Reset device
Press your device power key for around 8-10 secs.
sometimes you will see the backlight of screen is off.
Diagnose what is going on on your tango devices
2.1 Check basic bootloader function.
Plug in device with a charging usb cables.
2.1.1 if your device is out of power.
It will show red battery icon. or green icon which you device still enough battery to boot it up.
2.1.2 if your device is not any icon pop up.
Try 1 step again. or
switch different Usb cables and chargers or charging docks.
If it still doesn't work.It is possible a hardware issues now. you may need to contact project-tango-help#google.com
2.1.3 if you do see the battery icon, but without charging icon on it.
That mean something wrong with your charging cable or devices. Switch different charger and cables. if problem still exists. you may need to contact project-tango-help#google.com
2.2 Check the Software side of the devices
if you can see the icon in 2.1.1, that is good.
Normally on Green icon, you can boot up your device.
2.2.1 after the icon is gone, press the power key are 1-3 secs, device will boot up.
you will see the tango icon and the rolling tango icon as part of booting process.
if you get stuck at this two process forever. it means that there is some problem on booting image on android. please go to section 2.3.
if you can see the Android UI without problem. you are fine.keep a eye on your battery. if it show 50% on charging full. and some weird condition. you may need to contact project-tango-help#google.com for more details.
2.3 Recovery your device by android recovery mode.
if you android system can't boot up successfully, Recovery your device is needed. Remember it will wipe out all your data,and cache. so try to backup your data if possible.
2.3.1 If you device can access by ADB, try : adb reboot recovery
or try below steps:
{ make sure device is off,
press the power key with volume Up and Down key at the same time for around 2-3 seconds, till you see Bootloader menus
you will see
{
Continue
Fastboot protocol
Recovery mode
Reboot
Power off
Force Recovery
}
by using volume Up and Down, and power key you can select the item.
select "Recovery mode"
2.3.2: now you are at Tango android recovery mode.
it will show
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
Using Volume down key for moving, and power key for selecting.
The same step as normal Android recovery step.
1. wipe cache partition
2. wipe data/factory reset
then select reboot system now.
Waiting device to boot up.
2.3.3, If your device is still not good. Google didn't provide the tango image for customer fastbooting the device. you had to contact project-tango-help#google.com for next step.
After installing new Windows8 ultimate OS.
Brightness control keys are not working of my laptop.
My laptop model is TOSHIBA SATELLITE C660D
I search for drivers but not find suitable and working driver for my laptop.
I have the similar issue and have solved it like this
Just right click --> My Device/Mycomputer ---> Manage --->Device Manager
Then find Monitor open Monitor section
And then right click on Generic PnP Monitor and click enable
Then you will be able to use brightness keys in window 10 and 8
I have similar issue with Lenovo Y570. The software for managing fan speed does not wortking properly - it does not manage fan speed. Try to install soft which manages brighetness for windows 7 and compatibility mode.
P.S. Don't forget to create Restore point first.
Try to rollback driver to Windows default driver.
goto Control Panel - Device Manager - Display Devices - Right Click on Intel Graphics - Click on RollBack - Confirm - Ok.
I have a dual monitor setup,
1: a computer monitor connected via vga
2: a samsung lcd tv conntected via dvi->hdim cable
Until yesterday, this setup was working just fine. Today when I booted windows 7, the bios & windows loading ... screen shows up fine on my lcd tv
however, when windows loads and shows my desktop, my TV goes blank, and I only get the desktop on my computer monitor.
When I go to "screen resolution" and "detect", I only see my computer monitor listed.
As far as I know, no new display drivers were installed, I am using nvadia gt300.
Also, since the bios/welcome screen does show up on my TV, I can root out the tv/cable being faulty.
has anyone encountered something similar before ?
I had exactly the same problem. I de- and reinstalled drivers, I deinstalled the 11/18 Windows Update, I turned my monitor off and on again at least a dozen times as did I unplug and replug the HDMI cable - nothing worked.
Then, in an act of despair, I unplugged my monitor's power cable, replugged it and.... here we go again!
HTH!
Chris