I use Sublime Text 3 and Visual Studio 2013, I'd like to know if it's possible and how one would be able to highlight a block of code and move or drag it to the left. This would be the opposite of highlighting a few lines of code and hitting the tab button to shift them to the right. Is it a shortcut, a macro, a simple general thing?
In Sublime Text, you can use the keyboard shortcut Ctrl] to move lines or blocks of text to the right, and Ctrl[ to move to the left.
In windows/linux, the shortcut is Ctrl+[or]
In Mac, the shortcut is Command+[or]
I work on mainframes and don't have much knowledge about windows other than playing warcraft :-) hence pardon me if I ask something nooby/silly.
I have a requirement to enter a particular long-text in the current position of a cursor whenever a shortcut key is pressed.
I am thinking of creating a bat file and assigning a windows keyboard shortcut to the bat file and whenever I have requirement to enter the long text, I press the windows shortcut key
and the long text gets typed in the current position of the cursor.
The current position of the cursor can be in any application, like Excel, Word or notepad or Windows dialog prompts.
Could you please let me know if this is possible and point me where I could get some information about this "technique".
Thanks & Regards,
Vasanth.S
To make a single key combo do what you are asking, you may need another program. You can make a link to a batch file, hook up a shortcut and then use the clip command to copy text from a file onto the clipboard. That would require the shortcut and then a Ctrl+V to paste. The batch file would look like this:
clip < c:\SomeDir\sometext.txt
You might like to look at using a clipboard manager - which saves a history of clipboard entries, can search for an entry, and paste it at the cursor.
Ditto and CLCL are both useful and free - which one you use depends on your windows version.
They are hotkey driven for ease of use, but mouse can be used.
In Visual Studio, when you change the name of a variable, a small red square appears underneath it and when you hover over it, a bigger yellow box appears, and when you click on that an option appears to automatically rename all instances of that variable to the new name. Is there a keyboard shortcut for this? It would be much faster than trying to hover over the tiny red box for half an hour... (if it matters I'm using the C# code editor)
EDIT: I am aware of CTRL+. but is there one where you don't have to press enter afterwards? :-)
F2 displays the Rename dialog box, which allows renaming all references for an identifier.
You can rename variables of this easy ways: Right click -> Rename or Ctrl+R-> Ctrl+R
I'm a NotePad++ user, new to TextMate.
There are some features that I really like in NP++ but couldn't figure out if TextMate support them.
Double click on a variable and have all instances highlighted
View 2 text windows side by side
Drag a file onto another opened Window
For this one, I don't know how to generate a screenshot ;-p. Basically, you can drag a file from Windows Explorer and drop it into NP++ to have it opened.
A lot of long time TextMate users are leaving TextMate land, actually. So, I'm not sure it's the right time to move to TextMate.
Emacs and Vim both do what you want and more. If you can afford the learning curve it's definitely worth it.
As for your question:
View 2 text windows side by side
You can have two or more windows for the same document. Assuming you are in a "project" right-click your file in the drawer and choose Open "foo.ext" in New Window. The two "views" contents are more or less in sync but doing cool things like columnar editing tends to break the syncing.
Due to how Mac OS X manages windows, the new window will probably be too large/too small and/or placed in a less than useful place. I use ShiftIt system wide to manage my windows and in such a case have them the same size side by side.
Double click on a variable and have all instances highlighted
What do you use this for? Is this visual highlight or non-contiguous selection?
Type ctrlw to select the word, then ⌘e to make the word your search term, then ⇧⌘f or Edit > Find > Find in Project… It will show all instances of the search term in another window. You can then "jump" to any occurence and do whatever you want.
If you only want to jump from occurence to occurence, select the word then type ⌘e then ⌘g to jump to the next occurence.
Another way is to type ctrls, a little text field appears at the bottom of your window where you can type a word and see its first occurence selected in real time. Repeatly typing ctrls will cycle through the occurences.
Drag a file onto another opened Window
You can drag & drop a file on TextMate's icon in the Dock. You can also right-click the file and choose Open with TextMate *or Open with…*. If you are in a "project" you can right-click and choose Add Existing Files…. Opening multiple files in TextMate will automatically create a "project" for you.
View 2 text windows side by side
I just tried this and it doesn't seem to recognize this functionality. the only time any sort of "add" icon came up was when I dragged the file into an open document and then released, but that resulted in adding the contents of the file into the document.
I just did a quick google search for "textmate split view" and it still doesn't seem to be supported according to some of the answers i found (one from macromates wiki).
Double click on a variable and have all instances highlighted
This also doesn't seem to be supported. This post suggests using the command + f (find), put the word into find, then command + g to jump to the next instance of that word.
There are definitely some things that can be added to textmate to make it more robust. If you are looking for something similar and are on a windows machine, you should check out e text editor. I loved that editor when I was working on a windows machine - split view is supported, but not sure about the highlighting. One thing that e also beats out textmate is the real time regular expression highlighting.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
Is there a keyboard shortcut for pasting the content of the clipboard into a command prompt window on Windows XP (instead of using the right mouse button)?
The typical Shift+Insert does not seem to work here.
Yes.. but awkward. Link
alt + Space, e, k <-- for copy and
alt + Space, e, p <-- for paste.
I personally use a little AutoHotkey script to remap certain keyboard functions, for the console window (CMD) I use:
; Redefine only when the active window is a console window
#IfWinActive ahk_class ConsoleWindowClass
; Close Command Window with Ctrl+w
$^w::
WinGetTitle sTitle
If (InStr(sTitle, "-")=0) {
Send EXIT{Enter}
} else {
Send ^w
}
return
; Ctrl+up / Down to scroll command window back and forward
^Up::
Send {WheelUp}
return
^Down::
Send {WheelDown}
return
; Paste in command window
^V::
; Spanish menu (Editar->Pegar, I suppose English version is the same, Edit->Paste)
Send !{Space}ep
return
#IfWinActive
Not really programming related, but I found this on Google, there is not a direct keyboard shortcut, but makes it a little quicker.
To enable or disable QuickEdit mode:
Open the MS-DOS program, or the command prompt.
Right-click the title bar and press Properties.
Select the Options tab.
Check or un-check the QuickEdit Mode box.
Press OK.
In the Apply Properties To Shortcut dialog, select the Apply properties to current window only if you wish to change the QuickEdit setting for this session of this window only, or select Modify shortcut that started this window to change the QuickEdit setting for all future invocations of the command prompt, or MS-DOS program.
To Copy text when QuickEdit is enabled:
Click and drag the mouse pointer over the text you want.
Press Enter (or right-click anywhere in the window) to copy the text to the clipboard.
To Paste text when QuickEdit is enabled:
Right-click anywhere in the window.
To Copy text when QuickEdit is disabled:
Right-click the title bar, press Edit on the menu, and press Mark.
Drag the mouse over the text you want to copy.
Press Enter (or right-click anywhere in the window) to copy the text to the clipboard.
To Paste text when QuickEdit is disabled:
Right-click the title bar, press Edit on the menu, and press Paste.
Thanks Pablo, just what I was looking for! However, if I can take the liberty of improving your script slightly, I suggest replacing your ^V macro with the following:
; Use backslash instead of backtick (yes, I am a C++ programmer).
#EscapeChar \
; Paste in command window.
^V::
StringReplace clipboard2, clipboard, \r\n, \n, All
SendInput {Raw}%clipboard2%
return
The advantage of using SendInput is that
it doesn't rely on the command prompt system menu having an "Alt+Space E P" menu item to do the pasting (works for English and Spanish, but not for all languages).
it avoids that nasty flicker you get as the menu is created and destroyed.
Note, it's important to include the "{Raw}" in the SendInput command, in case the clipboard happens to contain "!", "+", "^" or "#".
Note, it uses StringReplace to remove excess Windows carriage return characters. Thanks hugov for that suggestion!
There is also a great open source tool called clink, which extends cmd by many features. One of them is being able to use ctrl+v to insert text.
On Windows 10, you can enable Ctrl + C and Ctrl + V to work in the command prompt:
Here's a free tool that will do it on Windows. I prefer it to a script as it's easy to set up. It runs as a fast native app, works on XP and up, has configuration settings that allow to remap copy/paste/selection keys for command windows:
Plus I know the developers.
simplest method is just the copy the text that you want to paste it in cmd and open cmd goto "properties"---> "option" tab----> check the (give tick mark) "quickEdit mode" and click "ok" .....now you can paste any text from clipboard by doing right click from ur mouse.
Thank you..
Thanks, Pablo, for referring to AutoHotkey utility.
Since I have Launchy installed which uses Alt+Space I had to modify it a but to add Shift key as shown:
; Paste in command window
^V::
; Spanish menu (Editar->Pegar, I suppose English version is the same, Edit->Paste)
Send !+{Space}ep
return
This is not really a shortcut but just a quick access to the control menu: Alt-space E P
If you can use your mouse, right click on the cmd window works as paste when I tried it.
Theoretically, the application in DOS Prompt has its own clipboard and shortcuts. To import text from Windows clipboard is "extra". However you can use Alt-Space to open system menu of Prompt window, then press E, P to select Edit, Paste menu. However, MS could provide shortcut using Win-key. There is no chance to be used in DOS application.
It took me a small while to figure out why your AutoHotkey script does not work with me:
; Use backslash instead of backtick (yes, I am a C++ programmer).
#EscapeChar \
; Paste in command window.
^V::
StringReplace clipboard2, clipboard, \r\n, \n, All
SendInput {Raw}%clipboard2%
return
In fact, it relies on keystrokes and consequently on keyboard layout!
So when you are, as I am, unfortunate to have only an AZERTY keyboard, your suggestion just does not work. And worse, I found no easy way to replace SendInput method or twist its environment to fix this. For example SendInput "1" just does not send digit 1.
I had to turn every character into its unicode to make it work on my computer:
#EscapeChar \
; Paste in command window.
^V::
StringReplace clipboard2, clipboard, \r\n, \n, All
clipboard3 := ""
Loop {
if (a_index>strlen(clipboard2))
break
char_asc := Asc(SubStr(clipboard2, a_Index, 1))
if (char_asc > 127 and char_asc < 256)
add_zero := "0"
else
add_zero := ""
clipboard3 := clipboard3 . "{Asc " . add_zero . char_asc . "}"
}
SendInput %clipboard3%
return
Not very simple...
If you use the clipboard manager Ditto (open source, gratis), you can simply use the shortcut to paste from Ditto, and it will paste the clipboard in CMD for you.
I followed #PabloG's steps as follows
goto http://www.autohotkey.com/ - download autohotkey
follow simple installation steps
after installation create new *.ahk file as follows right click on desktop > new > Autohotkey Script > giveAnyFileName.ahk
right click on this file > Edit
copy paste autohotkey script given by #PabloG in his answer
save and close
double click on file to run
Done now you should be able to use Ctrl+v for paste in command prompt
You could try using Texter and create something unlikely like:
./p , triggered by space and replacing the text with %c
I just tested it and it works fine. The only gotcha is to use a rare sequence, as Texter cannot restrict this to just cmd.
There are probably other utilities of this kind which could work, and even AutoHotKey, upon which Texter is built could do it better, but Texter is easy :-)
A simpler way is to use windows powershell instead of cmd. itworks fine with texter.
I've recently found that command prompt has support for context menu via the right mouse click. You can find more details here: http://www.askdavetaylor.com/copy_paste_within_microsoft_windows_command_prompt.html
Pretty simple solution may be Console 2, redefine keys and you go.
If you're a Cygwin user, you can append the following to your ~/.bashrc file:
stty lnext ^q stop undef start undef
And the following to your ~/.inputrc file:
"\C-v": paste-from-clipboard
"\C-C": copy-to-clipboard
Restart your Cygwin terminal.
(Note, I've used an uppercase C for copy, since CTRL+c is assigned to the break function on most consoles. Season to taste.)
Source
Instead of "right click"....start your session (once you're in the command prompt window) by keying Alt/SpaceBar. That will open the Command Prompt window menu and you'll see your familiar, underlined keyboard command shortcuts, just like in Windows GUI.
Good luck!
Under VISTA Command prompt:
Click on the System Icon
Select Defaults from the Menu
On the Options tab in the Options group I have
"Quick Edit Mode", "Insert Mode", and "Auto Complete" selected
I think that "Quick Edit Mode" is what makes it work.
To paste whatever is in the Clipboard at the insertion point: Right Click.
To copy from the Command Window
Select by holding down the left mouse button and dragging the pointer across what you want to copy
Once selected, right click
To paste at the insertion point, right click again.