Steps:
Installed Docker for windows here (stable)
Attempted to run: An error occurred, Hardware assisted virtualization and data execution protection must be enabled in the BIOS.
Went here the read
Made sure I have 64bit windows 10 pro and hyper-v turned on.
Made sure virtualization is enabled
Run Docker again: same error.
What am I doing wrong?
Here are some resources that might help:
https://forums.docker.com/t/bootcamp-running-windows-hardware-assisted-virtualization-and-data-execution-protection-must-be-enabled-in-the-bios/23519/2
https://forums.docker.com/t/mobylinuxvm-failed-to-start/15175
Related
I have a problem when installing a Docker Desktop 2.3.0.3
"Installation failed: one prerequisite is not fullfilled"
Docker Desktop requires Windows 10 Pro/Enterprise (15063+) or Windows 10 Home (19018+).
My Computer System Specification:
OS Name: Microsoft Windows 10 Pro
Version: 10.0.10240 Build 10240
RAM: 8Gb
I have tried manually Install Hyper-V and Containers in my Computer, but still failed to install the desktop docker.. Anyone can help me? Im need your help.
You need to install Windows 10 Home 2004 build which was released on May 2020, you can use Microsoft's update assistant to manually get the update if it's not showing up for you on Windows.
Get it here: https://www.microsoft.com/en-us/software-download/windows10
You may want to try Docker Toolbox
Docker Toolbox is an installer for quick setup and launch of a Docker
environment on older Mac and Windows systems that do not meet the
requirements of the new Docker Desktop for Mac and Docker Desktop for
Windows apps.
The actual required Windows version is greater than what it says in the installer GUI.
It might be a typo! and according to Docker this has happened before:
Docker actually requires Windows build xxxxx or greater - we're
working on the typo in the installer gui, but you'll need to update
your Windows to proceed. (Jan 8, 2018)
Just Update Windows and the problem goes away.
If you cannot update the system use choco
Install following the official Сhocolatey documentation: https://chocolatey.org/install
After installation, run the command choco install docker-desktop or follow the official installation documentation https://community.chocolatey.org/packages/docker-desktop
I've Windows 10 Pro system, and use Hyper-V on that system. Due to the needs of device redirection doesn't works well with Hyper-V, I've installed VMWare Workstation 14.
I have to disable Hyper-V to make VMWare Workstation work, at beginning. It worked until last weekend , seems because of the QFE update. I just verified, it was not QFE but Feature update to Windows 10, version 1803 that triggered the problem with VMWare Workstation again.
After Windows update completed (after reboot), I tried to start a VM in VMWare. I get the error dialog complaining about Device/Credential Guard.
Following the instruction in this link: https://kb.vmware.com/s/article/2146361, and after the reboot, I get another complaint about incompatibility with Hyper-V.
After reset the Hyper-V selection in Windows Feature or confirm that HyperV is not already removed, and reboot, the first error came back.
It gets in a loop of error complaining about Device Guard and complaining about Hyper-V for VMWare.
Ok, thanks to the answer from communities of VMWare: https://communities.vmware.com/thread/588526
The issue is now gone, by applying the following change:
Disable credential guard by using readiness tool from Microsoft: https://www.microsoft.com/en-us/download/details.aspx?id=53337, with this command: DG_Readiness_Tool_v3.2.ps1 -disable
Disable Hyper-V by using PowerShell command: Disable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V
Reboot and accept to boot without CG/DG.
Although I don't like that VMWare cannot work together with device guard from system, I get my VM working for the moment.
1- run cmd as admin
2- run : bcdedit /set hypervisorlaunchtype off
3- reboot
let me knew if it works please
good luck
here are the few steps for you to solve this issue:
Disable the HvHost service (and any other services with prefix Hyper-V if needed) from windows TaskManager(Ctrl+Alt+Del)
use the tool from the official website
Uncompress the downloaded zip file to your own directory, take C:\DG_Readiness_Tool_v3.5 here for instance.
Run Windows PowerShell as admin, type the following two commands:
cd C:\DG_Readiness_Tool_v3.5
.\DG_Readiness_Tool_v3.5.ps1 -Disable
Reboot
Adrian at https://answers.microsoft.com/en-us/windows/forum/windows_10-security/cannot-disable-memory-integrity-core-isolation-in/29ac5ce4-30d2-47d1-ab17-734980fd287b
says "I think it's a bug that this cannot be disabled via UI but fortunately it's possible through the registry by setting the following key to 0:"
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity\Enabled
This worked for me as well [Windows 10 Pro Version 1803(OS Build 17134.112, VMWare Workstation 14 Pro Version 14.1.2]
I'am trying to install docker toolbox in windows 8.1 64 bit operating system. When I try to open it after installing it throws error like
Running pre-create checks...
Error with pre-create check: "This computer doesn't have VT-X/AMD-v enabled. Enabling it in the BIOS is mandatory"
how to resolve this?
Unfortunately Intel B960 does not meet the system requirments needed for hyper-v a requirment for docker for windows.
Take a look at Docker Toolbox which is for older Windows systems that do not meet the requirements of Docker for Windows.
https://docs.docker.com/toolbox/toolbox_install_windows/
I want to install Docker on a physical Windows Server 2016 Datacenter Evaluation (Version 14393). I tried following the instructions from Quick Start Windows Server but installation fails:
Error message
The docker installer requires update KB3176936, which I installed then. Even after rebooting, the error message persists and I can't install docker.
I've enabled the Container feature and Hyper-V in Windows Feature Selection.
Any ideas what I'm doing wrong? I've could sucessfully setup docker on Windows 10.
You need to do a full Windows Update. I actually have a PR to add this step to the docs.
Run sconfig, then choose option 6 and then A and A to install all updates. This works for Server 2016 in no-desktop installs as well as with the UI.
I am a new to Docker. After the installation of Docker Toolbox (OS: Windows 10) I run Docker Quickstart Terminal and in the console I see this:
Running pre-create checks...
Error wirh pre-create check: "Hyper-V is installed. VirtualBox won't boot a 64bits VM when Hyper-V is activated. It it's installed but deactivated, you can use --virtualbox-no-vtx-check to try anyways"
Look like something went wrong in step 'Checking if machine default exists'...
Press any key to continue...
What did I do wrong? All checking of system and install steps are taken from here.
Thank you very much for your help!
Hyper-V and VirtualBox are conflicting each other.
You can either uninstall Hyper-V or run
docker-machine create -d virtualbox --virtualbox-no-vtx-check test
Source
Docker supports Hyper-V as the driver
You need to perform the following steps:
Create a virtual switch, refer to this article on how to do that
Create a docker machine using that network switch and hyper-V driver.
docker-machine create -d hyperv --hyperv-virtual-switch "name of the virtual switch created above" default
I got the same error when I installed Docker Toolbox on my Windows 10 machine.
Solution:
Install Docker Community Edition (not Docker Toolbox)
Enable Hyper-V
Open Control Panel -> System and Security -> Programs (left panel) -> Turn Windows features on or off -> Check the Hyper-V box
As of 2017's Win 10, if you don't have Hyper-V option, then your Windows OS is not Enterprise Edition. Also, Docker seems to work a lot better on Intel processors (not AMD).
Add C:\Program Files\Docker\Docker\resources\bin to Path in Environmental Variables.
Open Git Bash and type docker-compose up and now that command should work.
If you don't have GitBash, please download it.
I was having the same issue, and this blog post solved it. The author runs you through the steps of adding the --virtualbox-no-vtx-check flag to the docker shell script.
Virtualbox and Hyper-V don't play well together. I am NOT the author.
I set the Hyper-V off using windows feature on off and it worked for me.
See if when you run:
docker-machine create -d hyperv --hyperv-virtual-switch "Virtual Switch" default
you get Error with: pre-create check: "Hyper-V PowerShell Module is not available"
If so just enable in Docker(icon on your desktop)->settings->expose daemon on TCP ...
You need to disable Hypervisor to check new application that use VT-x before the virtual machine launch:
Open the command prompt as Administrator
Run bcdedit to check hypervisor status:
Check hypervisor launch type.
If is set to auto then disable it:
bcdedit /set hypervisorlaunchtype off
Reboot host machine and launch VirtualBox again
After performing above steps I opened again Docker Quickstart terminal and it is working fine.
I pressed the Windows Button on keyboard. Typed 'Hyper-V Manager'. It opened the 'Hyper-V Manager'. Then I right clicked on my machine name. There was an option to 'stop'. I selected this option. It stopped the 'Hyper-V' on my machine and then Kitematic worked fine, i.e., it download the hello-world-nginx and displayed the web page.
NOTE: This is strange and I am not sure why. Once I have done above steps, now when I restarted the Hyper-V using Hyper-V Manager, Kitematic is still working and downloading images. Can anybody comment why it is now still working when Hyper-V is also running ? Thank you.
Good
Ali Ahsan
The solution as suggested by #Gene is correct and works perfectly if:
One has windows pro edition
Both Hyper-V Management Tools and Hyper-V Platform are enabled
Sometime this isn't always the case; here is what to do:
Check Windows Edition:
To check which version right click on Windows key and select System.
Scroll down to Windows specifications and look at [Edition]
Check Hyper-V Platform (virtualisation)
For Hyper-V Platform to be enabled one must turn on virtualisation; normally this is done via the BIOS.
On HP laptop one this is done from the BIOS.
On start-up click Ctrl+F10
Press the right arrow key to System Configuration tab.
Select Virtualization Technology and then press the Enter key.
Select Enabled and press the Enter key.
Once these steps are done then:
Search for Turn Windows features on or off.
Scroll down to Hyper-V
Tick this box (Ensure you see a tick NOT a black box which indicates some features not enabled)
Upon restart docker should be running... good luck !!