After running vagrant up command, I get this error:
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'bento/ubuntu-16.04-i386'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'bento/ubuntu-16.04-i386' is up to date...
==> default: Setting the name of the VM: vagrant_default_1494490054450_47471
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 8000 (guest) => 8000 (host) (adapter 1)
default: 8080 (guest) => 8080 (host) (adapter 1)
default: 5000 (guest) => 5000 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'unknown' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
When I look at the virtualbox GUI everything seems to be fine, it's in running state and I can even log in into linux. Im running it on Windows 10 OS, Vagrant 1.9.4, VirtualBox 5.1.22
Ok, I solved the problem. I did not have virtualization enabled on my laptop.
Related
I am having an issue with vagrant and virtualbox in which I am able to vagrant up fine but after a few minutes (sometimes it's 5 minutes sometimes it's an hour) my virtualbox gets set to an 'ABORTED' status. I am unsure of why this happens.
I'm using VirtualBox 5.1.28 and the most recent version of vagrant (2.0.0). I'm running macOS Sierra 10.12.6.
Below is the output of my vagrant up command. I've noticed there is a disconnect retry thing but I don't know why that is there. It is not there for my coworkers. I've done some googling already and all the people with the same problem never make it out of the disconnect retry loop.
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Specific bridge 'en1: Wi-Fi (AirPort)' not found. You may be asked to specify
==> default: which network to bridge to.
==> default: Available bridged network interfaces:
1) en0: Wi-Fi (AirPort)
2) en1: Thunderbolt 1
3) en2: Thunderbolt 2
4) bridge0
5) p2p0
6) awdl0
==> default: When choosing an interface, it is usually the one that is
==> default: being used to connect to the internet.
default: Which interface should the network bridge to? 1
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: bridged
==> default: Forwarding ports...
default: 80 (guest) => 8080 (host) (adapter 1)
default: 3306 (guest) => 33306 (host) (adapter 1)
default: 5000 (guest) => 5000 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: password
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Connection reset. Retrying...
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Connection reset. Retrying...
default: Warning: Remote connection disconnect. Retrying...
default:
default: Inserting generated public key within guest...
default: Removing insecure key from the guest if it's present...
default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /vagrant => /Users/jdavis/hts_vagrant
default: /app/localhost/html => /Users/jdavis/projects
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.
==> default: Running provisioner: shell...
default: Running: inline script
I am trying to get up my vagrant up, but am having some trouble with it. This is what happens when I do a vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'puphpet/centos65-x64' is up to date...
==> default: A newer version of the box 'puphpet/centos65-x64' is available! You currently
==> default: have version '20161004'. The latest is version '20161102'. Run
==> default: `vagrant box update` to update.
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 8080 (guest) => 9090 (host) (adapter 1)
default: 8443 (guest) => 9443 (host) (adapter 1)
default: 8787 (guest) => 8787 (host) (adapter 1)
default: 3306 (guest) => 3307 (host) (adapter 1)
default: 9990 (guest) => 9990 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
When I do a vagrant ssh-config, I get the following
Host default
HostName 127.0.0.1
User vagrant
Port 2222
UserKnownHostsFile /dev/null
StrictHostKeyChecking no
PasswordAuthentication no
IdentityFile "/Users/ritwickgupta/.vagrant.d/insecure_private_key"
IdentitiesOnly yes
LogLevel FATAL
I tried looking what was happening in my VM, and everything looks ok. I can login into my VM without any issue. Does anyone what what's happening here?
I built the box version you are currently using, 20161004, with VirtualBox 5.1.x. This required users to upgrade to that version for boxes to work.
I have since rebuilt the boxes using VirtualBox 5.0.16, 20161102.
Please delete your local box and download the new version.
I've been using vagrant to run laravel/lumen as well as just other general stuff such as node js scripts. I've run into problems installing some things using npm, and it seems that a solution working for a lot of people is just running the command line (or git bash in my case) as an administrator. However when I try this and use vagrant up, I get a long list of errors. I've also tried vagrant init which gives the same errors.
Here are the errors
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 (guest) => 8000 (host) (adapter 1)
default: 443 (guest) => 44300 (host) (adapter 1)
default: 3306 (guest) => 33060 (host) (adapter 1)
default: 5432 (guest) => 54320 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
v==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /vagrant => C:/Users/Andy McNally/Homestead
vag default: /home/vagrant/home => C:/Users/Andy McNally/home
r==> default: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always
will still run.
I get this error message when I try to vagrant up in my git-bash.
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'laravel/homestead'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Setting the name of the VM: homestead-7
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 (guest) => 8000 (host) (adapter 1)
default: 443 (guest) => 44300 (host) (adapter 1)
default: 3306 (guest) => 33060 (host) (adapter 1)
default: 5432 (guest) => 54320 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
The problem is that i do not get any errors and if I go into my Virtualbox GUI, the VM is running!
Anybody who have experienced the same thing a have a solution.
It is on windows 10, with the latest virtualbox and vagrant.
I have just installed it on my laptop at home and i works fine, but at work on a work domain it won't, so can't really see what is wrong here.
This happened to me when I was setting up a Windows box. So, I would check if Virtualization is enabled in BIOS. If it is disabled, enable it. Try to boot again.
I am trying to run Laravel Homestead box on DigitalOcean's Ubuntu 14.04 LEMP droplet. I'm following these two tutorials:
How to install Vagrant on a VPS Running Ubuntu 12.04
Laravel Homestead
But I can't seem to start up the box after the installation. I keep getting this error message:
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'laravel/homestead'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Setting the name of the VM: homestead
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 => 22280 (adapter 1)
default: 443 => 22443 (adapter 1)
default: 3306 => 23306 (adapter 1)
default: 5432 => 25432 (adapter 1)
default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'gurumeditation' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.
Here is my VirtualBox's error log:
VirtualBox log