Visual Studio Code reports "It look like git is not installed on your system." when I try to switch to the git view. I know I have git installed and used by other Git clients. I guess if I reinstall Git following Visual Studio Code's instruction ("install it with Chocolatey or download it from git-scm.com"), it probably can fix the problem, but I don't want to mess up the existing Git clients on my system. Is there a reliable way to configure Visual Studio Code so it can find existing git installation?
Now you can configure Visual Studio Code (version 0.10.2, check for older versions) to use an existing Git installation.
Just add the path to the Git executable in your Visual Studio Code settings (menu File → Preferences → Settings) like this:
{
// Is Git enabled
"git.enabled": true,
// Path to the Git executable
"git.path": "C:\\path\\to\\git.exe"
// Other settings
}
Update 2020 (Mac)
I went through this $h!† again after updating to macOS v10.15 (Catalina), which requires an Xcode update.
And to clarify, while this post is about Visual Studio Code, this issue, is system wide. Your Git install is affected/hosed. You can try to run git in your terminal, Bash, Z shell (zsh), or whatever. It is now and it just won't.
It is the same fix. Just update Xcode. Start it up and agree to the license. That's it.
I hit this on Mac/OS X.
Symptoms:
You've been using Visual Studio Code for some time and have don’t have any issues with Git
You install Xcode (for whatever reason - OS update, etc.)
After installing Xcode, Visual Studio Code suddenly "can't find Git and asks you to either install or set the Path in settings"
Quick fix:
Run Xcode (for the first time, after installing) and agree to license. That's it.
How I stumbled upon this "fix":
After going through numerous tips about checking git, e.g., which git and git --version, the latter actually offered clues with this Terminal message:
Agreeing to the Xcode/iOS license requires admin privileges, please run “sudo xcodebuild -license” and then retry this command.
As to why Xcode would even wrap it's hands on git, WAT.
Visual Studio Code simply looks in your PATH for git. Many UI clients ship with a "Portable Git" for simplicity, and do not add git to the path.
If you add your existing git client to your PATH (so that it can find git.exe), Visual Studio Code should enable Git source control management.
This can happen after upgrading macOS. Try running Git from a terminal and see if the error message begins with:
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools) ...
If so, the fix is to run:
xcode-select --install
from the terminal. See this answer for more details.
I had this problem after upgrading to macOS v10.15 (Catalina).
The issue is resolved as follows:
1.
Find the Git location from the terminal:
which git
2.
Add the location of Git in settings file with your location:
settings.json
"git.path": "/usr/local/bin/git",
Depending on your platform, the user settings file (settings.json) is located here:
Windows %APPDATA%\Code\User\settings.json
macOS $HOME/Library/Application Support/Code/User/settings.json
Linux $HOME/.config/Code/User/settings.json
In Visual Studio Code, open 'User Settings': Ctrl + P and type >sett. Press Enter.
This will open the default settings on the left side and User Settings on the right side.
Just add the path to git.exe in user settings:
"git.path": "C:\\Users\\[WINDOWS_USER]\\AppData\\Local\\Programs\\Git\\bin\\git.exe"
Replace [WINDOWS_USER] with your user name.
Restart Visual Studio Code.
First check if Git* is installed or not in your system by typing the command in cmd /command prompt (in Windows):
where git
If you get an output like this,
λ where git
C:\cmder\vendor\git-for-windows\cmd\git.exe
Then Go to Settings → Preferences → Settings and put the bellow code** right part.
{
// If git enabled?
"git.enabled": true,
// Path to the Git executable
"git.path": "C:\\cmder\\vendor\\git-for-windows\\cmd\\git.exe"
}
If you don't have Git installed, install Git from https://git-scm.com/
** Just add a double slash (\\), just like the above code.
UPGRADE TO MacOS Ventura < 13.0
As of November 2022
Upgrading to MacOS Ventura does not seem to affect your coding environments too much.
After upgrading to macOS Ventura your Terminal and VScode will give off a few errors. Such as:
It look like git is not installed on your system ..
or
can't find Git and asks you to either install or set the Path in settings
some errors depend on your zsh setup or other customizations.
These common problems can be resolved by simply by reinstalling xcode command line tools and updating Homebrew - since your terminal might be affected reinstall from apples executable https://developer.apple.com/download/all/
developer.apple.com you will need to log in with your apple id.
Once installed, update Homebrew
brew upgrade
Mac M1 - M2 machines likely have some native and ARM applications so run:
arch -arm64 brew upgrade
Close all terminals and Vscode to restart!
reopen Vscode, errors should be gone.
If Vscode is still looking for Git path you will need to add it manually.
Find git location and copy from the terminal:
which git
and add the path to the git executable in your Visual Studio Code JSON settings file (File -> Preferences -> Settings) find and update the line - should look similar:
"git.path": "/usr/local/bin/git",
After an OS X update, I had to run xcode-select --install for GitLens to work.
Ran into the same problem after!
how I fixed it?
Step 1: Go to the Settings in vscode.
Step 2: Open settings.json.
Step 3: You need to find something like "git.path" in settings.json
Step 4: just add the directory path where git is installed in your system.
example : "git.path": "D:/Git/bin/git.exe"
Step 5: Restart your vscode.
Hope this helps.
Run
xcode-select --install it'll prompt you to install command line developer tools. Install the tools and installation restart your VScode.
You'll see git working once again in VScode
I ran into this problem after upgrading my macOS to Monterey.
It turned out that the xcode has been removed in the new update from my mac. Just tried the following suggested solution:
https://stackoverflow.com/a/52522566/11207358
VSCode 1.50 (Sept 2020) adds an interesting alternative with issue 85734:
Support multiple values for the git.path setting
I use VSCode in three different places; my home computer, my work computer, and as a portable version I carry on a drive when I need to use a machine that doesn't have it.
I use an extension to keep my settings synced up between editors, and the only issue I've encountered so far is that the git path doesn't match between any of them.
On my home machine I have it installed to C of course,
work likes to be funny and install it on A,
and for the one on my drive I have a relative path set so that no matter what letter my drive gets, that VSCode can always find git.
I already attempted to use an array myself just to see if it'd work:
"git.path": ["C:\\Program Files\\Git\\bin\\git.exe", "A:\\Git\\bin\\git.exe", "..\\..\\Git\\bin\\git.exe"],
But VSCode reads it as one entire value.
What I'd like is for it to recognize it as an array and then try each path in order until it finds Git or runs out of paths.
This is addressed with PR 85954 and commit c334da1.
with VSCode 1.60+
"git.enabled": true
git.path
I faced this problem on macOS v10.13.5 (High Sierra) after upgrading Xcode.
When I run the git command, I received the below message:
Agreeing to the Xcode/iOS license requires admin privileges, please run “sudo xcodebuild -license” and then retry this command.
After running the sudo xcodebuild -license command, the below message appears:
You have not agreed to the Xcode license agreements. You must agree to both license agreements below in order to use Xcode.
Hit the Enter key to view the license agreements at '/Applications/Xcode.app/Contents/Resources/English.lproj/License.rtf'
Typing the Enter key to open the license agreements and typing the space key to review details of it, until the below message appears:
By typing 'agree' you are agreeing to the terms of the software license agreements. Type 'print' to print them or anything else to cancel, [agree, print, cancel]
The final step is simply typing agree to sign with the license agreement.
After typing the git command, we can check that Visual Studio Code detected Git again.
I have recently started with Visual Studio Code. I have this issue and just writing the exact path of the Git executable solves
the issue. Here is the code:
"git.path": "C:\Program Files\Git\bin\git.exe",
If you have multiple environments. You could include Git Path in the Visual Studio Code Workspace Setting. For Windows, depending on your setting, you could hit Ctrl + P, search for "settings". Open settings.json (or menu File → Preferences → Settings). Navigate to Workspace Settings. Find "Path" and add paths to Git bin and cmd folders.
Environments can have their own paths. I discovered this when I echoed my PC %PATH% on cmd. Git bin and cmd path where available, but when I was working on my project, echoed %PATH% did not have git and cmd folder. Adding them, as shown above, solved the issue.
Extra Notes:
On cmd, you can echo "%PATH%" and see if git bin and cmd folders are included. If not, you could concatenate using SETX PATH on, for example,
SETX PATH "%PATH%;Path_to_Git_bin;Path_to_Gt_cmd;"
This will make git available on local, root but not in some environments which comes with their own paths (SETX /M PATH "%PATH%;Path_to_Git_bin;Path_to_Gt_cmd;" would have though).
In case you have a long Path that is chopped off due to Path length (getting "Error: Truncated at X characters." message), you can increase the path length in RegEdit.
In "Search Windows", search for "regedit". Right-click to open as Administrator.
Go to Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem
Right-click and modify. Change value data from 0 to 1
This will increase your path length. If it is already one, then I am not sure how to proceed from there :).
[9
The only way I could get to work in my Windows 8.1 is the following:
Add to system environment variables (not user variables):
c:\Users\USERNAME\AppData\Local\GitHub\PortableGit_YOURVERSION\bin\;c:\Users\USERNAME\AppData\Local\GitHub\PortableGit_YOURVERSION\libexec\git-core\;c:\Users\USERNAME\AppData\Local\GitHub\PortableGit_YOURVERSION\cmd\
This fixed the "it looks like git is not installed on your system" error on my Visual Studio Code.
Make sure git is enabled (File --> Preferences --> Git Enabled) as other have mentioned.
Make sure Gits installed and in the PATH (with the correct location, by default: C:\Program Files\Git\cmd) - PATH on system variables btw
Change default terminal, Powershell can be a bit funny, I recommend Git BASH but cmd is fine, this can be done by selecting the terminal dropdown and selecting 'set default shell' then creating a new terminal with the + button.
Restarting VS Code, sometimes Reboot if that fails.
Hope that helped, and last but not least, it's 'git' not 'Git'/'gat'. :)
In my case GIT was installed on my WIndows 10 OS and there was an entry in PATH variable. But VS CODE 1.52.1 still unable to detect it from terminal window but it was available in CMD console.
Problem was solved by switching terminal from PowerShell to CMD or Shell + VsCode restart.
I solved the same problem on MacOS with m1 pro processor by installing Git Lens Visual Code extension. The changed files were displayed after enabling the extension. Then I turned reloaded the VSCode and there was no changes, but once I run
git status
in terminal, it shows all the files, and all changes are tracked.
Faced this issue after updating macOS!
Installed git again using homebrew and it worked!
brew install git
FOR MAC
First, type
git
in the terminal and see what error you are getting.
Then:
If the error is related to Command Line tool!
Run:
xcode-select --install
And
Just go ahead and go through this answer, For Mac especially. Worked very easily for me.
https://apple.stackexchange.com/a/254381
Three years later, I ran into the same issue. Setting the path in user settings & PATH environment variable didn't help. I updated Visual Studio Code and that solved it.
First install Git onto your desktop, and then add the encircled extension in Visual Studio Code, as seen in the picture.
That helped me fix the same issue you have.
Open
C:\Users\nassim\AppData\Roaming\Code\User\settings.json
Comment any Git line there:
// ...
// "git-graph.integratedTerminalShell": "E:\\Apps\\Git\\bin\\bash.exe",
// "git.path": ""
//...
And add git.exe to the OS path.
Note for me: Fixing this Git error also fixed the npm error too. Since they are both defined in the path, if one fail, the remaining will fail as well.
Follow this :
1. File > Preferences > setting
2. In search type -> git path
3. Now scroll down a little > you will see "Git:path" section.
4. Click "Edit in settings.json".
5. Now just paste this path there "C:\\Program Files\\Git\\mingw64\\libexec\\git-core\\git.exe"
Restart VSCode and open new terminal in VSCode and try "git version"
In case still problem exists :
1. Inside terminal click on terminal options (1:Poweshell)
2. Select default shell
3. Select bash
open new terminal and change terminal option to 2:Bash
Again try "git version" - this should work :)
What worked for me was manually adding the path variable in my system.
I followed the instructions from Method 3 in this post:
https://appuals.com/fix-git-is-not-recognized-as-an-internal-or-external-command/
If git is missing after the OS update, in my case Big Sur, just literally: brew install git
I edited Path into System Environment and add "C:\Program Files\Git\bin" then restart Vscode. It's worked for me. I don't understand why I am using it normally then I have this problem. Maybe during the installation of something it causes that problem.
It worked for me just by installing git for windows, from this link https://git-scm.com/download/win
There was no need of setting environment variable or path.
Context:
I had installed VS Code, and github desktop, I cloned the repo using Github desktop.
When I opened repo, using VS Code, I saw this error.
I resolved by installing git for windows.
I installed the JDK8u40, but only find the javafx-src.zip.
Where can I find the source code for JDK? The src.zip?
Below is what I get after installation:
And btw, I didn't see the installation wizard! This is quite strange.
ADD 1
Today I tried several Java installation packages. All are downloaded from Oracle official site.
jdk-6u45-windows-i586.exe
jdk-7u75-windows-i586.exe
jdk-8u20-windows-i586.exe
jdk-8u25-windows-i586.exe
jdk-8u31-windows-i586.exe
jdk-8u40-windows-i586.exe
Both 6u45 and 7u75 installed well on my box. I can see the install wizard. And the src.zip is installed.
But 8u25 ~ 8u40 all installed silently. And no src.zip file is installed because I have no chance to select it in the wizard.
I am not sure if this is my fault or someone at Oracle made a mistake.
As #SubOptimal commented, the /s option indicates a silent install. I am wondering if there's an option to force the GUI install wizard to open.
I am using Windows 7 Enterprise x64 Build 7601 SP1
Make sure the Source code is not disabled when downloading.
Then as you can see on the picture, selecting "Source Code" will tell you exactly where it is located.
Notice that I've downloaded the 32 bits version to make sure to reproduce the same use case as you.
Edit
As per your new edits and comments, it seems what you want to know now is why you don't see the installation wizards. I'm pretty sure this is due to old-set registry key.
Run the following command
reg query hklm\software\microsoft\windows\currentversion\installer\UserData\S-1-5-18\Products /f "java" /s | find "HKEY_LOCAL_MACHINE"
Now, navigate to each of the returned path browsing with regedit and delete their entire parent (the big hexa number).
Re-try the installation and I'm pretty sure you will see the wizard.
As for the sources, Oracle documentation specify how to download them in silent mode.
jdk.exe /s ADDLOCAL="SourceFeature"
This is the way I got the src folder from jdk-8u172-windows-x64.exe file without installing.
Step1: Download jdk-8u172-windows-x64.exe file (Java SE Development Kit 8u172) from oracle site
Step2: Extract it and navigate to the path:
\jdk-8u172-windows-x64.rsrc\1033\JAVA_CAB9
Step3: Right click on file named "110" and extract it.
You will get the src.zip file.
It took me little while to figure this out. I hope it will help others.
Enjoy debugging Good Code!
I don't know why/where the src.zip is, but as an alternative, if all you want is the source and somehow the proposed method doesn't work for you, you could always pull directly from the JDK8u40 source tree.
You will need Mercurial instead of Git. This link talks about the hg clone command
Quoting from the OpenJDK Java.net site
The corresponding master forest jdk8u can be cloned using this command: hg clone http://hg.openjdk.java.net/jdk8u/jdk8u;cd jdk8u;sh get_source.sh .
In addition, the source code for the last release, 8u40, is available by cloning the 8u40 master forest : http://hg.openjdk.java.net/jdk8u/jdk8u40. The final build of that release was tagged as jdk8u40-b25.
There are differences between OpenJDK and Oracle's, though subtle
download JDK 8 from following link
http://www.oracle.com/technetwork/java/javase/jdk-8-readme-2095712.html
src.zip comes in-built with it
if you JDK installer silently skips installing the source. just open the control panel > programs an features and find Java. Right click on it and select change and then select the
source (option) ;)
Download the JDK
Run the Installer, but stop right away
Extract src.zip from C:\Users\<your_username>\AppData\LocalLow\Oracle\ss180121.cab
You can extract .zip from .cab with tool like 7Zip
Taken from
I need a terminal that will support svn on windows and I found that MobaXterm is one of them. However going to their plugin installation page which says:
To install these plugins, just download them and put them in the same directory than the MobaXterm executable.
So I downloaded it and put it in the file
C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition however I still get the error message
Sorry: Svn is not included in this version of MobaXterm.
You can check online if you find a Svn plugin for MobaXterm
by ctrl+clicking here: http://mobaxterm.mobatek.net .
If you need a custom version of MobaXterm that includes Svn,
do not hesitate to ask us for a quotation: mailto:contact#mobatek.net .
Does anyone have experience with this software or recommended a terminal that can support svn in windows?
You need to go into the C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition or whichever edition you have and place the plugin there. Restart MobaXterm and it should work.
I normally collect all the plugins which I require from http://mobaxterm.mobatek.net/plugins.html
Once the .mxt3 files are getting downloaded, I moved them to the installed folder where the MobaXterm_.exe is there.
After restarting MobaXterm, this will work like a champ.
Hope if this solves your issue faster.
Start MobaXterm terminal.
Type MobApt or apt-get. This will open MobApt package manager.
Once in the package manager, you have a variety of tools/commands that you can install by simply selecting and pressing Install/Update.
i know the question is old. but you should put the plugin into your home.
if you check the setting you see this is the home directory
%CurrentDrive%:\Users\USERNAME\Documents\MobaXterm\home
witch is :
C:\Users\USERNAME\Documents\MobaXterm\home -- or whatever drive that u installed windows
i just installed the python plugin and it works fine
In Mobaxterm simply type : apt-get install subversion
Usable just right after installation. No need to restart.
Same for git.
Change the name of the .mxt3 file (that you downloaded) to .zip
Extract the files, get the .exe files you want from the bin folder
from the files you just extracted, and add them to the slash/bin
folder of the Mobaxterm (where there are more .exe files)
Restart
In order to finish your plugin installation, you need to restart MobaXterm. After restarting, type "svn" in the terminal and it should work.
Try run the command:
#unalias svn
When I saw $PATH and looked into its directories, there was no git.exe.
I downloaded git.mxt3 and put in program files (86) folder and restarted mobaterm.
After restart I can see a file named git.exe in my /bin folder. I am using Win7 (64 bit) and mobaXterm personal Edition v7.1 installed using windows installer (not portable )
MobaXterm already has a 'Packages' button where you can search for plugins and download them. You don't need to go to github and other places to find the necessary files. Just using the built-in search feature under the 'Packages' option at the top of MobaXterm.