Related
All my project (from the same solution) references are marked with a yellow triangle. The projects are all set to the same .NET version (4.5.1). The error log says:
The project 'CommonLibrary' cannot be referenced.
A way to temporarily fix the issue is to either:
Remove and re-add the references
Right click and choose Add Service Reference and immediatelly cancel.
However, the triangles come back every time I start the solution.
The solution is build successfully regardless or the issue. The real issue is that Resharper acts like the references don't exist.
Another thing that might be relevant is that I have 2 projects that are supposed to be unloaded but they become active every time I load the solution.
Any idea what to do with the issue?
I had similar issues and it usually comes down to the Target Framework (Project>Properties>Application). I was working on a solution using .NET 4.6 and for some reason the default framework for new projects have a different target (in my case it was 4.5.2). So make sure you check all your project at the very least have the same target framework.
Do the following:
In vs choose: tools->options->resharper->options-> general-> click the clear caches button.
then close all your opened tabs and shut down vs2013.
finally, start vs2013 again.
Let me know if that worked for you.
Try switching to managed compatibility mode in VS2013
you can do that by going to tools->options..->General tab and check the Use managed compatibility mode
I had the same thing happen but didn't suspect the 24 warnings I was getting was related to this error: Error 1 Unable to locate the .Net framework aspnet_merge.exe tool on path '~\Photo Archive\Main\etc\tools'. You need to set the msbuild property 'AspnetMergeToolPath' to the folder containing this tool. ODOT.PhotoArchive.Web
Trying to set the MS build property led to a lot of research just to find out WHICH property to set. So, Agent Ransack to the rescue -- searched my drive for the most recent version of the tool and copied it to the directory Visual Studio was complaining about.
Rebuilt the project with the idea of clearing the error but then the 24 warnings also disappeared.
FYI -- this is an MVC project which will replace a classic asp project. This might be peculiar to MVC projects.
At any rate, there was a lot of chasing snipes before this was finally tried. So, where this is happening, try handling any errors no matter how remote the possibility is they're related to the issue.
I had the same problem as you can see in this picture.
Its reason was the hidden folder. I had hidden the folder containing the project files. I got rid of this problem by unchecking the hidden attribute of the root folder containing the project files and restarting the visual studio.
Check it once, you might have checked the folder to be hidden.
I have just moved an Asp.Net MVC project into our main solution, straight away the performance in cshtml files is incredibly slow, you can see each character appear after a 1 second delay. Also switching between .cs files also takes 1 second.
Outside of this solution performance is fine, this solution holds a number of projects which my solution references.
The problem occurs on 2 machines which have Update 2 present, a machine that doesn't have Update 2 present doesn't get the problem
Neither my machine nor the others use any plugins
Obviously I have a workaround, just do my coding outside of the main solution but has anyone else experienced this?
thanks
I have had similar issue with performance of some files and found it to be Plugin related. For my setup the issue was Web Essentials 2013 needed to updated.
If that doesn't work, try disabling all of your plugins, especially and large ones like Resharper (and Resharper plugins!), restart VS and see if the problems are resolved. Then renable plugins until you have found the culprit.
I can make it freeze simply by putting a debugger keyword in a ts file, as soon as it hits it it freezes VS for a good minute, there are other problems all seemingly related to .ts files.
I went up to RC3, no change. Uninstalled and went back to VS2013 without any updates and it now works fine
NB RC3 did -not- help it at all
Just to be clear, I have never installed Web Essentials and this is now VS2013 with "microsoft.com/en-gb/download/details.aspx?id=34790"; installed
I installed VS2013 (v12.0.21005.1) and added ReSharper 8 (v8.0.2000.2660) a day or two ago. That day it was fine. Now I'm lucky if I can get it to open one solution in a whole day. It opens OK by itself, but when I try and open a solution from within - via the menu - it hangs, badly. If I right-click a solution in Windows Explorer and 'open with VS 2013', it opens then hangs, in exactly the same way. Every now and again, for hours, I get a little notice that it's busy with something.
Anyone know what could be wrong, before I endure a reinstall that doesn't fix the problem?
Sometimes it's enough to simply delete the ".v12.suo" file and try to open the solution again. Helped me many times when VS2013 was freezing on loading a project.
Deleting all ".suo" files worked for me. There were several copies due to opening the solution in multiple versions of Visual Studio.
Edit:
Possible path could be:
PathToSolution\.vs\ProjectName\v14\
.vs may be a hidden folder.
.suo is filename.
Basically it could be anything, but you can try a few things:
Turning it off and on again.
Clear the ReSharper cache, it's in %LOCALAPPDATA%\JetBrains\ReSharper\<CurrentVersion>\SolutionCaches, where you should find a folder matching the solution you are trying to open. Just close all instances of VS2013, delete the folder and try again.
turn off ReSharper: Tools > Options > ReSharper > General > Suspend
uninstall ReSharper completely and see if problems persists.
Repair Visual Studio through Programs and Features.
I found the following to be the better approach to debugging VS based on MS Connect instructions
Please help to confirm if your captured dump file is a 32-bit dump file. If it is a 64-bit dump file, please use the following step to capture a new dump file.
Start Visual Studio.
Start another instance of VS.
In the second instance click Tools | Attach to Process...
In the list of processes locate devenv.exe.
Click Select... and explicitly choose 'Native' and 'Managed' code.
Click OK and OK to close Select dialog and Attach to Process dialog.
Go back to the first instance of VS and repro the hang.
Upon the hang, control should go to the second instance of VS. If not please go back to the second instance of VS manually, and hit "Break All".
In the second instance click Debug | Save Dump As Minidump with heap.
If you are running the VB profile you will not see the Save Dump As menu item. To add this menu item:
Select Tools -> Customize
Select the Commands tab
Select Debug from the Menu bar dropdown
Click Add Command...
Select Debug from the Categories list.
Find the Save Dump As entry in the Commands window.
Click OK (the Save Dump As... command is added to the top of the Debug menu).
Click Close
You can get detailed steps about how to get the dump file and call stack at http://blogs.msdn.com/debugger/archive/2009/12/30/what-is-a-dump-and-how-do-i-create-one.aspx
If you find the problem is with Resharper Addin you can then report the issue via - http://youtrack.jetbrains.com/issues/RSRP
Suspending Resharper Worked for me.
Goto
Tools -> Options -> ReSharper -> General -> Suspend Now
Now your solution will load very fast.
After your solution fully loaded, you can change the Resharper settings to Resume Now.
Are you using any node modules in your project? Or can you identify that it is a ReSharper specific issue?
If you've got NPM modules (eg. for Grunt), mark your 'node_modules' folder as 'hidden' (no need to make child folders hidden though), and try again.
Visual Studio was hanging on open for me, turned out it was trying to scan deeply nested node modules with file paths longer than the Windows maximum (260 characters), and this was preventing me from opening the solution in VS, but marking the folder as hidden solved the problem.
I had this issue recently as well, and found that disconnecting my computer from the internet when loading the project fixed it. With this, I managed to cut loading times from several hours down to seconds. Since my network cable is not particularly accessible, I simply disabled my network adapter before loading the project (in Control Panel).
This soon became frustrating, however, and I recently looked into the problem again. It seems that logging on to my Microsoft account in Visual Studio ultimately fixed the problem, and I now have no more issues loading projects.
This may work for you as well (if you haven't yet fixed it - but since there is no accepted answer here, I assume that the problem is persisting), so I suggest that you at least try disconnecting from the internet, even if you would rather not enter your Microsoft credentials.
I went into the %LOCALAPPDATA%\JetBrains\ReSharper\
and opened all the directories looking for the SolutionCaches, and emptied all of them. Problem solved. The application was quite large, so this helped.
Check for Windows updates
I had this problem too. Furthermore, I couldn't open my Windows firewall settings (trying to block VS's internet connection).
When opening update settings (Windows 8), I saw there was a pending update ("found today"), so I rebooted my computer, letting Windows update. After that, VS and the firewall worked fine again.
Check your hardware
I've had the problem a second time; even Windows 8's update page would keep loading forever. It was an issue with my (non-OS) hard drive: https://superuser.com/questions/756261/various-parts-of-windows-8-and-visual-studio-2013-get-blocked-by-possibly-comm?noredirect=1#comment978074_756261
I get this issue now and again - VS 2013 Update 2, Win 8.1, IE 11.
Try this - Open task manger, kill the VS app hanging, and then close any IE sessions that are running in the Background Process list - there may be one or more hanging around.
Restart VS
Seems to clear it for me, without a reboot.
The problem I had was the Perforce connection.
When opening the solution, it would ask if I wanted it to connect to Perforce. Allowing it to try would make it hang and allocate 1.5 GB of RAM.
Not allowing the P4 connection let it load properly (allocating 1 GB RAM). Then I could tell it to connect to P4 after, and it is now fine.
For me , whether computer crashes with power outage, or sometimes with mandatory reboots in the middle of the night. What does WORK for me
DELETE ALL FILES IN THIS DIRECTORY:
C:\Users\yourusername\AppData\Local\Microsoft\WebsiteCache\
For anyone still referring this helped me:
I had to always delete .vs12.suo file to load the project.
I came across this thread from Microsoft and following that I created registry entry which fixed my issue with Solution load.
https://connect.microsoft.com/VisualStudio/feedback/details/860685/visual-studio-hangs-after-10s-when-loading-solution-corrupt-suo
I had similar issue, when i checked the solution file it was created by VS.Net 2012. To resolve the issue, I created dummy solution file and reloaded the projects from vs.net 2012.
Also observed when nuget package update got screwed up, while you reload the solution, Visual Studio might get hang.
The Visual Studio might go hang, when there was a problem in loading the nuget packages.
In my case, VS 2013 Professional was hanging on every startup, even without opening a solution because the license was no longer valid.
Last item in the log file:
<entry>
<record>367</record>
<time>2015/07/13 20:11:05.051</time>
<type>Information</type>
<source>UserConnection</source>
<description>myemailaddrs#gmail.com signed in for IDE user</description>
</entry>
And on the msdn.microsoft.com subscription page: "Your subscription is no longer active, contact your administrator."
I had to get an updated subscription from my employer.
Deleting Test Results from my TestResults folder actually did the trick for me. Just another thing to try.
VS2012 hangs on me e.g. when opening a csproj file on a network share (in fact on a share that was on the VirtualBox host, connected as a smb share using a VirtualBox feature).
Copying the project over to a local drive fixed it for me. Not sure if assigning a drive letter would do the trick.
Also not sure why it does not work via network share, if it is a VS limitation or perhaps some plugin (I use resharper, of course).
For me this appears to have something to do with the project having the MVC 4 project type guid (E3E379DF-F4C6-4180-9B81-6769533ABE47). Removing this guid from the .csproj resolved the hanging for me. (An additional wiping of the .vs folder was required after removing the guid.)
I just removed "packages" folder from root of solution and it helped for me (Visual Studio Express 2015)
Sorry for having to create a new post instead of commenting on the selected answer .. I do not have enough rep to comment at this time.
My issue was was temporarily resolved by the "...delete the .suo file ..." solution, and as other folks pointed out, I had to delete the file every single time.
Since it (apparently) is impossible to stop the creation of the file I started to dig a little more into what the file did. In addition to saving user settings, I believe it is also saving session settings, like which files you have open when VS is closed. I suspected that my project is attempting to open a file that no longer exists and that is what is causing the hang. What fixed things on my end was to delete the .suo, open VS, open a file within my solution, build and close the solution. After doing this I have had no hangs.
tl:dr
In my case, a user setting file(.suo) was attempting to open a file in my solution that no longer existed. I resolved the issue by performing the following steps.
Delete the .suo file (for me this was in /[projectfolder]/.vs/[projectname]/v14
Open Visual Studio
Open your project
Open a file (I simply opened a random .cs file)
Build and save your solution (Simply saving may do the trick, I built by habit)
Close Visual Studio
Hope this helps someone ... we spent way too many hours on this issue :)
Lots of suggestions here and elsewhere but the only thing that permanently worked for me had to do with the start-up project I'd set. This is what I did:
Delete the .suo file as suggested elsewhere.
Start VS and open the solution. All should be well at this point.
Leave the start-up project as-is, even if it's not what you want.
Save the solution. (Possibly do as someone else suggests and open a file, clean, build/re-build, etc, but I didn't have to do any of that.)
Close the solution and exit VS.
Re-start VS and open the solution.
Change the start-up project to whatever it should be
Save the solution. (Possibly again do the open file, clean, build/re-build, etc.)
Close the solution and exit VS.
Restart VS and re-open the solution and all should be well.
This might or might not work for you but I'd tried everything I could find - registry changes, debugging VS from a second VS session, you name it - but nothing else worked for more than a single start/open.
Try to uninstall extensions with "Control Panel" or disable any add-in in [Tools]=>[Add-in Manager] then try to reopen the solution.
My problem was fixed by uninstall "Visual Localizer".
In my case the Fusion log has been enabled. Log files has been growing for months as I forgot to turn it off after investigation. This way the antivirus software started to check these big log files several times during opening the solution, and "Preparing solution..." message is visible for long-long time. When I noticed this, I turned off the fusion log, and problem solved. Solution loads in 10 seconds instead of 20 minutes.
I've had this issue multiple times, in pretty much all versions of VS. The one solution that seems to work most of the times is to delete the .vs folder located in the solution folder. Sometimes it's enough to delete the .sou file located in .vs///
The folder is hidden by the way, so you will have to enable "Show hidden files and folders"
For me the solution was to disable source control (Set plugin to None in Tools->Source Countrol). I think it was trying to sync some huge Git repo for some reason (have a couple of massive repos, but not in the tree I was trying to open).
I have fixed the issue by uninstalling these two plugins:
Productivity Power Tool
Web Essentials
I restored a previous version of the .vbproj file and it solved it.
I don't know what was in the newer version but the problem was something inside the .bvproj file itself.
I have a simple Silverlight program that displays a bunch of images. I modified it do display more images, but it when I hit "run without debugging" is keeps running the old build with fewer images. When I copy the code into a new project and run it, it works fine for the first time, but then each subsequent change is not displayed. What could be the problem? I'm using Visual Web Developer 2008 Express.
Always check "Configuration Manager" option on "Build" menu in Microsoft Visual Web Developer. The checkBox "build" has to be checked, otherwise it won't build.
Happened to me, I hope this helps others.
I just had this happen to me in VS 2013 for Web. Had to change the Project URL in:
"Project properties"
"Web" tab
"Servers"
To a different localhost number and recreate Virtual directory.
Before my Project URL was:
http://localhost:55487/
I changed it to:
http://localhost:55488/
Then clicked "Create Virtual Directory".
Would like to know why this happened in the first place.
I found that I had to close all open instances of Visual Studio before I got it working again
This happens because your cache memory is full. just go to you bin and obj folder and delete all the temporary files. Now it will run properly.
Maybe it's a caching issue (webbrowser / proxy).
To fool the browser try to embed the xap file with an additional parameter that changes every time you open the plugin:
<param name="source" value="ClientBin/BubuApp.xap?<%=Guid.NewGuid().ToString() %>"/>
If this don't help, try to clean the project (delete obj / bin folders & xap file).
I was also suffering from this issue and none of the suggestions worked. I was building a Office.js add-in and debugging was with IIS Express.
What fixed the issue for me was deleting files in
C:\Users\<user>\AppData\Local\Temp\Temporary ASP.NET
Actually, I went ahead and and deleted the entire C:\Users\<user>\AppData\Local\Temp folder out of spite :)
I also had this issue and while some of the fixes above helped temporarily, the one that worked for me was to remove the history and caching in Internet Options.
Go into Internet Option (also available in VS via Tools > options > Environment > Web Browser > Internet Explorer Options).
On the General tab click Settings in the Browsing History section.
On the Temporary Internet Files page select Every time I start
Internet Explorer
On the History tab set the Days to keep history to 0
On the Caches and Database tab make sure Allow website caches and
databases is NOT ticked.
I'm not sure if all of the above are required, but I've made a number of changes to files and so far they have been reflected straight away in the dynamic versions without any noticeable performance problems.
I've also since realised if I set 'Every time I visit the webpage' instead of 'Every time I start Internet Explorer' I don't have to stop and restart the project to see the changes. Which is how it should be!
I used to suffer this. All of this used to be (for me) a folder's contents issue.
Maybe you can check this:
Delete %windir%\microsoft.net\framework\v4.0xxx\Temporary
IIS Express: even if you change the output file for compiled results, you will see in applicationhost.config that many times IISExpress is really "looking" to the default bin folder of your project.
It is even possible that you have different configurations for Debug or Release, so maybe IIS is looking BIN with Release code, and you are now compiling in Debug to another folder, do you understand me?
Happened to me too. Well i dont know the exact reason for this behavior. But when i close the visual C express 10 and then open again and build it builds the new saved file. I guess it still hangs on to the old file when there is an error in some debug mode or something.
Stop all incntance of VS.
Delete all /bin, not just /bin/Debug. All /bin
Remove user option .suo file in solution dir. It will create on self.
Remove all restore windows point
Stop IIS.
6 Start IIS after 1 minutes.
Rebuild solution, Buid projects
It happing on me too. Very nasty. You may restart your computer.
Check for global asembly dll.
Just delete folder 'Release' in project with old code build.
I had the same problem and none of the answers were working for me. It turns out that building the ASP.Net project did not build the Silverlight project, so running without debugging didn't update the Silverlight.
Fix: Right click the Asp.Net project. Build Dependencies > Project Dependencies. Check the Silverlight project. Now building should work.
If this is a web application, change the Project URL with a new port number.
Example :
Change from http://localhost:3688/
To http://localhost:36881/
To do this:
Navigate to Project properties -> Web
Change the URL
Hit "Create Virtual Directory"
Finally, Build and RUN
I had this issue in a web site.
The site referenced 1 of the projects in the solution, and changes to it would not reflect in the debug.
Issue was a third project was referencing an outdated dll of the same same referenced project.
I removed the project and all references in other projects and readded and re-referenced everything and it worked fine.
Check you haven't got two versions of whichever file you're updating (one for one group of users, one for a different group of users).
In my case(VS 2015) it was because of the missing dll in the .exe directory... I made a "clean solution", then additionally deleted all bin and obj folders' contents. Reason to do so was VS keeping to load old dll build. Solution was to select folder of the running debug config, i.e. everytime I rebuild project destination location with dll and a reference to it stays with warning mark for some time until intellitrace does its job. After doing the setup mentioned above, I still have to do a manual rebuild on a project that generates a dll into specified dir. Pressing F5 does nothing, I don't have time to find out why... Main thing is its working for me
I had this recently too and I didn't see the answer here. I was changing an MMI to get rid of redundant buttons, and they didn't go away.
Really old legacy code. To make it keep user settings - like language - someone had made it keep the Settings. I was not allowed to change this, they want it like that.
To get rid of the old settings and allow new ones:
open regedit
navigate to HKEY_CURRENT_USER - Software - MyProject - SubProject
here you see Recent File List and Settings.
Delete Settings completely - don't worry, it will make a new one.
Please check is there any old .tlb file present in someother folder. In my case i was using the .tlb file generated using .NET dll and then created the .tlb file using RegAsm. I tried to use the .tlb file in vb6 code, it still refers old code only. After a long search i found same .tlb file older version found in Visual Studio\VB98 folder. I removed it then it worked fine. This may not be relevent for this issue but could give you another way of thinking
There is a scroll bar at the top which has 3 options:
debug
release
configuration manager
Make sure release is selected.
I had to clear browsing data and it worked in my case
I'm unable to debug a WinForms C# application using the released version of Visual Studio 2010 Prof.
I get the following error message after the second debugging run.
Error 9 Unable to copy file "obj\x86\Debug\Arrowgrass Reports.exe" to "bin\Debug\Arrowgrass Reports.exe". The process cannot access the file 'bin\Debug\Arrowgrass Reports.exe' because it is being used by another process.
I've tried a pre-build script to attempt to delete this file, but it's locked by Visual Studio.
There are a few references to this on the net so it is a know problem. Does anyone have a hotfix or effective work-around?
I have found this issue very easy to reproduce, and the fix for me is a variation on Richard Fors' answer. If I have a UserControl open in the designer, run the debugger, and then edit the UserControl, the subsequent rebuild will fail. If I close the UserControl before running the debugger I never get this error, so I just make sure to close the designer window before hitting F5.
As of October 2012, I still have that issue so the VS 2010 SP1 didn't solve the problem. What I did, and worked consistently, was disabling the hosting process in the projects.
To disable the hosting process:
. Open a project in Visual Studio.
. On the Project menu, click Properties.
. Click the Debug tab.
. Clear the Enable the Visual Studio hosting process check box.
Source:
http://msdn.microsoft.com/en-us/library/ms185330(v=vs.100).aspx
You can try to kill the vshost.exe process:
taskkill /F /IM "Arrowgrass Reports.vshosts.exe"
You might also be lucky and simply be able to move the file in question. Moving the file can be done by adding the following lines of code to the pre-build event of your project:
if exist "$(TargetPath).locked" del "$(TargetPath).locked"
if exist "$(TargetPath)" if not exist "$(TargetPath).locked" move "$(TargetPath)" "$(TargetPath).locked"
Disabling windows search did not fix for me. However disabling Antivirus did (our Antivirus is Symantec Endpoint Protection 11)
As such, I was able to fix this for myself by changing the Debug settings in the project to point the working folder to a path on the C: drive, and then excepting that path from the antivirus auto-protect scan settings.
I hope this helps someone.
I posted this answer in a similar question but figured I'd also say it here:
Alright... this might sound pretty crazy.
I've had this problem in VS2010 for the last couple of years. The workaround mentioned here works for me, but a lot of times I forgot to close all my forms/usercontrols first.
I've discovered that merely going to view the open files via:
Computer Management (compmgmt.msc)->Shared Folders->Open Files
will "Free up" whichever file is being locked. Very strange, but it works for me!
In my case, I did Project Properties-->Security Tab-->Uncheck Click-Once security settings (If it is checked). It worked for me. In my project, it was showing this error for a C++ dll being used in my C# project.
The condition described can also be caused by the offending DLL or EXE referencing itself; in which case the Process Explorer test described previously never returns a match (e.g. it's not running). This unexpected situation seems to be caused during some sequence of operations in VS2010 (and likely all previous versions) which insidiously adds the reference behind the scenes. The specific cause of this hasn't been tracked down (or resolved that I know of). To check for, and resolve this error simply make sure the offending DLL or EXE is not listed as a reference to itself.
Got the error ("The process cannot access the file … because it is being used by another process") when I modified the (Visual Studio 2010 C# Express with SP1) solution from two large (10 source files, ~500 lines per file) projects with one referencing the other, to lots (6) of smaller projects with lots of projects referencing other projects.
The references were to the dll- and exe files (the Debug versions of them), NOT to the projects even though the projects were in the same solution.
I then learned that references should be to projects, not files, for F12 to work properly. So I modified the references. That made F12 work (jump to the source file instead of some auto-generated interface description), and at the same time the "cannot access file" error during build disappeared.
I only got the "cannot access file" error when doing Release builds. The references were to the Debug versions of exe/dll's. I suspect that this mixing is what triggers the bug in VS.
I encountered this issue when developing windows services. I found out that it happens when the service is running. Thus, you only need to stop the service (from the services.msc console) and you're good to go !
Hope this helps.
Tidjani.
Check Task Manager for the specified process and End the process explicitly. This solution worked for me.
I cant' write to a comment since not at 50 points but for me I excluded my project folder in ESET Enpoint Security ver 5. Seems like it blocked/hogged some files. My Error did not state which exe or file was in use so it took a long time to finally get to what JoeC said about Antivirus and tried it. Seems to be working now (Visual Studio 2010 SP1)
Closing recently changed User Controls solved the problem in my scenario. Hope this will help somebody out there.
Looks like this issue has (finally!) been fixed in the VS2010 SP1
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=75568aa6-8107-475d-948a-ef22627e57a5&displaylang=en
Please try uninstalling Windows Live SYNC. Does it still happen?
I think I just found the culprit and the solution.
Go to services and stop & disable the "windows search" service.
That solved the problem for me now.
For me the solution was to change the startup project to a dll (problem only occurs in debug mode when having an application as the startup project). If your solution contains several projects (and it will, and it will contain a .dll, else you would not get the problem), switch to that .dll, no .vshost.exe, no problem.
Also, killing .vshost.exe did not work for me, since immediately after starting again, it had locked the .dll.
Also, make sure to have your references clean, especially in more complex projects, and also prefer project references to assembly references, and so on. I suppose bad references (circular and similar) are bound to cause problems, at least so I have read.
A short article by me on this problem (and my solution)
How to "clean up" your references in a solution
Adding the following to the Pre-build event of the shared dll worked for me:
if exist "$(TargetPath).locked*" del "$(TargetPath).locked*"
set exitprebuildfor$(ProjectName)=
for /l %%a in (1,1,10) do (
if defined exitprebuildfor$(ProjectName) goto :ok
if not exist "$(TargetPath).locked%%a" if exist "$(TargetPath)" move "$(TargetPath)" "$(TargetPath).locked%%a" & set exitprebuildfor$(ProjectName)=1)
:ok
set exitprebuildfor$(ProjectName)=
It's based on the solution given here but instead of just renaming the dll to .locked it keeps trying to rename it to .locked1, locked2. Using 10 I usually run into the problem once a day, but ant value can be used.
Simply make a copy of the whole project and run project from the new copy.... it will work fine.
But you will have to end process of the debug somehow in-order to delete the older project.
Stop IIS service and try building it again or if you can afford to restart your pc, give it a try. Worked for me both ways.
Cheers
My problem was that Outlook 2010 (outlook.exe) was using the same port as my ASP.NET MVC project with IIS express.
Solution: close outlook.exe, run your solution and open outlook again (so that it uses another port).
Hopefully this helps somebody, because I received the same error message as described in this topic.
Try deleting .exe file in debug or release folder (whatever you working on)
Windows will prompt that the process X has opened this and you can't delete it
after that go to task manager and in details tab end task X process
Delete obj file.And stop your service and Restart again.Then you may solve the problem
The best solution for me was to move my project files out of My Documents - which is on a server managed by the IT department - and locate them locally on my C drive. Also working: unchecking the "Enable the Visual Studio hosting process" checkbox, as stated by other people.
If you are working on a C# project which is using reference of C DLL, then you can eliminate the error by checking the Allow unsafe code check box. I know I have not used pointers in my C# project but I was using some bitwise operator in C#. May be these C-like features morphed it as 'Unsafe' code.
What worked for me was removing "read only" status on the bin folder. Once I did that, it has worked ever since.
I've had this error when the project is on a remote share (like, if your $env:homepath is helpfully redirected by your IT department to a network share). Make sure your project is resident on a local drive.
My problem started after creating a custom control and drag and drop it to the toolbox palette for use it in design forms. First appeared a warning saying that there was a redundance between the custom control source file (.cs) and the projects executable (.exe). On executing/debugging appeared the error: unable to access the (.exe) because it's being used (and it was true).
A literally removed the whole source code regarding the custom control and last problem never stopped, until I checked out the references and it was referencing itself in order to be "able to" get the former custom control. I removed the reference and done!!
So: just check the references and remove the self-reference to the project.
Delete your Bin folder and run the application.
This worked for me. :)
Simply turn off Visual Studio hosting in debug, run the project and again re on it and run project.
Open a project in Visual Studio.
. On the Project menu, click Properties.
. Click the Debug tab.
. Clear the Enable the Visual Studio hosting process check box
For Windows Project
The Visual Studio hosting process can hold the executable file pointer. To stop the host instance, open the Project properties and then go to Debug tab. Now uncheck the Enable the Visual Studio hosting Process option and then check the checkbox again to debug.
For web project
The IIS can hold the file pointer. Restarting the IIS can solve the issue.