I have a variable that contains a complete path name. I am trying to conditionally replace the last occurrence of a word in the path. Example script to show what I am trying
#!/bin/sh
testvar="/home/downloads/user/downloads"
if [ "$1" = "alternate" ]; then
newtestvar=$(echo $testvar | sed -e 's/\(.*\)downloads$/\1alternate_downloads/g')
else
newtestvar=$(echo $testvar | sed -e 's/\(.*\)downloads$/\1new_downloads/g')
fi
echo "testvar:" $testvar
echo "newtestvar:" $newtestvar
Run #1
$ ./foofile
testvar: /home/downloads/user/downloads
newtestvar: /home/downloads/user/new_downloads
Run #2
$ ./foofile alternate
testvar: /home/downloads/user/downloads
newtestvar: /home/downloads/user/alternate_downloads
I do get the intended result, but I am looking for a way to avoid the if/else and rather achieve the result by checking the $1 in context of sed.
Edit-1
I replaced the if/else block with following shorthand. but it looks really clumsy and difficult to read.
newtestvar=$([[ $1 = "alternate" ]] && echo $testvar | sed -e 's/\(.*\)downloads$/\1alternate_downloads/g' || echo $testvar | sed -e 's/\(.*\)downloads$/\1new_downloads/g')
You can avoid sed and handle this in bash itself:
#!/bin/bash
testvar="/home/downloads/user/downloads"
# default s to "new"
s="${1:-new}"
# replace only last value of downloads
newtestvar="${testvar/%downloads/${s}_downloads}"
# examine both variables
declare -p testvar newtestvar
Now call it as:
./foofile
declare -- testvar="/home/downloads/user/downloads"
declare -- newtestvar="/home/downloads/user/new_downloads"
./foofile alternate
declare -- testvar="/home/downloads/user/downloads"
declare -- newtestvar="/home/downloads/user/alternate_downloads"
This can probably not be done with sed, because sed has no way to test the value of a variable and then conditionally branch the execution.
However, it can be done with AWK:
#!/bin/sh
testvar="/home/downloads/user/downloads"
newtestvar=$(awk -v arg="$1" '{
replacement = arg == "alternate" ? "alternate_downloads" : "new_downloads";
sub("downloads$", replacement);
print $0;
}
' <<<"$testvar")
echo "testvar:" $testvar
echo "newtestvar:" $newtestvar
Related
I have a string:
foo="re-9619-add-selling-office";
I'd like to break up the string on the second - (dash) into variable1 and variable2. I want to end up with variable1=re-9619 and variable2=add-selling-office
I tried it using grep and awk, but now I not sure that's the way to go.
Here is a single sed + read way:
foo="re-9619-add-selling-office"
read var1 var2 < <(sed -E 's/^([^-]*-[^-]*)-/\1 /' <<< "$foo")
# check variables
declare -p var1 var2
declare -- var1="re-9619"
declare -- var2="add-selling-office"
Could you please try following once. Where first variable will have value like re-9619 and second shell variable will have value like add-selling-office
first=$(echo "$foo" | sed 's/\([^-]*-[^-]*\)-.*/\1/')
second=$(echo "$foo" | sed 's/\([^-]*\)-\([^-]*\)-\(.*\)/\3/')
Explanation:
echo "$foo" | sed 's/\([^-]*-[^-]*\)-.*/\1/': Printing value of foo variable and passing its output to sed command. In sed I am using substitute capability to perform substitution, \([^-]*-[^-]*\)-.*(which has everything from starting of value to till 2nd occurrence of - in back reference in it). Then substituting whole value with 1st captured back reference value which will become only re-9619.
echo "$foo" | sed 's/\([^-]*\)-\([^-]*\)-\(.*\)/\3/': Logic is same as above mentioned command. Using sed's capability of substitution with using back reference capability of it. Here we are printing everything after 2nd occurrence of -.
NOTE: second=$(echo "$foo" | sed -E "s/$first-(.*)/\1/") could also help as per #User123's comments.
That can be done using parameter expansions, you don't need an external utility.
$ foo="re-9619-add-selling-office"
$ variable2=${foo#*-*-}
$ variable1=${foo%-"$variable2"}
$
$ echo $variable1
re-9619
$ echo $variable2
add-selling-office
You can use cut:
variable1=$(echo $foo | cut -d '-' -f 1-2)
variable2=$(echo $foo | cut -d '-' -f 3-)
This is the result:
>> echo $variable1
re-9619
>> echo $variable2
add-selling-office
I'm relatively new to bash scripting and I would like someone to explain this properly, thank you. Here is my code:
#! /bin/bash
echo "first arg: $1"
echo "first arg: $2"
var="$( grep -rnw $1 -e $2 | cut -d ":" -f1 )"
var2=$( grep -rnw $1 -e $2 | cut -d ":" -f1 | awk '{print substr($0,length,1)}')
echo "$var"
echo "$var2"
The problem I have is with the output, the script I'm trying to write is a c++ function searcher, so upon launching my script I have 2 arguments, one for the directory and the second one as the function name. This is how my output looks like:
first arg: Projekt
first arg: iseven
Projekt/AX/include/ax.h
Projekt/AX/src/ax.cpp
h
p
Now my question is: how do can I save the line by line output as a variable, so that later on I can use var as a path, or to use var2 as a character to compare. My plan was to use IF() statements to determine the type, idea: IF(last_char == p){echo:"something"}What I've tried was this question: Capturing multiple line output into a Bash variable and then giving it an array. So my code looked like: "${var[0]}". Please explain how can I use my line output later on, as variables.
I'd use readarray to populate an array variable just in case there's spaces in your command's output that shouldn't be used as field separators that would end up messing up foo=( ... ). And you can use shell parameter expansion substring syntax to get the last character of a variable; no need for that awk bit in your var2:
#!/usr/bin/env bash
readarray -t lines < <(printf "%s\n" "Projekt/AX/include/ax.h" "Projekt/AX/src/ax.cpp")
for line in "${lines[#]}"; do
printf "%s\n%s\n" "$line" "${line: -1}" # Note the space before the -1
done
will display
Projekt/AX/include/ax.h
h
Projekt/AX/src/ax.cpp
p
I have a variable foo.
echo "print foo" "$foo" ---> abc,bc,cde
I wanted to put quotes around each variable.
Expected result = 'abc','bc','cde'.
I have tried this way, but its not working:
join_lines() {
local IFS=${1:-,}
set --
while IFS= read -r line; do set -- "$#" "$'line'"; done
echo "$*"
}
Could you please try following, strictly written and tested with shown samples in GNU awk.
Without loop:
var="abc,bc,cde"
echo "$var" | awk -v s1="'" 'BEGIN{FS=",";OFS="\047,\047"} {$1=$1;$0=s1 $0 s1} 1'
With loop usual way to go through all fields(comma separated):
var="abc,bc,cde"
echo "$var" | awk -v s1="'" 'BEGIN{FS=OFS=","} {for(i=1;i<=NF;i++){$i=s1 $i s1}} 1'
Output will be 'abc','bc','cde'.
As alternative, using 'sed: replacing every 'with'', and adding ' at the beginning and end of the line to wrap the first/last tokens.
sed -e "s/^/'/" -e "s/$/'/" -e "s/,/','/g"
On surface, the question is on how to convert comma separated list of values (stored in a shell variable) into a comma separate list of quoted tokens. Extending the logic provided by OP, but using shell arrays
foo="abc,bc,cde"
IFS=, read -a items <<< "$foo"
result=
for r in "${items[#]}" ; do
[ "$result" ] && result+=","
result+="'$r'"
done
echo "RESULT=$result"
If needed, logic can be placed into a function/filter
function join_lines {
local -a items
local input result
while IFS=, read -a items ; do
result=
for r in "${items[#]}" ; do
[ "$result" ] && result+=","
result+="'$r'"
done
echo "$result"
done
}
Suppose I have a Unix shell variable as below
variable=abc,def,ghij
I want to extract all the values (abc, def and ghij) using a for loop and pass each value into a procedure.
The script should allow extracting arbitrary number of comma-separated values from $variable.
Not messing with IFS
Not calling external command
variable=abc,def,ghij
for i in ${variable//,/ }
do
# call your procedure/other scripts here below
echo "$i"
done
Using bash string manipulation http://www.tldp.org/LDP/abs/html/string-manipulation.html
You can use the following script to dynamically traverse through your variable, no matter how many fields it has as long as it is only comma separated.
variable=abc,def,ghij
for i in $(echo $variable | sed "s/,/ /g")
do
# call your procedure/other scripts here below
echo "$i"
done
Instead of the echo "$i" call above, between the do and done inside the for loop, you can invoke your procedure proc "$i".
Update: The above snippet works if the value of variable does not contain spaces. If you have such a requirement, please use one of the solutions that can change IFS and then parse your variable.
If you set a different field separator, you can directly use a for loop:
IFS=","
for v in $variable
do
# things with "$v" ...
done
You can also store the values in an array and then loop through it as indicated in How do I split a string on a delimiter in Bash?:
IFS=, read -ra values <<< "$variable"
for v in "${values[#]}"
do
# things with "$v"
done
Test
$ variable="abc,def,ghij"
$ IFS=","
$ for v in $variable
> do
> echo "var is $v"
> done
var is abc
var is def
var is ghij
You can find a broader approach in this solution to How to iterate through a comma-separated list and execute a command for each entry.
Examples on the second approach:
$ IFS=, read -ra vals <<< "abc,def,ghij"
$ printf "%s\n" "${vals[#]}"
abc
def
ghij
$ for v in "${vals[#]}"; do echo "$v --"; done
abc --
def --
ghij --
I think syntactically this is cleaner and also passes shell-check linting
variable=abc,def,ghij
for i in ${variable//,/ }
do
# call your procedure/other scripts here below
echo "$i"
done
#/bin/bash
TESTSTR="abc,def,ghij"
for i in $(echo $TESTSTR | tr ',' '\n')
do
echo $i
done
I prefer to use tr instead of sed, becouse sed have problems with special chars like \r \n in some cases.
other solution is to set IFS to certain separator
Another solution not using IFS and still preserving the spaces:
$ var="a bc,def,ghij"
$ while read line; do echo line="$line"; done < <(echo "$var" | tr ',' '\n')
line=a bc
line=def
line=ghij
Here is an alternative tr based solution that doesn't use echo, expressed as a one-liner.
for v in $(tr ',' '\n' <<< "$var") ; do something_with "$v" ; done
It feels tidier without echo but that is just my personal preference.
The following solution:
doesn't need to mess with IFS
doesn't need helper variables (like i in a for-loop)
should be easily extensible to work for multiple separators (with a bracket expression like [:,] in the patterns)
really splits only on the specified separator(s) and not - like some other solutions presented here on e.g. spaces too.
is POSIX compatible
doesn't suffer from any subtle issues that might arise when bash’s nocasematch is on and a separator that has lower/upper case versions is used in a match like with ${parameter/pattern/string} or case
beware that:
it does however work on the variable itself and pop each element from it - if that is not desired, a helper variable is needed
it assumes var to be set and would fail if it's not and set -u is in effect
while true; do
x="${var%%,*}"
echo $x
#x is not really needed here, one can of course directly use "${var%%:*}"
if [ -z "${var##*,*}" ] && [ -n "${var}" ]; then
var="${var#*,}"
else
break
fi
done
Beware that separators that would be special characters in patterns (e.g. a literal *) would need to be quoted accordingly.
Here's my pure bash solution that doesn't change IFS, and can take in a custom regex delimiter.
loop_custom_delimited() {
local list=$1
local delimiter=$2
local item
if [[ $delimiter != ' ' ]]; then
list=$(echo $list | sed 's/ /'`echo -e "\010"`'/g' | sed -E "s/$delimiter/ /g")
fi
for item in $list; do
item=$(echo $item | sed 's/'`echo -e "\010"`'/ /g')
echo "$item"
done
}
Try this one.
#/bin/bash
testpid="abc,def,ghij"
count=`echo $testpid | grep -o ',' | wc -l` # this is not a good way
count=`expr $count + 1`
while [ $count -gt 0 ] ; do
echo $testpid | cut -d ',' -f $i
count=`expr $count - 1 `
done
my question seems to be general, but i can't find any answers.
In sed command, how can you replace the substitution pattern by a value returned by a simple bash function.
For instance, I created the following function :
function parseDates(){
#Some process here with $1 (the pattern found)
return "dateParsed;
}
and the folowing sed command :
myCatFile=`sed -e "s/[0-3][0-9]\/[0-1][0-9]\/[0-9][0-9]/& parseDates &\}/p" myfile`
I found that the caracter '&' represents the current pattern found, i'd like it to be passed to my bash function and the whole pattern to be substituted by the pattern found +dateParsed.
Does anybody have an idea ?
Thanks
you can use the "e" option in sed command like this:
cat t.sh
myecho() {
echo ">>hello,$1<<"
}
export -f myecho
sed -e "s/.*/myecho &/e" <<END
ni
END
you can see the result without "e":
cat t.sh
myecho() {
echo ">>hello,$1<<"
}
export -f myecho
sed -e "s/.*/myecho &/" <<END
ni
END
Agree with Glenn Jackman.
If you want to use bash function in sed, something like this :
sed -rn 's/^([[:digit:].]+)/`date -d #&`/p' file |
while read -r line; do
eval echo "$line"
done
My file here begins with a unix timestamp (e.g. 1362407133.936).
Bash function inside sed (maybe for other purposes):
multi_stdin(){ #Makes function accepet variable or stdin (via pipe)
[[ -n "$1" ]] && echo "$*" || cat -
}
sans_accent(){
multi_stdin "$#" | sed '
y/àáâãäåèéêëìíîïòóôõöùúûü/aaaaaaeeeeiiiiooooouuuu/
y/ÀÁÂÃÄÅÈÉÊËÌÍÎÏÒÓÔÕÖÙÚÛÜ/AAAAAAEEEEIIIIOOOOOUUUU/
y/çÇñÑߢÐð£Øø§µÝý¥¹²³ªº/cCnNBcDdLOoSuYyY123ao/
'
}
eval $(echo "Rogério Madureira" | sed -n 's#.*#echo & | sans_accent#p')
or
eval $(echo "Rogério Madureira" | sed -n 's#.*#sans_accent &#p')
Rogerio
And if you need to keep the output into a variable:
VAR=$( eval $(echo "Rogério Madureira" | sed -n 's#.*#echo & | desacentua#p') )
echo "$VAR"
do it step by step. (also you could use an alternate delimiter , such as "|" instead of "/"
function parseDates(){
#Some process here with $1 (the pattern found)
return "dateParsed;
}
value=$(parseDates)
sed -n "s|[0-3][0-9]/[0-1][0-9]/[0-9][0-9]|& $value &|p" myfile
Note the use of double quotes instead of single quotes, so that $value can be interpolated
I'd like to know if there's a way to do this too. However, for this particular problem you don't need it. If you surround the different components of the date with ()s, you can back reference them with \1 \2 etc and reformat however you want.
For instance, let's reverse 03/04/1973:
echo 03/04/1973 | sed -e 's/\([0-9][0-9]\)\/\([0-9][0-9]\)\/\([0-9][0-9][0-9][0-9]\)/\3\/\2\/\1/g'
sed -e 's#[0-3][0-9]/[0-1][0-9]/[0-9][0-9]#& $(parseDates &)#' myfile |
while read -r line; do
eval echo "$line"
done
You can glue together a sed-command by ending a single-quoted section, and reopening it again.
sed -n 's|[0-3][0-9]/[0-1][0-9]/[0-9][0-9]|& '$(parseDates)' &|p' datefile
However, in contrast to other examples, a function in bash can't return strings, only put them out:
function parseDates(){
# Some process here with $1 (the pattern found)
echo dateParsed
}