I want to schedule data flow in daily base through nifi.
For Example,
I need to run schedule on 9.00 AM in every morning.
Can anyone tell me what is procedure to make schedule data flow
There are three scheduling strategy available, see below details
Timer driven: This is the default mode. The Processor will be scheduled to run on a regular interval. The interval at which the Processor is run is defined by the ‘Run schedule’ option (see below).
Event driven: When this mode is selected, the Processor will be triggered to run by an event, and that event occurs when FlowFiles enter Connections feeding this Processor. This mode is currently considered experimental and is not supported by all Processors. When this mode is selected, the ‘Run schedule’ option is not configurable, as the Processor is not triggered to run periodically but as the result of an event. Additionally, this is the only mode for which the ‘Concurrent tasks’ option can be set to 0. In this case, the number of threads is limited only by the size of the Event-Driven Thread Pool that the administrator has configured.
CRON driven: When using the CRON driven scheduling mode, the Processor is scheduled to run periodically, similar to the Timer driven scheduling mode. However, the CRON driven mode provides significantly more flexibility at the expense of increasing the complexity of the configuration. The CRON driven scheduling value is a string of six required fields and one optional field, each separated by a space.
You typically specify values one of the following ways:
Number: Specify one or more valid value. You can enter more than one value using a comma-separated list.
Range: Specify a range using the - syntax.
Increment: Specify an increment using / syntax. For example, in the Minutes field, 0/15 indicates the minutes 0, 15, 30, and 45.
You should also be aware of several valid special characters:
* — Indicates that all values are valid for that field.
? — Indicates that no specific value is specified. This special character is valid in the Days of Month and Days of Week field.
L — You can append L to one of the Day of Week values, to specify the last occurrence of this day in the month. For example, 1L indicates the last Sunday of the month.
For example:
The string 0 0 13 * * ? indicates that you want to schedule the processor to run at 1:00 PM every day.
The string 0 20 14 ? * MON-FRI indicates that you want to schedule the processor to run at 2:20 PM every Monday through Friday.
The string 0 15 10 ? * 6L 2011-2017 indicates that you want to schedule the processor to run at 10:15 AM, on the last Friday of every month, between 2011 and 2017.
For your schedule time should be like below;
0109*?** - this meaning every 1 seconds 09 minutes is morning 9 AM other * fields run every day and month.
I hope it helps you!!!
Scheduling Strategy: CRON driven
Run Schedule: 0 0 9 * * ? *
Related
My Oracle DBA have setup a task with following repeat_interval:
Start Date :"30/JAN/20 08:00AM"
Repeat_interval: "FREQ=DAILY; INTERVAL=0; BYMINUTE=15"
Can I ask what is "Interval=0" means?
Does it means this task will run daily from 8AM, and will repeat every 15 mins until success?
I tried to get the answer from Google, but what I find is what is Interval=1, but nothing for 0.
So would be great if anyone can share me some light here.
Thanks in advance!
INTERVAL is the number of increments of the FREQ value between executions. I believe in this case that a value of 0 or 1 would be the same. The schedule as shown would execute once per day (FREQ=DAILY), at approximately 15 minutes past a random hour (BYMINUTE=15, but BYHOUR and BYSECOND are not set).
Schedule has nothing to do with whether or not the previous execution succeeded or not. Start Date is only the date at which the job was enabled, not when it actually starts processing.
If you want it to run every 15 minutes from the moment you enable it, you should set as follows:
FREQ=MINUTELY; INTERVAL=15
If you want it to run exactly on the quarter hour, then this:
FREQ=MINUTELY; BYMINUTE=0,15,30,45; BYSECOND=0
If you want it to run every day at 8am, then this:
FREQ=DAILY; BYHOUR=8; BYMINUTE=0; BYSECOND=0
I'm using Laravel 5.8 and I like to auto-generate Invoices should be generated auto from Monday - Sunday.
every Sunday night at 23:59:00
Let's say I have
"23:59:00 according to the region time zone".
Every store is related to a region, from the region table you'll find the time zone.
Questions
How should I set the CRON JOB so I can generate invoices automatically according to the list of timezone I will get from the table?.
I have two suggestions;
if you want it to be static, define each command with the corresponding timezone from your database. Different timezones may have same time such as Europe/Amsterdam and Europe/Berlin
$schedule->command('generate:report')->timezone('one-of-the-timezone')->at('23:59');
$schedule->command('generate:report')->timezone('another-timezone')->at('23:59');
$schedule->command('generate:report')->timezone('yet-another-timezone')->at('23:59');
$schedule->command('generate:report')->timezone('some-other-timezone')->at('23:59');
If you want it to be dynamic, make it run every 59. min hourly and try to match it with the timezones via using hour.
$schedule->command('generate:report')->hourlyAt(59);
Inside your command class;
public function handle(TimezoneRepository $timezoneRepository)
{
$timezones = $timezoneRepository->getUniqueTimezones(); // the unique timezones in your database - cache if you want
foreach ($timezones as $timezone) {
$date = Carbon::now($timezone); // Carbon::now('Europe/Moscow'), Carbon::now('Europe/Amsterdam') etc..
if ($date->hour === 23) { // you are in that timezone
$currentTimezone = $date->getTimezone();
dispatch(new ReportMaker($currentTimezone)); // dispatch your report maker job
}
}
}
With the dynamic one, you will hit to multiple timezones at one iteration(when generate:report is executed) as i said at then beginning.
one of the possible flaw may be; if the execution of getting timezones etc takes more than 1 minute you may be in 00:00 instead of 23:59. It is better to calculate your report asynchronous and cache the list of timezones to not face problems while executing this loop.
Another possible flaw;
According to wiki;
A few zones are offset by 30 or 45 minutes (e.g. Newfoundland Standard Time is UTC−03:30, Nepal Standard Time is UTC+05:45, Indian Standard Time is UTC+05:30 and Myanmar Standard Time is UTC+06:30).
If you want to cover any of these, then it is better to execute the command like this
$schedule->command('generate:report')->cron('14,29,44,59 * * * *');
and make both hour and minute comparison such as;
$date->hour === 23 && $date->hour === 59
You can use the timezone() method in your task Schedulding
Using the timezone method, you may specify that a scheduled task's
time should be interpreted within a given timezone:
$schedule->command('report:generate')
->timezone('America/New_York')
->at('02:00')
It is not clear how to enter a duration when scheduling a firewall rule.
In particular I am trying to enter a firewall rule that should only be
active at certain times of the day.
The starting value is a time entry that is uses 24 hour notation.
The end value is not clear on how to enter values.
The default value for this field is "1d 00:00:00".
The starting field is a set time using 24 hour notation, and the ending field value is a duration, in this format:
days, hours minutes and seconds.
e.g.
"days" "hours":"minutes":"seconds"
1d 8h:23:00
This means from the start time "plus" 1 day, 8 hours and 23 minutes.
I have a spring batch application and i am using CRON to set how often this application runs. But the problem i am running into is that i want to run the job on specific hours
3 am
7 am
11 am
3 pm
7 pm
11 pm
As you can see it is every 4 hours but starts at 3 am so i cannot use */4 in the hours section of the timing format as this would start the job at 4am
I have also tried '3,7,11,15,19,23' in the hours section but this does not work either (guessing it only works in the minutes section). Does someone know how i can do this?
Use
#Scedule(cron="0 0 3/4 * * ?")
The Pattern x/y means: where <timepart> mod y = x
or
#Scedule(cron="0 0 3,7,11,15,19,21 * * ?")
According to the Quartz Cron Trigger Tutorial:
The '/' character can be used to specify increments to values. For
example, if you put '0/15' in the Minutes field, it means 'every 15th
minute of the hour, starting at minute zero'. If you used '3/20' in
the Minutes field, it would mean 'every 20th minute of the hour,
starting at minute three' - or in other words it is the same as
specifying '3,23,43' in the Minutes field. Note the subtlety that
"/35" does *not mean "every 35 minutes" - it mean "every 35th minute
of the hour, starting at minute zero" - or in other words the same as
specifying '0,35'.
0 0 3,7,11,15,19,23 * * ?
Fires for 0 minute starting at 3am and ending at 23:00 pm every day.
judging by the two answers above the error i was making was i was keeping the apostrophe at the start and end of my hours... very silly
i managed to solve this by using 3-23/4 for the hour as this starts from 3am and then every other fourth hour (just a different way of doing it to the other answers)
I have a spring application that uses quartz cron trigger. I have given the following for frequency 0 0/20 * * * ?.....once every 20 min. But i want the first one to run immediately. Right now, when I start the application, it runs after 20 min. I was hoping it would run asap and then after 20 min.
Thanks in advance.
It sounds like you want to use an interval trigger (SimpleTrigger in Quartz can do the job).
The CronTrigger wants you to specify the minutes at which to run.
So your trigger schedule says: start at 0 minutes, and run every 20 minutes after that until the hour is over. Then start at 0 again.
But with the SimpleTrigger, you say - start now and run every 20 minutes.
Here is a tutorial on SimpleTrigger:
http://quartz-scheduler.org/documentation/quartz-2.x/tutorials/tutorial-lesson-05
Here is a tutorial on CronTrigger:
http://quartz-scheduler.org/documentation/quartz-1.x/tutorials/crontrigger
You don't need CRON expression (and Quartz at all!) to run given code every 20 minutes. Just use fixed rate (Spring built-in):
#Scheduled(fixedRate=20 * 60 * 1000)
That's it! By default first invocation happens immediately, second after 20 minutes. Since Spring 3.2 you can even say initialDelay=10000 to run for the first time after exactly 10 seconds.
If you really want to use Quartz, check out SimpleTrigger.