i have problem in Visual Studio 2019 when i run my project in my pc. It can run very well. But when i share my project to my instructor, she couldn't run it and error was occur. The error said " 'Microsoft .ACE.OLEDB.12.0' provider is not registered on local machine. any solution from this problem?
She needs to install the ACE drivers freely downloadable from Microsoft. See https://www.microsoft.com/en-us/download/details.aspx?id=13255
You need to ensure that if you compiled your project as x86 (32 bit) the the 32 bit ACE driver needs to be installed? If compiled as 64 bit, then 64 bit ACE driver should be installed.
Long time reader first time poster here.
I'm a Linux developer trying to get started on Windows development in my new job. I knew it would not be trivial but the first thing I'm trying to do is complete and integrate a netvmini port driver (started by a co-op student) into one of their C++ apps. I am struggling to get the build environment going...
The project was started in Visual Studio 2013 with a Windows 7 target. When I now open it in Visual Studio 2015 and try to build the solution I get:
"Unknown or unsupported property value Win7 for TargetVersion"
for each project. This also happens if I set the configuration to Win8 (both release and debug). If I set it to Win 8.1 I get:
"An SDK corresponding to WDK version '8.1' was not found. Please install the SDK before building"
I have installed every WDK and SDK I can lay my hands on from Windows 7 to Windows 10 using both the web and the VS2015 installer. I have even installed Visual Studio 2013 again but I can't even seem to get the WDK to integrate with that.
The end goal here is to be able to build this (and hopefully debug remotely in kernel mode) from my Windows 10/VS2015 workstation for targets from Windows 7-10. Any advice or documentation that details how to integrate new build platforms into VS would be helpful (all the MS documentation just tells me what I can do if I install this or that, but not HOW to do it)
I also had the same problem after running the Project Upgrade tool.
I discovered when making new configurations that "Win7" and "Win8" TargetVersion are now "Windows7" and "Windows8".
The upgrade tool does not make that change for you but I was able to manually edit my upgraded project with those changes and got it to build for all targets.
I discovered that the installer doesn't install the windows 10 SDK by default. So all the installing of other SDK's was useless. I Also found out that by installing the Win 10 SDK through the VS 2015 installer it integrates and allows me to build for targets back to windows 7 in VS 2015.
I've tried both the ISO and the web installer. Neither works, they both give the same error. I get the splash screen for a few seconds, and then a popup comes up and says that it has simply "stopped working." I've got the latest .NET installed (4.5.2), both Intel HD Graphics drivers and my NVIDIA drivers up to date as well. I've tried all of the solutions I can see that people had for this issue to no avail. Any help would be much appreciated.
Look at ActivityLog.xml and EventViewer (probably for errors in devenv.exe) to get more details. And specify what version of VS13 and any Update packs you're trying to install. Also if you had any previous versions installed and if you're on a 32 or 64 bit system.
the full path of that folder would be c:\users(your user login)\App Data\Microsoft . but make sure you have it set to see hidden files and folders.
And again - which VS13 are you trying?
Try to uninstall:
"Intel HD graphics driver" (generic driver)
Or try an updated graphics driver.
It works for me in Visual Studio 2013 and Visual Studio 2015.
I want to ask about an error I faced durring the installation of SDK 7.1 compiler in order to compile .c files under matlab, knowing that I've downloaded SDK ISO and .exe but without use, from this link
http://www.microsoft.com/en-us/download/details.aspx?id=8279
I'm using Matlab 2013b,Windows7 64 bit
I got this error every time
Setup could not find the file WinSDK_amd64\WinSDK_amd64.msi at any of the specified source locations G:\Setup
I have an Intel i7, Win 7 64 bit and I was able to resolve this by downloading the Windows SDK 7.1 (iso image) from this link.
http://download.microsoft.com/download/F/1/0/F10113F5-B750-4969-A255-274341AC6BCE/GRMSDKX_EN_DVD.iso
I had tried several downloads and this was the only one that actually contained the ../setup/WinSDK_amd64\WinSDK_amd64.msi file that the error message references.
Previous to finding this download I had tried removing every single instance of the C++ redistributable for each version of Visual studio I had installed. This alone did not work, because the other Win 7 SDK downloads I tried did not contain the ../setup/WinSDK_amd64\WinSDK_amd64.msi file that the error message references.
You can find it using Visual Studio 2019 installer under the name "C++ Windows XP Support for VS 2017 (v141) tools [Deprecated]".
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.