Essentially what I am trying to do is take a string with a bunch of text and if it has a substring of "$$" to replace it with a substring of "$$$"
ex:
string="abcde\$\$fghi"
# Modify string
echo $string
# ^ should give "abcde$$$fghi"
I have been at this for like 2 hours now and it seems like a very simple thing, so if anyone could provide some help then I would greatly appreciate it. Thanks!
EDIT: Changed original string in the question from "abcde$$fghi" to "abcde\$\$fghi"
$$ is a special variable in the shell, it contains the ID of the current process. The variables are expanded in double quotes, therefore string does not contain $$ but a number (the PID of shell) instead.
Enclose the string in apostrophes (single quotes) to get $$ inside it.
The replacement you need can be done in multiple ways. The simplest way (probably) and also the fastest way (for sure) is to use / in the parameter expansion of $string:
echo "${string/'$$'/'$$$'}"
To make it work you have to use the same trick as before: wrap $$ and $$$ in single quotes to prevent the shell replace them with something else. The quotes around the entire expression are needed to preserve the space characters contained by $string, otherwise the line is split to words by whitspaces and and echo outputs these words separated by one space character.
Check it online.
If you quote the string with single quote marks (i.e. string='abcde$$fghi') you can do the replacement with echo "${string/'$$'/'$$$'}"
Edit: this is basically what #axiac said in their comment
I am facing issue while assigning sting with spaces to variable. Below is my command.
test.ksh should accept "remove file" as one variable. But I am unable to do so.
hello="/export/appl/<userid>/test.ksh remove file"
$hello
As #Jetchisel mentionned, you should quote your string that contains spaces otherwise it will be interpreted as separated value ($1=remove and $2=file ). Moreover by looking what you want to achieve, I would suggest to use command substitution:
hello=$(/export/appl//test.ksh "remove file")
Hello I'm reading a book about bash scripting and the author says to add the following to the end of my .bashrc file. export PATH=~/bin:"$PATH" in order to execute my file from the command line by typing its name. I notice however that if I put export PATH=~/bin:$PATH I can achieve the same result. So my question is what is the difference between the one with quotes and the one without quotes? thanks.
The quotes won't hurt anything, but neither are they necessary. Assignments are processed specially by the shell. From the man page:
A variable may be assigned to by a statement of the form
name=[value]
If value is not given, the variable is assigned the null string. All values undergo tilde expansion, parameter and variable
expansion, command substitution, arithmetic expansion, and
quote removal (see EXPANSION below).
Notice that word-splitting and pathname generation are not on the list in bold. These are the two types of expansion you are trying to prevent by quoting a parameter expansion, but in this context they are not performed. The same rules apply to the assignments that are passed to the export built-in command.
You must include the variable PATH inside double quotes. So that it would handle the filepaths which has spaces but without double quotes, it won't handle the filenames which has spaces in it.
I was facing the same with trying to assign a JSON string to a variable in the terminal.
Wrap it with Single Quotes or Double Quotes
Use single quotes, if you string contains double quotes and vice-versa.
$ export TEMP_ENV='I like the "London" bridge'
$ echo $TEMP_ENV
>> I like the "London" bridge
$ export TEMP_ENV="I like the 'London' bridge"
$ echo $TEMP_ENV
>> I like the 'London' bridge
I want to run a command from a bash script which has single quotes and some other commands inside the single quotes and a variable.
e.g. repo forall -c '....$variable'
In this format, $ is escaped and the variable is not expanded.
I tried the following variations but they were rejected:
repo forall -c '...."$variable" '
repo forall -c " '....$variable' "
" repo forall -c '....$variable' "
repo forall -c "'" ....$variable "'"
If I substitute the value in place of the variable the command is executed just fine.
Please tell me where am I going wrong.
Inside single quotes everything is preserved literally, without exception.
That means you have to close the quotes, insert something, and then re-enter again.
'before'"$variable"'after'
'before'"'"'after'
'before'\''after'
Word concatenation is simply done by juxtaposition. As you can verify, each of the above lines is a single word to the shell. Quotes (single or double quotes, depending on the situation) don't isolate words. They are only used to disable interpretation of various special characters, like whitespace, $, ;... For a good tutorial on quoting see Mark Reed's answer. Also relevant: Which characters need to be escaped in bash?
Do not concatenate strings interpreted by a shell
You should absolutely avoid building shell commands by concatenating variables. This is a bad idea similar to concatenation of SQL fragments (SQL injection!).
Usually it is possible to have placeholders in the command, and to supply the command together with variables so that the callee can receive them from the invocation arguments list.
For example, the following is very unsafe. DON'T DO THIS
script="echo \"Argument 1 is: $myvar\""
/bin/sh -c "$script"
If the contents of $myvar is untrusted, here is an exploit:
myvar='foo"; echo "you were hacked'
Instead of the above invocation, use positional arguments. The following invocation is better -- it's not exploitable:
script='echo "arg 1 is: $1"'
/bin/sh -c "$script" -- "$myvar"
Note the use of single ticks in the assignment to script, which means that it's taken literally, without variable expansion or any other form of interpretation.
The repo command can't care what kind of quotes it gets. If you need parameter expansion, use double quotes. If that means you wind up having to backslash a lot of stuff, use single quotes for most of it, and then break out of them and go into doubles for the part where you need the expansion to happen.
repo forall -c 'literal stuff goes here; '"stuff with $parameters here"' more literal stuff'
Explanation follows, if you're interested.
When you run a command from the shell, what that command receives as arguments is an array of null-terminated strings. Those strings may contain absolutely any non-null character.
But when the shell is building that array of strings from a command line, it interprets some characters specially; this is designed to make commands easier (indeed, possible) to type. For instance, spaces normally indicate the boundary between strings in the array; for that reason, the individual arguments are sometimes called "words". But an argument may nonetheless have spaces in it; you just need some way to tell the shell that's what you want.
You can use a backslash in front of any character (including space, or another backslash) to tell the shell to treat that character literally. But while you can do something like this:
reply=\”That\'ll\ be\ \$4.96,\ please,\"\ said\ the\ cashier
...it can get tiresome. So the shell offers an alternative: quotation marks. These come in two main varieties.
Double-quotation marks are called "grouping quotes". They prevent wildcards and aliases from being expanded, but mostly they're for including spaces in a word. Other things like parameter and command expansion (the sorts of thing signaled by a $) still happen. And of course if you want a literal double-quote inside double-quotes, you have to backslash it:
reply="\"That'll be \$4.96, please,\" said the cashier"
Single-quotation marks are more draconian. Everything between them is taken completely literally, including backslashes. There is absolutely no way to get a literal single quote inside single quotes.
Fortunately, quotation marks in the shell are not word delimiters; by themselves, they don't terminate a word. You can go in and out of quotes, including between different types of quotes, within the same word to get the desired result:
reply='"That'\''ll be $4.96, please," said the cashier'
So that's easier - a lot fewer backslashes, although the close-single-quote, backslashed-literal-single-quote, open-single-quote sequence takes some getting used to.
Modern shells have added another quoting style not specified by the POSIX standard, in which the leading single quotation mark is prefixed with a dollar sign. Strings so quoted follow similar conventions to string literals in the ANSI standard version of the C programming language, and are therefore sometimes called "ANSI strings" and the $'...' pair "ANSI quotes". Within such strings, the above advice about backslashes being taken literally no longer applies. Instead, they become special again - not only can you include a literal single quotation mark or backslash by prepending a backslash to it, but the shell also expands the ANSI C character escapes (like \n for a newline, \t for tab, and \xHH for the character with hexadecimal code HH). Otherwise, however, they behave as single-quoted strings: no parameter or command substitution takes place:
reply=$'"That\'ll be $4.96, please," said the cashier'
The important thing to note is that the single string that gets stored in the reply variable is exactly the same in all of these examples. Similarly, after the shell is done parsing a command line, there is no way for the command being run to tell exactly how each argument string was actually typed – or even if it was typed, rather than being created programmatically somehow.
Below is what worked for me -
QUOTE="'"
hive -e "alter table TBL_NAME set location $QUOTE$TBL_HDFS_DIR_PATH$QUOTE"
EDIT: (As per the comments in question:)
I've been looking into this since then. I was lucky enough that I had repo laying around. Still it's not clear to me whether you need to enclose your commands between single quotes by force. I looked into the repo syntax and I don't think you need to. You could used double quotes around your command, and then use whatever single and double quotes you need inside provided you escape double ones.
just use printf
instead of
repo forall -c '....$variable'
use printf to replace the variable token with the expanded variable.
For example:
template='.... %s'
repo forall -c $(printf "${template}" "${variable}")
Variables can contain single quotes.
myvar=\'....$variable\'
repo forall -c $myvar
I was wondering why I could never get my awk statement to print from an ssh session so I found this forum. Nothing here helped me directly but if anyone is having an issue similar to below, then give me an up vote. It seems any sort of single or double quotes were just not helping, but then I didn't try everything.
check_var="df -h / | awk 'FNR==2{print $3}'"
getckvar=$(ssh user#host "$check_var")
echo $getckvar
What do you get? A load of nothing.
Fix: escape \$3 in your print function.
Does this work for you?
eval repo forall -c '....$variable'
I have a bash script,
echo 'abcd'
in shell, I want to show ab'c'd and I have tried following approach but without success
echo 'ab\'c\'d'
I am asking is it possible to show single quote in single quoted text?
From the bash manual section on Single Quotes:
A single quote may not occur between single quotes, even when preceded by a backslash.
You'll need to use double quotes instead. It's not pretty, but the following gives the output you are looking for:
echo 'ab'"'"'c'"'"'d'
A bash-specific feature, not part of POSIX, is a $'...'-quoted string:
echo $'ab\'c\'d'
Such a string behaves identically to a single-quoted string, but does allow for a selection of \-escaped characters (such as \n, \t, and yes, \').