Essentially what I am trying to do is take a string with a bunch of text and if it has a substring of "$$" to replace it with a substring of "$$$"
ex:
string="abcde\$\$fghi"
# Modify string
echo $string
# ^ should give "abcde$$$fghi"
I have been at this for like 2 hours now and it seems like a very simple thing, so if anyone could provide some help then I would greatly appreciate it. Thanks!
EDIT: Changed original string in the question from "abcde$$fghi" to "abcde\$\$fghi"
$$ is a special variable in the shell, it contains the ID of the current process. The variables are expanded in double quotes, therefore string does not contain $$ but a number (the PID of shell) instead.
Enclose the string in apostrophes (single quotes) to get $$ inside it.
The replacement you need can be done in multiple ways. The simplest way (probably) and also the fastest way (for sure) is to use / in the parameter expansion of $string:
echo "${string/'$$'/'$$$'}"
To make it work you have to use the same trick as before: wrap $$ and $$$ in single quotes to prevent the shell replace them with something else. The quotes around the entire expression are needed to preserve the space characters contained by $string, otherwise the line is split to words by whitspaces and and echo outputs these words separated by one space character.
Check it online.
If you quote the string with single quote marks (i.e. string='abcde$$fghi') you can do the replacement with echo "${string/'$$'/'$$$'}"
Edit: this is basically what #axiac said in their comment
Related
To rephrase - I want to use Bash command substitution and string substitution in the same line.
My actual commands are longer, but the ridiculous use of echo here is just a "substitution" for shortness and acts the same - with same errors ;)
I know we can use a Bash command to produce it's output string as a parameter for another command like this:
echo "$(echo "aahahah</ddd>")"
aahahah</ddd>
I also know we can remove last known part of a string like this:
var="aahahah</ddd>"; echo "${var%</ddd>}"
aahahah
I am trying to write a command where one command gives a string output, where I want to remove last part, which is known.
echo "${$(echo "aahahah</ddd>")%</ddd>}"
-bash: ${$(echo "aahahah</ddd>")%</ddd>}: bad substitution
It might be the order of things happening or substitution only works on variables or hardcoded strings. But I suspect just me missing something and it is possible.
How do I make it work?
Why doesn't it work?
When a dollar sign as in $word or equivalently ${word} is used, it asks for word's content. This is called parameter expansion, as per man bash.
You may write var="aahahah</ddd>"; echo "${var%</ddd>}": That expands var and performs a special suffix operation before returning the value.
However, you may not write echo "${$(echo "aahahah</ddd>")%</ddd>}" because there is nothing to expand once $(echo "aahahah</ddd>") is evaluated.
From man bash (my emphasis):
${parameter%word}
Remove matching suffix pattern. The word is expanded to produce a
pattern just as in pathname expansion. If the pattern
matches a trailing portion of the expanded value of parameter, then
the result of the expansion is the expanded value of parameter
with the shortest matching pattern (the ''%'' case) or the longest matching pattern (the ''%%'' case) deleted.
Combine your commands like this
var=$(echo "aahahah</ddd>")
echo ${var/'</ddd>'}
I want to display a string in Bash like this
I'm a student
Of course you can do it like this
echo "I'm a student"
But how to accomplish this while using single quote around the string ?
echo 'I\'m a student'
does not work. But the following works:
echo $'I\'m a student'
From the man page of bash:
A single quote may not occur between single quotes, even when preceded
by a backslash.
....
Words of the form $'string' are treated specially. The word
expands to string, with backslash-escaped characters replaced as
specified by the ANSI C standard.
The "ugly" solution mentioned by Glenn Jackman should actually be listed as a top level answer. It works well and is actually beautiful in some situations.
'I'"'"'m a student'
This ends the single quoted string after I then immediately starts a double quoted string containing a single quote and then starts another single quoted string. Bash then concatenates all contiguous strings into one.
Beautiful!
The example below works because the escaped single quote \' is technically between two single-quoted arguments
echo 'I'\''m a student'
Another way to workaround is to use printf instead echo and escape the required single quote with \x27:
printf 'I\x27m a student!\n'
I propose
echo "I'm a student"
like in other languages.
I want to run a command from a bash script which has single quotes and some other commands inside the single quotes and a variable.
e.g. repo forall -c '....$variable'
In this format, $ is escaped and the variable is not expanded.
I tried the following variations but they were rejected:
repo forall -c '...."$variable" '
repo forall -c " '....$variable' "
" repo forall -c '....$variable' "
repo forall -c "'" ....$variable "'"
If I substitute the value in place of the variable the command is executed just fine.
Please tell me where am I going wrong.
Inside single quotes everything is preserved literally, without exception.
That means you have to close the quotes, insert something, and then re-enter again.
'before'"$variable"'after'
'before'"'"'after'
'before'\''after'
Word concatenation is simply done by juxtaposition. As you can verify, each of the above lines is a single word to the shell. Quotes (single or double quotes, depending on the situation) don't isolate words. They are only used to disable interpretation of various special characters, like whitespace, $, ;... For a good tutorial on quoting see Mark Reed's answer. Also relevant: Which characters need to be escaped in bash?
Do not concatenate strings interpreted by a shell
You should absolutely avoid building shell commands by concatenating variables. This is a bad idea similar to concatenation of SQL fragments (SQL injection!).
Usually it is possible to have placeholders in the command, and to supply the command together with variables so that the callee can receive them from the invocation arguments list.
For example, the following is very unsafe. DON'T DO THIS
script="echo \"Argument 1 is: $myvar\""
/bin/sh -c "$script"
If the contents of $myvar is untrusted, here is an exploit:
myvar='foo"; echo "you were hacked'
Instead of the above invocation, use positional arguments. The following invocation is better -- it's not exploitable:
script='echo "arg 1 is: $1"'
/bin/sh -c "$script" -- "$myvar"
Note the use of single ticks in the assignment to script, which means that it's taken literally, without variable expansion or any other form of interpretation.
The repo command can't care what kind of quotes it gets. If you need parameter expansion, use double quotes. If that means you wind up having to backslash a lot of stuff, use single quotes for most of it, and then break out of them and go into doubles for the part where you need the expansion to happen.
repo forall -c 'literal stuff goes here; '"stuff with $parameters here"' more literal stuff'
Explanation follows, if you're interested.
When you run a command from the shell, what that command receives as arguments is an array of null-terminated strings. Those strings may contain absolutely any non-null character.
But when the shell is building that array of strings from a command line, it interprets some characters specially; this is designed to make commands easier (indeed, possible) to type. For instance, spaces normally indicate the boundary between strings in the array; for that reason, the individual arguments are sometimes called "words". But an argument may nonetheless have spaces in it; you just need some way to tell the shell that's what you want.
You can use a backslash in front of any character (including space, or another backslash) to tell the shell to treat that character literally. But while you can do something like this:
reply=\”That\'ll\ be\ \$4.96,\ please,\"\ said\ the\ cashier
...it can get tiresome. So the shell offers an alternative: quotation marks. These come in two main varieties.
Double-quotation marks are called "grouping quotes". They prevent wildcards and aliases from being expanded, but mostly they're for including spaces in a word. Other things like parameter and command expansion (the sorts of thing signaled by a $) still happen. And of course if you want a literal double-quote inside double-quotes, you have to backslash it:
reply="\"That'll be \$4.96, please,\" said the cashier"
Single-quotation marks are more draconian. Everything between them is taken completely literally, including backslashes. There is absolutely no way to get a literal single quote inside single quotes.
Fortunately, quotation marks in the shell are not word delimiters; by themselves, they don't terminate a word. You can go in and out of quotes, including between different types of quotes, within the same word to get the desired result:
reply='"That'\''ll be $4.96, please," said the cashier'
So that's easier - a lot fewer backslashes, although the close-single-quote, backslashed-literal-single-quote, open-single-quote sequence takes some getting used to.
Modern shells have added another quoting style not specified by the POSIX standard, in which the leading single quotation mark is prefixed with a dollar sign. Strings so quoted follow similar conventions to string literals in the ANSI standard version of the C programming language, and are therefore sometimes called "ANSI strings" and the $'...' pair "ANSI quotes". Within such strings, the above advice about backslashes being taken literally no longer applies. Instead, they become special again - not only can you include a literal single quotation mark or backslash by prepending a backslash to it, but the shell also expands the ANSI C character escapes (like \n for a newline, \t for tab, and \xHH for the character with hexadecimal code HH). Otherwise, however, they behave as single-quoted strings: no parameter or command substitution takes place:
reply=$'"That\'ll be $4.96, please," said the cashier'
The important thing to note is that the single string that gets stored in the reply variable is exactly the same in all of these examples. Similarly, after the shell is done parsing a command line, there is no way for the command being run to tell exactly how each argument string was actually typed – or even if it was typed, rather than being created programmatically somehow.
Below is what worked for me -
QUOTE="'"
hive -e "alter table TBL_NAME set location $QUOTE$TBL_HDFS_DIR_PATH$QUOTE"
EDIT: (As per the comments in question:)
I've been looking into this since then. I was lucky enough that I had repo laying around. Still it's not clear to me whether you need to enclose your commands between single quotes by force. I looked into the repo syntax and I don't think you need to. You could used double quotes around your command, and then use whatever single and double quotes you need inside provided you escape double ones.
just use printf
instead of
repo forall -c '....$variable'
use printf to replace the variable token with the expanded variable.
For example:
template='.... %s'
repo forall -c $(printf "${template}" "${variable}")
Variables can contain single quotes.
myvar=\'....$variable\'
repo forall -c $myvar
I was wondering why I could never get my awk statement to print from an ssh session so I found this forum. Nothing here helped me directly but if anyone is having an issue similar to below, then give me an up vote. It seems any sort of single or double quotes were just not helping, but then I didn't try everything.
check_var="df -h / | awk 'FNR==2{print $3}'"
getckvar=$(ssh user#host "$check_var")
echo $getckvar
What do you get? A load of nothing.
Fix: escape \$3 in your print function.
Does this work for you?
eval repo forall -c '....$variable'
I have program whose textual output I want to directly execute in a shell. How shall I format the output of this program such that the paths with spaces are accepted by the shell ?
$(echo ls /folderA/folder\ with\ spaces/)
Some more info: the program that generates the output is coded in Haskell (source). It's a simple program that keeps a list of my favorite commands. It prints the commands with 'cmdl -l'. I can then choose one command to execute with 'cmdl -g12' for command number 12. Thanks for pointing out that instead of $( ) use 'cmdl -g12 | bash', I wasn't aware of that...
How shall I format the output of this program such that the paths with
spaces are accepted by the shell ?
The shell cannot distinguish between spaces that are part of a path and spaces that are separator between arguments, unless those are properly quoted. Moreover, you actually need proper quoting using single quotes ('...') in order to "shield" all those characters combinations that might otherwise have special meaning for the shell (\, &, |, ||, ...).
Depending the language used for your external tool, their might be a library available for that purpose. As as example, Python has pipes.quote (shlex.quote on Python 3) and Perl has String::ShellQuote::shell_quote.
I'm not quite sure I understand, but don't you just want to pipe through the shell?
For a program called foo
$ foo | sh
To format output from your program so Bash won't try to space-separate them into arguments either update, probably easiest just to double-quote them with any normal quoting method around each argument, e.g.
mkdir "/tmp/Joey \"The Lips\" Fagan"
As you saw, you can backslash the spaces alternatively, but I find that less readable ususally.
EDIT:
If you may have special shell characters (&|``()[]$ etc), you'll have to do it the hard/proper way (with a specific escaper for your language and target - as others have mentioned.
It's not just spaces you need to worry about, but other characters such as [ and ] (glob a.k.a pathname-expansion characters) and metacharacters such as ;, &, (, ...
You can use the following approach:
Enclose the string in single quotes.
Replace existing single quotes in the string with '\'' (which effectively breaks the string into multiple parts with spliced in \-escaped single quotes; the shell then reassembles the parts into a single string).
Example:
I'm good (& well[1];) would encode to 'I'\''m good (& well[1]);'
Note how single-quoting allows literal use of the glob characters and metacharacters.
Since single quotes themselves can never be used within single-quoted strings (there's not even an escape), the splicing-in approach described above is needed.
As described by #mklement0, a safe algorithm is to wrap every argument in a pair of single quotes, and quote single quotes inside arguments as '\''. Here is a shell function that does it:
function quote {
typeset cmd="" escaped
for arg; do
escaped=${arg//\'/\'\\\'\'}
cmd="$cmd '$escaped'"
done
printf %s "$cmd"
}
$ quote foo "bar baz" "don't do it"
'foo' 'bar baz' 'don'\''t do it'
I want to do a search and replace on a line with specific line number. However, I want to be able to use a variable for the Line Number itself.
For instance, if I wanted to replace the number 4 with a number 5 on line 180. I would use the following code.
sed '180 s/4/5/' file
My Question is how do I use a variable for the line number?
sed '$variable s/4/5/' file
#gniourf_gniourf's comment contains the crucial pointer: use double quotes around your sed program in order to reference shell variables (the shell doesn't interpret (expand) single-quoted strings in any way).
Note that sed programs are their own world - they have NO concept of variables, so the only way to use variables is to use a double-quoted string evaluated by the shell containing references to shell variables.
As a result, you must \-escape characters that you want the shell to ignore and pass through to sed to see, notably $ as \$.
In your specific case, however, nothing needs escaping.
Thus, as #gniourf_gniourf states in his comment, use:
sed "$variable s/4/5/" file
Afterthought:
Alternatively, the core of your sed program can remain single-quoted, with only the shell-variable references spliced in as double-quoted strings; note that no spaces are allowed between the string components, as the entire expression must evaluate to a single string:
sed "$variable"' s/4/5/' file
While in this specific case you could get away without the double quotes around the variable reference, it's generally safer to use them, so as to avoid unwanted shell expansions (such as word splitting) that could alter or even break the command.
You could just leave the variable outside of the quotes
sed $variable's/4/5/' file
Note that there cannot be a space between the variable and beginning quote though
You can do it with awk
awk 'NR==l {sub(/4/,"5")}1' l="$variable" file