How to change the redelivery policy for the embedded ActiveMQ when using with Spring Boot? I tried specifying FixedBackOff on the DefaultJmsListenerContainerFactory but it didn't help. Below is code I am using to initialize the jms factory bean. I have a message consumer processing incoming messages on a queue. During processing because of unavailable resource, I throw a checked exception. I am hoping to have the message redelivered for processing after a fixed interval.
Spring Boot : 1.5.7.Release
Java : 1.7
#Bean
public JmsListenerContainerFactory<?> publishFactory(ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
DefaultJmsListenerContainerFactory factory =
new DefaultJmsListenerContainerFactory();
factory.setBackOff(new FixedBackOff(5000, 5));
// This provides all boot's default to this factory, including the message converter
configurer.configure(factory, connectionFactory);
// You could still override some of Boot's default if necessary.
factory.setErrorHandler(new ErrorHandler() {
#Override
public void handleError(Throwable t) {
LOG.error("Error occured in JMS transaction.", t);
}
});
return factory;
}
Consumer Code:
#JmsListener(destination = "PublishQueue", containerFactory = "publishFactory")
#Transactional
public void receiveMessage(PublishData publishData) {
LOG.info("Processing incoming message on publish queue with transaction id: " + publishData.getTransactionId());
PublishUser user = new PublishUser();
user.setPriority(1);
user.setUserId(publishData.getUserId());
LOG.trace("Trying to enroll in the publish lock queue for user: " + user);
PublishLockQueue lockQueue = publishLockQueueService.createLock(user);
if (lockQueue == null)
throw new RuntimeException("Unable to create lock for publish");
LOG.trace("Publish lock queue obtained with lock queue id: " + lockQueue.getId());
try {
publishLockQueueService.acquireLock(lockQueue.getId());
LOG.trace("Acquired publish lock.");
}
catch (PublishLockQueueServiceException pex) {
throw new RuntimeException(pex);
}
try {
publishService.publish(publishData, lockQueue.getId());
LOG.trace("Completed publish of changes.");
sendPublishSuccessNotification(publishData);
}
finally {
LOG.trace("Trying to release lock to publish.");
publishLockQueueService.releaseLock(lockQueue.getId());
}
LOG.info("Publish has been completed for transaction id: " + publishData.getTransactionId());
}
#claus answerd: i tested it to work:
Its the consumer, you need to use transacted acknowledge mode to let the consumer rollback on exception and let ActiveMQ be able to re-deliver the message to the same consumer or another consumer if you have multiple consumers running. You can however configure redelivery options on the ActiveMQ such as backoff etc. The error handler above is just a noop listener which cannot do very much other than logging
Related
Working versions in the app
IBM AllClient version : 'com.ibm.mq:com.ibm.mq.allclient:9.1.1.0'
org.springframework:spring-jms : 4.3.9.RELEASE
javax.jms:javax.jms-api : 2.0.1
My requirement is that in case of the failure of a message processing due to say, consumer not being available (eg. DB is unavailable), the message remains in the queue or put back on the queue (if that is even possible). This is because the order of the messages is important, messages have to be consumed in the same order that they are received. The Java app is single-threaded.
I have tried the following
#Override
public void onMessage(Message message)
{
try{
if(message instanceOf Textmessage)
{
}
:
:
throw new Exception("Test");// Just to test the retry
}
catch(Exception ex)
{
try
{
int temp = message.getIntProperty("JMSXDeliveryCount");
throw new RuntimeException("Redlivery attempted ");
// At this point, I am expecting JMS to put the message back into the queue.
// But it is actually put into the Bakout queue.
}
catch(JMSException ef)
{
String temp = ef.getMessage();
}
}
}
I have set this in my spring.xml for the jmsContainer bean.
<property name="sessionTransacted" value="true" />
What is wrong with the code above ?
And if putting the message back in the queue is not practical, how can one browse the message, process it and, if successful, pull the message (so it is consumed and no longer on the queue) ? Is this scenario supported in IBM provider for JMS?
The IBM MQ Local queue has BOTHRESH(1).
To preserve message ordering, one approach might be to stop the message listener temporarily as part of your rollback strategy. Looking at the Spring Boot doc for DefaultMessageListenerContainer there is a stop(Runnable callback) method. I've experimented with using this in a rollback as follows.
To ensure my Listener is single threaded, on my DefaultJmsListenerContainerFactory I set containerFactory.setConcurrency("1").
In my Listener, I set an id
#JmsListener(destination = "DEV.QUEUE.2", containerFactory = "listenerTwoFactory", concurrency="1", id="listenerTwo")
And retrieve the DefaultMessageListenerContainer instance.
JmsListenerEndpointRegistry reg = context.getBean(JmsListenerEndpointRegistry.class);
DefaultMessageListenerContainer mlc = (DefaultMessageListenerContainer) reg.getListenerContainer("listenerTwo");
For testing, I check JMSXDeliveryCount and throw an exception to rollback.
retryCount = Integer.parseInt(msg.getStringProperty("JMSXDeliveryCount"));
if (retryCount < 5) {
throw new Exception("Rollback test "+retryCount);
}
In the Listener's catch processing, I call stop(Runnable callback) on the DefaultMessageListenerContainer instance and pass in a new class ContainerTimedRestart as defined below.
//catch processing here and decide to rollback
mlc.stop(new ContainerTimedRestart(mlc,delay));
System.out.println("#### "+getClass().getName()+" Unable to process message.");
throw new Exception();
ContainerTimedRestart extends Runnable and DefaultMessageListenerContainer is responsible for invoking the run() method when the stop call completes.
public class ContainerTimedRestart implements Runnable {
//Container instance to restart.
private DefaultMessageListenerContainer theMlc;
//Default delay before restart in mills.
private long theDelay = 5000L;
//Basic constructor for testing.
public ContainerTimedRestart(DefaultMessageListenerContainer mlc, long delay) {
theMlc = mlc;
theDelay = delay;
}
public void run(){
//Validate container instance.
try {
System.out.println("#### "+getClass().getName()+"Waiting for "+theDelay+" millis.");
Thread.sleep(theDelay);
System.out.println("#### "+getClass().getName()+"Restarting container.");
theMlc.start();
System.out.println("#### "+getClass().getName()+"Container started!");
} catch (InterruptedException ie) {
ie.printStackTrace();
//Further checks and ensure container is in correct state.
//Report errors.
}
}
I loaded my queue with three messages with payloads "a", "b", and "c" respectively and started the listener.
Checking DEV.QUEUE.2 on my queue manager I see IPPROCS(1) confirming only one application handle has the queue open. The messages are processed in order after each is rolled five times and with a 5 second delay between rollback attempts.
IBM MQ classes for JMS has poison message handling built in. This handling is based on the QLOCAL setting BOTHRESH, this stands for Backout Threshold. Each IBM MQ message has a "header" called the MQMD (MQ Message Descriptor). One of the fields in the MQMD is BackoutCount. The default value of BackoutCount on a new message is 0. Each time a message rolled back to the queue this count is incremented by 1. A rollback can be either from a specific call to rollback(), or due to the application being disconnected from MQ before commit() is called (due to a network issue for example or the application crashing).
Poison message handling is disabled if you set BOTHRESH(0).
If BOTHRESH is >= 1, then poison message handling is enabled and when IBM MQ classes for JMS reads a message from a queue it will check if the BackoutCount is >= to the BOTHRESH. If the message is eligible for poison message handling then it will be moved to the queue specified in the BOQNAME attribute, if this attribute is empty or the application does not have access to PUT to this queue for some reason, it will instead attempt to put the message to the queue specified in the queue managers DEADQ attribute, if it can't put to either of these locations it will be rolled back to the queue.
You can find more detailed information on IBM MQ classes for JMS poison message handling in the IBM MQ v9.1 Knowledge Center page Developing applications>Developing JMS and Java applications>Using IBM MQ classes for JMS>Writing IBM MQ classes for JMS applications>Handling poison messages in IBM MQ classes for JMS
In Spring JMS you can define your own container. One container is created for one Jms Destination. We should run a single-threaded JMS listener to maintain the message ordering, to make this work set the concurrency to 1.
We can design our container to return null once it encounters errors, post-failure all receive calls should return null so that no messages are polled from the destination till the destination is active once again. We can maintain an active state using a timestamp, that could be simple milliseconds. A sample JMS config should be sufficient to add backoff. You can add small sleep instead of continuously returning null from receiveMessage method, for example, sleep for 10 seconds before making the next call, this will save some CPU resources.
#Configuration
#EnableJms
public class JmsConfig {
#Bean
public JmsListenerContainerFactory<?> jmsContainerFactory(ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory() {
#Override
protected DefaultMessageListenerContainer createContainerInstance() {
return new DefaultMessageListenerContainer() {
private long deactivatedTill = 0;
#Override
protected Message receiveMessage(MessageConsumer consumer) throws JMSException {
if (deactivatedTill < System.currentTimeMillis()) {
return receiveFromConsumer(consumer, getReceiveTimeout());
}
logger.info("Disabled due to failure :(");
return null;
}
#Override
protected void doInvokeListener(MessageListener listener, Message message)
throws JMSException {
try {
super.doInvokeListener(listener, message);
} catch (Exception e) {
handleException(message);
throw e;
}
}
private long getDelay(int retryCount) {
if (retryCount <= 1) {
return 20;
}
return (long) (20 * Math.pow(2, retryCount));
}
private void handleException(Message msg) throws JMSException {
if (msg.propertyExists("JMSXDeliveryCount")) {
int retryCount = msg.getIntProperty("JMSXDeliveryCount");
deactivatedTill = System.currentTimeMillis() + getDelay(retryCount);
}
}
#Override
protected void doInvokeListener(SessionAwareMessageListener listener, Session session,
Message message)
throws JMSException {
try {
super.doInvokeListener(listener, session, message);
} catch (Exception e) {
handleException(message);
throw e;
}
}
};
}
};
// This provides all boot's default to this factory, including the message converter
configurer.configure(factory, connectionFactory);
// You could still override some of Boot's default if necessary.
return factory;
}
}
I am designing a simple system where the flow is going to be like this:
Message Producer Microservice --> Active MQ --> Message Consumer Microservice --> Mongo DB
I need to design a queuing strategy in a way so that if MongoDB is down, I should not lose the message (because Message consumer will dequeue the message).
My consumer is written like this:
#JmsListener(destination = "Consumer.myconsumer.VirtualTopic.Tracking")
public void onReceiveFromQueueConsumer2(TrackingRequest trackingRequest) {
log.debug("Received tracking request from the queue by consumer 2");
log.debug(trackingRequest.toString());
}
How do you provide client acknowledgement?
You can use client acknowledge mode from your "Message Consumer Microservice." Since you're using a Spring JmsListener you can define the listener container using the containerFactory and then you can set the mode you want on your listener container using sessionAcknowledgeMode. See the Spring documentation for more details on what ack mode you might want to use here.
From the perspective of the ActiveMQ client you can configure redelivery semantics however you like in case of a failure. See the ActiveMQ documentation for more about that.
Alright, so I was able to solve this dilemma, here is what your config should be like (thanks to Justin for his valuable inputs):
#Bean
public ActiveMQConnectionFactory connectionFactory() {
ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory();
connectionFactory.setBrokerURL(brokerUrl);
connectionFactory.setPassword(userName);
connectionFactory.setUserName(password);
connectionFactory.setTrustAllPackages(true);
connectionFactory.setRedeliveryPolicy(redeliveryPolicy());
return connectionFactory;
}
#Bean
public JmsTemplate jmsTemplate() {
JmsTemplate template = new JmsTemplate();
template.setConnectionFactory(connectionFactory());
return template;
}
#Bean
public DefaultJmsListenerContainerFactory jmsListenerContainerFactory() {
DefaultJmsListenerContainerFactory listenerCF = new DefaultJmsListenerContainerFactory();
listenerCF.setConnectionFactory(connectionFactory());
listenerCF.setSessionAcknowledgeMode(Session.AUTO_ACKNOWLEDGE);
listenerCF.setSessionTransacted(true);
return listenerCF;
}
#Bean
public RedeliveryPolicy redeliveryPolicy() {
RedeliveryPolicy redeliveryPolicy = new RedeliveryPolicy();
redeliveryPolicy.setRedeliveryDelay(600000L); //keep trying every 10 minutes
redeliveryPolicy.setMaximumRedeliveries(-1); //Keep trying till its successfully inserted
return redeliveryPolicy;
}
I have a setup where I have to read a message from a queue in an ActiveMQ broker. Once the message is read I have to do a long-running operation on the message.
Due to this long-running operation on the message I want to acknowledge the message as soon as possible so the resources on the broker are released. The plan would be to execute the following steps once a message is received:
Get message from ActiveMQ
Insert message into DB
Acknowledge message
Do some long-running operation with the message
I've read about JMS and the different acknowledge modes, so before even trying to do that I decided to set up an application where I could try the different modes to understand how they are processes, unfortunately I cannot seem to get my desired output.
Following the information in this answer https://stackoverflow.com/a/10188078 as well as https://docs.spring.io/spring/docs/current/javadoc-api/org/springframework/jms/listener/DefaultMessageListenerContainer.html I thought that by using AUTO_ACKNOWLEDGE the message would be acknowledged before my listener is even called, but if I throw an exception in the listener the message is redelivered.
I've tried both with and without setting the setSessionTransacted to true, but in both cases I get the same output. The message is redelivered when an exception is thrown in the JmsListener.
Configuration of JMS
#Bean
public ConnectionFactory connectionFactory() {
ConnectionFactory connectionFactory =
new ActiveMQConnectionFactory(jmsConfig.getBrokerUrl());
return connectionFactory;
}
#Bean
public JmsTemplate jmstemplate(){
JmsTemplate jmsTemplate = new JmsTemplate();
jmsTemplate.setConnectionFactory(connectionFactory());
//jmsTemplate.setSessionTransacted(true);
jmsTemplate.setDefaultDestinationName( jmsConfig.getQueueIn() );
return jmsTemplate;
}
#Bean
public JmsListenerContainerFactory jmsListenerContainerFactoryxxxx(
ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
factory.setSessionAcknowledgeMode(Session.AUTO_ACKNOWLEDGE);
//factory.setConcurrency("1");
factory.setSessionTransacted(true);
configurer.configure(factory, connectionFactory);
return factory;
}
JmsListener
#JmsListener(destination = "B1Q1", containerFactory = "jmsListenerContainerFactoryxxxx")
public void receiveMessage(Message message) {
try {
TextMessage m = (TextMessage) message;
String messageText = m.getText();
int retryNum = message.getIntProperty("JMSXDeliveryCount");
long s = message.getLongProperty("JMSTimestamp");
Date d = new Date( s );
String dbText = String.format("Retry %d. Message: %s", retryNum, messageText);
if ( messageText.toLowerCase().contains("exception") ) {
logger.info("Creating exception for retry: {}", retryNum);
throw new RuntimeException();
}
} catch (JMSException e) {
logger.error("Exception!!", e);
}
}
How should I change the code so that the message is not redelivered when an exception is thrown?
Going back to my application where I would be inserting the message into the DB. How could I acknowledge the message in by JmsListener after the message is inserted in the DB but before executing the long-running task?
In order to be able to use AUTO_ACKNOWLEDGE or CLIENT_ACKNOWLEDGE I had to call factory.setSessionTransacted(false) after configuring the factory.
Calling configurer.configure(factory, connectionFactory) overrides the value of sessionTransacted, in my case it was setting it to true which rendered AUTO_ACKNOWLEDGE or CLIENT_ACKNOWLEDGE ineffective. Here's the relevant code of DefaultJmsListenerContainerFactoryConfigurer.java:
public void configure(DefaultJmsListenerContainerFactory factory, ConnectionFactory connectionFactory) {
...
...
if (this.transactionManager != null) {
factory.setTransactionManager(this.transactionManager);
} else {
factory.setSessionTransacted(true);
}
...
...
factory.setSessionAcknowledgeMode(Tibjms.EXPLICIT_CLIENT_ACKNOWLEDGE);
//factory.setSessionTransacted(false);// here it’s not working
factory.setTaskExecutor(new SimpleAsyncTaskExecutor("KDBMessageListener-"));
configurer.configure(factory, connectionFactory);
factory.setSessionTransacted(false); //post configure ,session transacted is working
How can I configure my Spring listener to receive multiple JMS messages per session from Solace? My current JMS configuration is as follows:
#Bean
public DefaultJmsListenerContainerFactory listenerContainerFactory(ConnectionFactory connectionFactory, #Value("${jms.max-listeners}") Integer maxListeners) {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
factory.setConnectionFactory(connectionFactory);
factory.setConcurrency("1-" + maxListeners);
factory.setSessionAcknowledgeMode(Session.SESSION_TRANSACTED);
factory.setSessionTransacted(true);
factory.setCacheLevel(DefaultMessageListenerContainer.CACHE_CONSUMER);
return factory;
}
#JmsListener(containerFactory = "listenerContainerFactory", destination = "${jms.my-queue}")
public void receive(String messages) {
try {
...
} catch (Exception e) {
...
}
}
The payloads need to be single messages, however I'd like to consume many of them in each transaction so that I'm able to batch persist to my persistent store.
Typically this is done with the Solace Native API, but I'd like to abstract our JMS implementation with Spring because it alleviates the nasty boiler plate that comes alongside that API.
Our JMS infrastructure is load balanced. As a result of this, I am attempting to use a connectionNameList when configuring the connection factory. The idea here is that any JMS message that arrives on either of the primary or secondary queue manager will get picked up and processed. However, it only appears that messages are being picked up by the primary.
Here is my listener annotation:
#JmsListener(destination = "${request-queue}", containerFactory = "DefaultJmsListenerContainerFactory")
public void onMessage(Message msg) {
System.out.println(msg.toString());
}
Here is the JMS listener container factory:
#Bean(name = "DefaultJmsListenerContainerFactory")
public DefaultJmsListenerContainerFactory createJmsListenerContainerFactory() {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
factory.setConnectionFactory(buildConnectionFactory());
factory.setConcurrency(numberOfListeners);
factory.setSessionAcknowledgeMode(Session.AUTO_ACKNOWLEDGE);
factory.setSessionTransacted(false);
factory.setErrorHandler(queueErrorHandler);
factory.setBackOff(getBackOffStrategy());
return factory;
}
And here is the connection factory:
#Bean(name = "MQConnectionFactory")
public ConnectionFactory buildConnectionFactory() {
try {
MQConnectionFactory mqcf = new MQConnectionFactory();
mqcf.setConnectionNameList(mq1.daluga.com(2171),mq2.daluga.com(2171));
mqcf.setChannel(channel);
mqcf.setTransportType(WMQConstants.WMQ_CM_CLIENT);
return mqcf;
} catch (Exception e) {
throw new RuntimeException(message, e);
}
}
I suspect something in my configuration is just not right. Is there anything obvious that folks see that might cause messages not to be picked up from the secondary queue manager?
Thanks!