With EnumSystemLocalesEx I can enumerate supported countries and get the ISO-3166-Alpha 2 code.
With GetLocaleInfoEx I can retrieve the language name and the ISO-3166-Alpha 3 code. The list of information I can get does not contain the ISO-3166 numeric value, or I missed it and it hides behind a value I can't understand.
I found LOCALE_SISO3166CTRYNAME, LOCALE_SISO3166CTRYNAME2.
Is there a way to to retrieve the ISO-3166-Numeric value with any of the Windows API function too, when I have a given ISO Alpha 2 or Alpha 3 code?
Edit: Code should work for Windows Vista and later!
Related
In the MEDICAL_SERVICE_LINES table, there is a field ‘PROCEDURE’. The data dictionary notes that this is ‘CPT, HCPCS, or ICD-10-PCS (less commonly)’. Is there a field that indicates which of these terminologies the code is from?
Can you use modifiers to help identify? Or are the code formats the best tool like:
CPT:
5 numbers or 4 numbers and a letter (in that order)
HCPCS:
1 letter and 4 numbers (in that order).
This customer receives PLAID and is not in Sentinel. (data dictionary here)
The code formats would be the best to distinguish definitively what type of code it is. The modifiers are not filled out all the time (some claims may not have modifiers attached to the procedure).
Your layout of the code format is correct (see section HCPCS Coding here for additional confirmation). HCPCS Level 1 is comprised of CPT codes. HCPCS Level 2/3 is what we typically regard as just "HCPCS"
How can I get the value of important id and ValueType?
I have tried using web_save_param_regexp (but unfortunately I don't fully understand how the function works).
I have also tried using web_save_param (with the help of offset and length).
unfortunately once again I cannot get the accurate value some values change in length specially when the total amount values dynamically changes per run.
<important id=\"insertsomevalueshere\" record=\"1\" nucTotal=\"NUC609.40\"><total amount=\"68.75\" currency=\"USD\"/><total amount=\"609.40\" currency=\"USD\"/><out avgsomecost=\"540.65\" ValueType=\"insertsomevalueshere\" containsawesomeness=\"1\" Score=\"-97961\" somedatatype=\"1\" typeofData=\"VAL\" web=\"1\">
Put these lines of code before the line of code which does your web request:
web_reg_save_param_regexp("ParamName=importantid","Regexp=<important id=\\\"(.*?)\\\"",LAST);
web_reg_save_param_regexp("ParamName=ValueType","Regexp= ValueType=\\\"(.*?)\\\"",LAST);
You will then have two stored parameters 'importantid' and 'ValueType'
Dynamic number of elements to correlate? Your path for resubmission is through web_custom_request(). You will need to build the string you need dynamically with the name:value pairs for all of the data which needs to be included.
This path will place a premium on your string manipulation skills in the language of the tool. The default path is through C, but you have other language options if your skills are more refined in another language.
Can I determine if the user entered a phone number that can be safely formatted into E164?
For Germany, this requires that the user started his entry with a local area code. For example, 123456 may be a subscriber number in his city, but it cannot be formatted into E164, because we don't know his local area code. Then I would like to keep the entry as it is. In contrast, the input 089123456 is independent of the area code and could be formatted into E164, because we know he's from Germany and we could convert this into +4989123456.
You can simply convert your number into E164 using libphonenumber
and after conversion checks if both the strings are same or not. If they're same means a number can not be formatted, otherwise the number you'll get from library will be formatted in E164.
Here's how you can convert
PhoneNumberUtil phoneUtil = PhoneNumberUtil.getInstance();
String formattedNumber = phoneUtil.format(inputNumber, PhoneNumberFormat.E164);
Finally compare formattedNumber with inputNumber
It looks as though you'll need to play with isValidNumber and isPossibleNumber for your case. format is certainly not guaranteed to give you something actually dialable, see the javadocs. This is suggested by the demo as well, where formatting is not displayed when isValidNumber is false.
I also am dealing with this FWIW. In the context of US numbers: The issue is I'd like to parse using isPossibleNumber in order to be as lenient as possible, and store the number in E164. However then we accept, e.g. +15551212. This string itself even passes isPossibleNumber despite clearly (I think) not being dialable anywhere.
I have some existing Visual C++ code where I need to add the conversion of wide character strings to upper or lower case.
I know there are pitfalls to this (such as the Turkish "I"), but most of these can be ironed-out if you know the language. Fortunately in this area of code I know the LCID value (locale ID) which I guess is the same as knowing the language.
As LCID is a Windows type, is there a Windows function that will convert wide strings to upper or lower case?
The C runtime function _towupper_l() sounds like it would be ideal but it takes a _locale_t parameter instead of LCID, so I guess it's unsuitable unless there is a completely reliable way of converting an LCID to a _locale_t.
The function you're searching for is called LCMapString and it is part of the Windows NLS APIs. The LCMAP_UPPERCASE flag maps characters to uppercase, while the LCMAP_LOWERCASE maps characters to lowercase.
For applications targeting Windows Vista and later, there is an Ex variant that works on locale names instead of identifiers, which are what Microsoft now says you should prefer to use.
In fact, in the CRT implementation provided with VS 2010 (and presumably other versions as well), functions such as _towupper_l ultimately end up calling LCMapString after they extract the locale ID (LCID) from the specified _locale_t.
If you're like me, and less familiar with the i8n APIs than you should be, you probably already know about the CharUpper, CharLower, CharUpperBuff, and CharLowerBuff family of functions. These have been the old standbys from the early days of Windows for altering the case of chars/strings, but as their documentation warns:
Note that CharXxx always maps uppercase I to lowercase I ("i"), even when the current language is Turkish or Azeri. If you need a function that is linguistically sensitive in this respect, call LCMapString.
What it neglects to mention is filled in by a couple of posts on Michael Kaplan's wonderful blog on internationalization issues: What does "linguistic casing" mean?, How best to alter case. The executive summary is that you achieve the same results as the CharXxx family of functions by calling LCMapString and not specifying the LCMAP_LINGUISTIC_CASING flag, whereas you can be linguistically sensitive by ensuring that you do specify the LCMAP_LINGUISTIC_CASING flag.
Sample code:
std::wstring test("Does my code pass the Turkey test?");
if (!LCMapStringW(lcid, /* your LCID, defined elsewhere */
LCMAP_UPPERCASE | LCMAP_LINGUISTIC_CASING,
test.c_str(), /* input string */
test.length(), /* length of input string */
&test[0], /* output buffer (can reuse input) */
test.length())) /* length of output buffer (same as input) */
{
// Uh-oh! Something went wrong in the call to LCMapString, so you need to
// handle the error somehow here.
// A good start is calling GetLastError to determine the error code.
}
I'm trying to develop an input real-time verification on a textfield in a Java applet.
The idea would be to have an input field that, if empty, once the user clicks in it it would show something like "0,00". Once the user starts to press the keys, only numbers should be accepted, and it would start to fill the text like this (imagine I input the numbers:
1,2,3,4,5,6):
"0,01" -> "0,12" -> "1,23" -> "12,34" -> "123,45" -> "1.234,56".
If the field is not empty the user can change the values but there will always be a "," dividing the decimal numbers.
I've been able to allow only numbers to be accepted but how can produce this kind of behavior? I know this may be a very specific question but any links or examples would be much appreciated. Thank you.
You will have to provide an input handler, that not only filters the input, but also calls a preset callback (made by you), that will update the required field in the way you want it to be updated.
You can use some functions, that can format numbers, given a specific format.
Basically, just keep a count on number of digits, already input, then parse it as a plain integer then multiply it by a power of 10, derived from the format, in your example would be something like 10 raised to the power of (numberOfInputDigits -2).