I have few files stored in a database, these files were fetched from a FTP server and processed.
I am trying to move these files to archive directory on FTP server and to do that I am using producerTemplate.
This is what I have done so far.
try {
DefaultCamelContext camelContext = new DefaultCamelContext();
ProducerTemplate template = camelContext.createProducerTemplate();
template.request("ftp://xxxxx/include=fileFromDb.xml&move=archive/fileFromDb.xml", outExchange -> {
String body = outExchange.getIn().getBody(String.class);
});
} catch (Exception ex) {
// update the status in database to indicate archive failed
}
But this is failing with following error and can't get this resolved.
WARN o.a.c.c.f.remote.RemoteFileProducer - Writing file failed with: Cannot write null body to file: archive/ID-192-168-1-113-tpgi-com-au-1627667653835-1-2
I have tried implementing solutions from other answers but they didn't worked for either.
If I write a custom route like below, it works fine but because I need perform post move actions I prefere using producer template.
from("ftp://xxxxx/include=fileFromDb.xml&move=archive/fileFromDb.xml")
.log("file moved successfully").
If I write a custom route like below, it works fine but because I need perform post move actions I prefere using producer template.
You could use onCompletion to call another route to handle the post move actions.
String sftpURI = "sftp:localhost:2222/upload" +
"?username="+username+"&password="+password
+ "&move=done";
String sftpPostMoveURI = "sftp:localhost:2222/upload/done" +
"?username="+username+"&password="+password
+ "&fileName=${headers.CamelFileName}";
from(sftpURI)
.routeId("ReadFileUsingSFTPRoute")
.onCompletion().onCompleteOnly()
.setBody().constant("")
.to("direct:postMoveActions")
.end()
.log("file ${headers.CamelFileName} moved");
from("direct:postMoveActions")
.routeId("PostMoveActionsRoute")
.log("doing post move actions!")
.pollEnrich().simple(sftpPostMoveURI).timeout(5000)
.log("File: ${body}");
I want to change the creation date on a Google Drive PDF file. So, how can I achieve this?
public static File SetLastModified(string fileID, DateTime lastModified)
{
File file = DriveService.Files.Get(fileID).Fetch();
file.ModifiedDate = lastModified.ToString("yyyy'-'MM'-'dd'T'HH':'mm':'ss.fff'Z'");
try
{
FilesResource.UpdateRequest request = DriveService.Files.Update(file, fileID);
request.SetModifiedDate = true;
file = request.Fetch();
}
catch (Exception e)
{
throw;
}
return file;
}
It is not possible to change the creation date of a file using Files:update() method
If you will check the request body for Files:update() , you can only modify the parameters listed in the table provided in the document. createdTime property is not included in the list.
The one being modified in your sample code is the modifiedTime property which is included in the list of editable properties.
If you want to have a file with a specified createdTime, you need to create a new file using Files:create(). createdTime can be modified as part of the request body
Additional Reference:
Drive API Quickstart - Setup Drive API for different platforms
Drive API - How to create Files
How do I pass the selected value from the first dropdown to the second drop down ?
this is the link I am following [link][1]
// Import the JsonSlurper class to parse Dockerhub API response
import groovy.json.JsonSlurper
// Set the URL we want to read from, it is MySQL from official Library for this example, limited to 20 results only.
docker_image_tags_url = "https://hub.docker.com/v2/repositories/library/mysql/tags/?page_size=20"
try {
// Set requirements for the HTTP GET request, you can add Content-Type headers and so on...
def http_client = new URL(docker_image_tags_url).openConnection() as HttpURLConnection
http_client.setRequestMethod('GET')
// Run the HTTP request
http_client.connect()
// Prepare a variable where we save parsed JSON as a HashMap, it's good for our use case, as we just need the 'name' of each tag.
def dockerhub_response = [:]
// Check if we got HTTP 200, otherwise exit
if (http_client.responseCode == 200) {
dockerhub_response = new JsonSlurper().parseText(http_client.inputStream.getText('UTF-8'))
} else {
println("HTTP response error")
System.exit(0)
}
// Prepare a List to collect the tag names into
def image_tag_list = []
// Iterate the HashMap of all Tags and grab only their "names" into our List
dockerhub_response.results.each { tag_metadata ->
image_tag_list.add(tag_metadata.name)
}
// The returned value MUST be a Groovy type of List or a related type (inherited from List)
// It is necessary for the Active Choice plugin to display results in a combo-box
return image_tag_list.sort()
} catch (Exception e) {
// handle exceptions like timeout, connection errors, etc.
println(e)
}
I have another active choice box groovy script,expecting a value from the above dropdown
box. I have tried
env = params.mysql_image_version
// def env="dev" // this works but I am hard coding the value ,instead of getting it dynamically from the above dropdown box
env_list.each { env ->
stack_list.add(github_response.get("dev"))
}
print stack_list
Below is a script that helps me build an extentreport for jmeter. It is a JSR223 PostProcessor element. It's working nicely however, the problem is that I have it duplicated after every HTTP Request in the script. I have several scripts with 100's of HTTP requests that would need essentially a copy of the same PostProcessor groovy script. This = hard to maintain!
I have tried splitting common parts into an external groovy script that I tried calling on the JSR223 PostProcessor. I also tried chunking up the bits of the script and putting the values into a csv so that I could just update the csv values if anything changed.
I'm sure there's a cleaner/better way to do this but I'm still learning so I'm not sure of the best way to make this easier to maintain. Here's the JSR223 PostProcessor. The only bit that changes with each http request is the "//test result" section
import com.relevantcodes.extentreports.ExtentReports;
import com.relevantcodes.extentreports.ExtentTest;
import com.relevantcodes.extentreports.LogStatus;
import java.io.File;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import java.util.Properties;
//configure object for response data
def response = prev.getResponseDataAsString();
//configure extentreports objects
ExtentReports report;
ExtentTest testLogger;
//set location for file and report config
String resultsPath = "C:/portalQA/Automation/Results/";
String configPath = "C:/portalQA/Automation/JMeter/TestReportConfig/";
String reportPath =
resultsPath+"Login_Results_${reportDate}_${currentTime}_${testenv}.html";
File file = new File(reportPath);
if (!file.exists()) {
//if file does not exist, create it
report = new ExtentReports(reportPath, true);
report.loadConfig( new File(configPath+"extent-config.xml"));
} else {
//else append to existing report
report = new ExtentReports(reportPath, false);
report.loadConfig( new File(configPath+"extent-config.xml"));
}
//test result
testLogger = report.startTest("Authenticate");
testLogger.assignCategory("Initialize Session");
if (response.contains("com.blah.portal.model.User")) {
testLogger.log(LogStatus.PASS, "Logged in with: ${username}");
testLogger.log(LogStatus.INFO, response);
} else {
testLogger.log(LogStatus.FAIL, "Could not authenticate session");
testLogger.log(LogStatus.INFO, response);
}
log.info("Authenticate");
print("Authenticate print");
report.endTest(testLogger);
report.flush();
I see two options:
I suggest using JSR223 Listener instead. First of all, that way you will only have 1 listener in your script, which resolves your original problem, but it is a better option for writing into file in general, since listener has only one instance for all running threads, so you won't be creating a race condition when writing to file.
If you rather have a post-processor, you can put it on higher level (not under any particular sampler) which will cause it to run after each request within the same scope or below.
For example, configuration like
Thread Group
Post-processor
Sampler 1
...
Sampler N
Will cause Post-processor to run after each Sampler 1...Sampler N
In both cases you may need to check which sampler you are processing, and skip those you don't want to add to your report (easiest way to do it, is to come up with some name convention for excluded samplers)
I also faced the same challenge. In my case I need to check if JSON response from REST service was correct. I solved it in the following way.
I've created a JSR223 PreProcessor under the script root. It contains my custom class to handle JSON parsing and asserts.
import groovy.json.JsonSlurper
import org.apache.jmeter.assertions.AssertionResult
class CustomAssert {
def parseResponse(json) {
def jsonSlurper = new JsonSlurper()
return jsonSlurper.parseText(json)
}
def assertResult(assertionResult, expectedResult, actualResult) {
if (!expectedResult.equals(actualResult)) {
assertionResult.setFailure(true);
assertionResult.setFailureMessage("Expected ${expectedResult} but was ${actualResult}");
}
}
}
vars.putObject('customAssert', new CustomAssert())
Note the last line:
vars.putObject('customAssert', new CustomAssert())
I put an instance of my CustomAssert to vars.
Then under my HTTP Requests I've added JSR233 Assertion
def a = vars.getObject('customAssert')
def response = a.parseResponse(prev.getResponseDataAsString())
a.assertResult(AssertionResult, 'DRY', response.sensorResultHolderUIs[0].result.toString())
a.assertResult(AssertionResult, 'DRY', response.sensorResultHolderUIs[1].result.toString())
a.assertResult(AssertionResult, 'DRY', response.sensorResultHolderUIs[2].result.toString())
It basically retrieves the instance of CustomAssert from vars and calls its methods. I can put as many JSR233 Assertions as I want. The only code that is copied is those two lines on top:
def a = vars.getObject('customAssert')
def response = a.parseResponse(prev.getResponseDataAsString())
To sum up:
Take the common part of your code (that doesn't have to be copied).
Wrap it in a class.
Put the class in JSR233 PreProcessor under the root and export its instance via vars
Take the rest of your code and adjust it to use class defined in 2.
Put that code in as many JSR233 Assertions as you want remembering to retrieve the instance created in 3. from vars
Thank you user1053510. Your advice lead me to build my own JSR223 Listener that renders the report. Below is the code in my JSR223 Listener:
import com.aventstack.extentreports.*;
import com.aventstack.extentreports.reporter.*;
import com.aventstack.extentreports.markuputils.*;
ExtentHtmlReporter htmlReporter;
ExtentReports extent;
ExtentTest test;
// create the HtmlReporter
htmlReporter = new ExtentHtmlReporter("C:/AUTO_Results/Results_${testApp}_${reportDate}_${currentTime}_${testenv}.html");
//configure report
htmlReporter.config().setCreateOfflineReport(true);
htmlReporter.config().setChartVisibilityOnOpen(true);
htmlReporter.config().setDocumentTitle("${testApp} Results");
htmlReporter.config().setEncoding("utf-8");
htmlReporter.config().setReportName("${testApp} Results ${reportDate}_${currentTime}_${testenv}");
htmlReporter.setAppendExisting(true);
// create ExtentReports
extent = new ExtentReports();
// attach reporter to ExtentReports
extent.attachReporter(htmlReporter);
extent.setReportUsesManualConfiguration(true);
// Show Env section and set data on dashboard
extent.setSystemInfo("Tool","JMeter");
extent.setSystemInfo("Test Env","${testenv}");
extent.setSystemInfo("Test Date","${reportDate}");
extent.setSystemInfo("Test Time","${currentTime}");
//stringify test info
String threadName = sampler.getThreadName();
String samplerName = sampler.getName();
String requestData = props.get("propRequestData");
String respCode = props.get("propRespCode");
String respMessage = props.get("propRespMessage");
String responseData = props.get("propResponse");
// create test
test = extent.createTest(threadName+" - "+samplerName);
//test.assignCategory("API Testing");
// analyze sampler result
if (vars.get("JMeterThread.last_sample_ok") == "false") {
log.error("FAILED: "+samplerName);
print("FAILED: "+samplerName);
test.fail(MarkupHelper.createLabel("FAILED: "+sampler.getName(),ExtentColor.RED));
} else if (vars.get("JMeterThread.last_sample_ok") == "true") {
if(responseData.contains("#error")) {
log.info("FAILED: "+sampler.getName());
print("FAILED: "+sampler.getName());
test.fail(MarkupHelper.createLabel("FAILED: "+sampler.getName(),ExtentColor.RED));
} else if (responseData.contains("{")) {
log.info("Passed: "+sampler.getName());
print("Passed: "+sampler.getName());
test.pass(MarkupHelper.createLabel("Passed: "+sampler.getName(),ExtentColor.GREEN));
}
} else {
log.error("Something is really wonky");
print("Something is really wonky");
test.fatal("Something is really wonky");
}
//info messages
test.info("RequestData: "+requestData);
test.info("Response Code and Message: "+respCode+" "+respMessage);
test.info("ResponseData: "+responseData);
//playing around
//markupify json into code blocks
//Markup m = MarkupHelper.createCodeBlock(requestData);
//test.info(MarkupHelper.createModal("Modal text"));
//Markup mCard = MarkupHelper.createCard(requestData, ExtentColor.CYAN);
// test.info("Request "+m);
// test.info(mCard);
// test.info("Response Data: "+MarkupHelper.createCodeBlock(props.get("propResponse")));
// test.info("ASSERTION MESSAGE: "+props.get("propAssertion"));
// end the reporting and save the file
extent.flush();
Then in each threadgroup I have a BeanShell Assertion with these lines:
//request data
String requestData = new String(prev.SamplerData);
//String requestData = new String(requestData);
props.put("propRequestData", requestData);
//response data
String respData = new String(prev.ResponseData);
//String respData = new String(prev.getResponseDataAsString());
props.put("propResponse", respData);
//response code
String respCode = new String(prev.ResponseCode);
props.put("propRespCode",respCode);
//response message
String respMessage = new String(prev.ResponseMessage);
props.put("propRespMessage",respMessage);
error :_ jmeter.util.BeanShellInterpreter: Error invoking bsh method: eval org/json/simple/JSONArray
Import java method from project jar file which is placed in lib folder.
source code on written for pass json value in arraylist:
import jsonresponse.common.JsonResponseProcessor;
import assertions.AssertResponse;
import databaseresponse.common.DbResponseProcessors;
import org.json.simple.JSONArray;
String resJson = prev.getResponseDataAsString();
String res = resJson.get("queueId");
log.info("----->>>>"+resJson);
ArrayList list1 = new ArrayList();
list1.add("queueId");
list1.add("name");
list1.add("faxNumber");
list1.add("description");
list1.add("type");
ArrayList list2 = new ArrayList();
list2.add("userId");
ArrayList list3 = new ArrayList();
list3.add("agencyId");
ArrayList list4 = new ArrayList();
list4.add("usertypeId");
JsonResponseProcessor obj = new JsonResponseProcessor();
System.out.println("%%%%%%%%%%%%%%fgfggfffgf%%%%%%%%%%%%%%%");
ArrayList Jsoin = obj.getvalueofsubmapoflist(resJson,".result[0]",list1);
System.out.println("%%%%%%%%%%%%%%%%%%%%%%%%%%%%%" +Jsoin);
log.info(">>>"+Jsoin);
Make sure you have all referenced .jar files in JMeter classpath (i.e. copy them to JMeter's "lib" folder). Don't forget to restart JMeter to pick the jars up
If you still experience issues try putting your code inside try block like:
try {
//your code here
}
catch (Throwable ex) {
log.error("Problem in Beanshell", ex);
throw ex;
}
This way you'll have informative stacktrace printed to jmeter.log file.
One more way to get more information regarding your Beanshell script is putting debug(); directive to the beginning of your code. If will trigger debugging output into stdout
See How to Use BeanShell: JMeter's Favorite Built-in Component article for more information on using Java and JMeter APIs from Beanshell test elements in JMeter tests.