This question already has answers here:
Why can I refer to a variable outside of an if/unless/case statement that never ran?
(3 answers)
Closed 5 years ago.
Recently I found out that a non-evaluated line, in Ruby, still assigns nil to the variable.
2.3.4 (main):0 > defined? this_never_seen_variable_before
=> nil
2.3.4 (main):0 > this_never_seen_variable_before = "value" if false
=> nil
2.3.4 (main):0 > defined? this_never_seen_variable_before
=> "local-variable"
2.3.4 (main):0 >
2.3.4 (main):0 > this_never_seen_variable_before_2
NameError: undefined local variable or method `this_never_seen_variable_before_2' for main:Object
from (pry):119:in `<main>'
2.3.4 (main):0 > this_never_seen_variable_before_2 = "value" if false
=> nil
2.3.4 (main):0 > this_never_seen_variable_before_2
=> nil
2.3.4 (main):0 >
Would anyone have more information about it?
Before your Ruby code can be run, it must first be parsed, and it's at this stage that the behavior you're experiencing originates.
As the parser scans through the code, whenever it encounters a declaration (foo = 'something') it allocates space for that variable by setting its value to nil. Whether that variable declaration is actually executed in the context of your code is irrelevant. For example:
if false
foo = 42
end
p foo
#=> nil
In the above code's logic foo is never declared, however it's space in memory is recognized and allocated for by Ruby when the code is parsed out.
Hope this helps!
Related
Today I came across an interesting piece of code. It's more like a scientific question about the ruby parser.
We know everything in ruby is an object and every expression evaluates at least to nil.
But how is the following "assignment" parsed:
somevar
NameError: undefined local variable or method 'somevar' for main:Object
somevar = "test" if false
=> nil
somevar
=> nil
You see the variable is undefined until it's used in the assignment. But the assignment is not happening because of the condition. Or is it happening because the condition evaluates to nil? I tried something which would break in this case, but it just works:
a = {}
a[1/0]
ZeroDivisionError: divided by 0
a[1/0] = "test" if false
=> nil
So is this meant to work the way it is? Or does it make sense to test the variable (defined?(somevar)) before accessing, in case a future version of ruby will break this behaviour? As example by saving the assigned pointer to this variable.
My currently used ruby version is 3.0.2.
This is expected behavior in Ruby. Quote from the Ruby docs:
The local variable is created when the parser encounters the assignment, not when the assignment occurs:
a = 0 if false # does not assign to a
p local_variables # prints [:a]
p a # prints nil
If you do = "test" if false it evaluates to nil => no assignment needed. But by calling somevar = ... you told the interpreter to declare the name somevar. The nil aren't the same (if that makes sense).
The [] operator however doesn't declare a variable (only accesses) but since if false isn't true there is no assignment so the whole left side isnt evaluated.
Consider:
a = [1,2,3]
a[1] = "test" if false
a
=> [1,2,3]
a[1] is neither nil nor test.
Not sure what you expect or how future Ruby will break this?
This question already has answers here:
Why can I refer to a variable outside of an if/unless/case statement that never ran?
(3 answers)
Closed 5 years ago.
We define a function foo:
def foo(s)
case s
when'foo'
x = 3
puts x.inspect
when 'bar'
y = 4
puts y.inspect
end
puts x.inspect
puts y.inspect
end
We then call it as follows:
1.9.3p194 :017 > foo('foo')
in foo scope
3
in outer scope
3
nil
=> nil
1.9.3p194 :018 > foo('bar')
in bar scope
3
in outer scope
nil
3
=> nil
Why does the function not throw an error about an unregistered local variable in either case? In the first case, the variable y seems like it should not exist, so you can't call inspect on it in the outer scope; the same for x in the second case.
Here's another similar example:
def test1
x = 5 if false
puts x.inspect
end
def test2
puts x.inspect
end
And then:
1.9.3p194 :028 > test1
nil
=> nil
1.9.3p194 :029 > test2
NameError: undefined local variable or method `x' for main:Object
What's going on here? It seems like Ruby is hoisting the variable declaration into the outer scope, but I wasn't aware that this is something Ruby does. (Searching for "ruby hoisting" only turns up results about JavaScript hoisting.)
When the Ruby parser sees the sequence identifier, equal-sign, value,
as in this expression
x = 1
it allocates space for a local variable called x. The creation of the
variable—not the assignment of a value to it, but the internal
creation of a variable—always takes place as a result of this kind of
expression, even if the code isn’t executed! Consider this example:
if false
x = 1
end
p x # Output: nil
p y # Fatal Error: y is unknown
The assignment to x isn’t executed, because it’s wrapped in a failing
conditional test. But the Ruby parser sees the sequence x = 1, from
which it deduces that the program involves a local variable x. The
parser doesn’t care whether x is ever assigned a value. Its job is
just to scour the code for local variables for which space needs to
be allocated. The result is that x inhabits a strange kind of variable limbo.
It has been brought into being and initialized to nil.
In that respect, it differs from a variable that has no existence at
all; as you can see in the example, examining x gives you the value
nil, whereas trying to inspect the non-existent variable y results
in a fatal error. But although x exists, it has not played any role in
the program. It exists only as an artifact of the parsing process.
Well-Grounded Rubyist chapter 6.1.2
The ruby parser goes through every lines and set to nil all variable =. The code being actually executed or not does not matter.
See Why can I refer to a variable outside of an if/unless/case statement that never ran?
This question already has answers here:
Confusion with the assignment operation inside a falsy `if` block [duplicate]
(3 answers)
Closed 5 years ago.
Try the following in irb: (I'm using Ruby 2.0.0-p247)
blah
#=> NameError: undefined local variable or method `blah' for main:Object
if false
blah = 'blah'
end
#=> nil
blah
#=> nil
I'm surprised that blah is assigned nil even when the if condition evaluates to false.
I thought the code within if is skipped as the condition evaluates to false.
Could someone with Ruby internals knowledge kindly explain how this happened?
Thank you
Local variables in ruby are created during parsing/compilation of code (not execution). They are lexically scoped, so a local variable is not visible before the line where it's assigned to.
defined?(foo) # => nil
if false
defined?(foo) # =>
foo = 'blah'
defined?(foo) # =>
end
defined?(foo) # => "local-variable"
foo # => nil
defined?(foo) lines inside of if return nothing, because they didn't run. The assignment wasn't executed as well. However, the compiler saw the assignment to local variable and created one (with default value of nil).
This behaviour explains the trick from WAT talk:
a = a # => nil
Even though variable a doesn't exist, it is created (and set to nil) right before this line, simply because there is an assignment expression in the code (target of which is yet unknown local variable). So by the time the right hand side of this expression is evaluated, a exists.
This question already has answers here:
Undefine variable in Ruby
(5 answers)
Closed 9 years ago.
I want to destroy a variable in ruby as if it had never existed. Here is an example:
> defined? a
=> "nil"
> a = 1
> defined? a
=> "local-variable"
Now I need to set variable a to "nil" when I do defined?.
I tried some things like:
> a = nil #Not working
=> nil
> defined? a
=> "local-variable"
But nothing seems to work.
As of now (MRI 2.2 and before), there's no way to do this.
This question already has answers here:
Why can I refer to a variable outside of an if/unless/case statement that never ran?
(3 answers)
Closed 5 years ago.
We define a function foo:
def foo(s)
case s
when'foo'
x = 3
puts x.inspect
when 'bar'
y = 4
puts y.inspect
end
puts x.inspect
puts y.inspect
end
We then call it as follows:
1.9.3p194 :017 > foo('foo')
in foo scope
3
in outer scope
3
nil
=> nil
1.9.3p194 :018 > foo('bar')
in bar scope
3
in outer scope
nil
3
=> nil
Why does the function not throw an error about an unregistered local variable in either case? In the first case, the variable y seems like it should not exist, so you can't call inspect on it in the outer scope; the same for x in the second case.
Here's another similar example:
def test1
x = 5 if false
puts x.inspect
end
def test2
puts x.inspect
end
And then:
1.9.3p194 :028 > test1
nil
=> nil
1.9.3p194 :029 > test2
NameError: undefined local variable or method `x' for main:Object
What's going on here? It seems like Ruby is hoisting the variable declaration into the outer scope, but I wasn't aware that this is something Ruby does. (Searching for "ruby hoisting" only turns up results about JavaScript hoisting.)
When the Ruby parser sees the sequence identifier, equal-sign, value,
as in this expression
x = 1
it allocates space for a local variable called x. The creation of the
variable—not the assignment of a value to it, but the internal
creation of a variable—always takes place as a result of this kind of
expression, even if the code isn’t executed! Consider this example:
if false
x = 1
end
p x # Output: nil
p y # Fatal Error: y is unknown
The assignment to x isn’t executed, because it’s wrapped in a failing
conditional test. But the Ruby parser sees the sequence x = 1, from
which it deduces that the program involves a local variable x. The
parser doesn’t care whether x is ever assigned a value. Its job is
just to scour the code for local variables for which space needs to
be allocated. The result is that x inhabits a strange kind of variable limbo.
It has been brought into being and initialized to nil.
In that respect, it differs from a variable that has no existence at
all; as you can see in the example, examining x gives you the value
nil, whereas trying to inspect the non-existent variable y results
in a fatal error. But although x exists, it has not played any role in
the program. It exists only as an artifact of the parsing process.
Well-Grounded Rubyist chapter 6.1.2
The ruby parser goes through every lines and set to nil all variable =. The code being actually executed or not does not matter.
See Why can I refer to a variable outside of an if/unless/case statement that never ran?