Angular/RxJS Should I unsubscribe on every ajax call? - ajax

Should I unsubscribe on every ajax call? According to the RxJS contract, I should. Because AJAX calls are not streams or events, once they are done they are done. What is the reason of using RxJS at all in this particular case? Overtime it becomes the mess (I know about takeUntil, that's not the point here).
public remove(data: IData): void {
// unsubscribe from the previous possible call
if (this.dataSubscription &&
this.dataSubscription.unsubscribe) {
this.dataSubscription.unsubscribe();
}
this.dataSubscription = this.dataService
.delete(data.id)
.subscribe(() => {
this.refresh();
});
}
public ngOnDestroy(): void {
// unsubscribe on deletion
if (this.dataSubscription &&
this.dataSubscription.unsubscribe) {
this.dataSubscription.unsubscribe();
}
}
What is the advantage over simple promise, that looks cleaner and destroyed right after execution?
public remove(data: IData): void {
this.dataService
.delete(data.id)
.then(() => {
this.refresh();
});
}
This is DataService code
#Injectable()
export class DataService {
constructor(private _httpClient: HttpClient) { }
public delete(id: number): Observable<IModel> {
return this._httpClient.delete<IModel>(`${this._entityApiUrl}/${id}`);
}
}

Finite, cold Observables usually don't need to be unsubscribed. They work just like Promises in this regard. Assuming you're using Angular's HttpClient in your service, no unsubscription is necessary--it's much like a Promise in that situation.
First off, to clear some things up -- in your Promise example, you are imperatively managing the Promise by assigning it to this.dataSubscription. After that call is made, anything that calls this.dataSubscription.then() an arbitrary amount of time after the HTTP call will receive a Promise.resolve() and invoke that .then() function. The new Promise returned by Promise.resolve() will be cleaned up after it executes, but it's only until your class is destroyed that your this.dataSubscription Promise will be cleaned up.
However, not assigning that Promise as a property is even cleaner:
public remove(data: IData): void {
this.dataService
.delete(data.id)
.then(() => {
this.refresh();
});
}
plus, the Promise will be cleaned up at the end of its scope, not on the destruction of the class.
Observables, at least finite 'Promise-like' ones like this, work in much the same way. You don't need to manage the Subscription returned buy the .subscribe() method imperitavely, as it will execute and then be cleaned up as it's not assigned as a property:
public remove(data: IData): void {
this.dataService
.delete(data.id)
.subscribe(() => {
this.refresh();
});
}
It's a finite Observable and completes after the subscription, so calling subscribe again will return a new Subscription and re-call the Observable's function.
Imperitavely managing those subscriptions is indeed messy and usually a sign things could be done better.
The difference with RXJS's subscription management is that RXJS can become an incredibly powerful tool, one that is useful for way, way more than managing async AJAX calls. You can have hot Observables that publish data to hundreds of subscribers, Subjects that manage their own stream to many subscribers, infinite Observables that never stop emitting, higher-order Observables that manage state and return other Observables, etc. In this case unsubscribing is best practice, but honestly not going to cause performance issues outside of extreme cases.
A good comparison is the Observable.fromEvent() property. Just like it's best practice to use removeEventListener correctly after addEventListener, you should unsubscribe from this Observable correctly. However, just like removeEventListener,...it's not really done all the time and usually doesn't cause issues with today's platforms.
Also, in reference to the 'RxJS contract' that was stated: here's an excerpt from the same doc:
When an Observable issues an OnError or OnComplete notification to its observers, this ends the subscription. Observers do not need to issue an Unsubscribe notification to end subscriptions that are ended by the Observable in this way.
Finite Observables complete themselves after their emissions and don't need to be unsubscribed.

Usually you don't need to unsubscribe from HttpClient calls since all HttpClient calls complete the stream once they receive response from the server. Once an observable stream completes or errors, its the responsibility of the producer to release resources. For more information, read Insider’s guide into interceptors and HttpClient mechanics in Angular. You should unsubscribe only if you want to cancel the request.
Because AJAX calls are not streams or events, once they are done they are done... What is the advantage over simple promise, that looks cleaner and
destroyed right after execution?
AJAX calls are not just one time event. For example, you can have multiple progress events with XHR. Promise resolves with only one value, while HttpClient can emit multiple HTTP events:
export type HttpEvent<T> =
HttpSentEvent | HttpHeaderResponse | HttpResponse<T>| HttpProgressEvent | HttpUserEvent<T>

You don't need to unsubscribe on every ajax call. But then you are losing one of the core benefits of Observables - being able to cancel it.
You really need to think about what your code does and what is your standard workflow. What happens if the delete response takes a long time and user clicks it again, or clicks back, or goes to some other page?
Would you like refresh to still happen (since observable will still keep the callback in the memory) or would you rather cancel it?
It's up to you and your application at the end. By using unsubscribe you save yourself from unplanned side effects.
In your case, it's just a refresh so it's not a big deal. Then again, you will keep it in the memory and it might cause some side effects.

Related

Is using RxJS pipe(take(1)) a suitable way to return an Observable with a single value?

I have a NestJS application, and need to send an HTTP request to another server, so I am using the HttpModule (#nestjs/axios).
I need the data from that request, but the returned type is <Observable<AxiosResponse<any,any>>, where I need just the AxiosResponse.
Reading over the RxJS documentation, it looks like the prescribed way to handle this situation is to make use of RxJS lastValueFrom() or firstValueFrom(), after the deprecation of toPromise().
However, there is a warning attached:
Only use lastValueFrom function if you know an Observable will eventually complete. The firstValueFrom function should be used if you know an Observable will emit at least one value or will eventually complete. If the source Observable does not complete or emit, you will end up with a Promise that is hung up, and potentially all of the state of an async function hanging out in memory. To avoid this situation, look into adding something like timeout, take, takeWhile, or takeUntil amongst others.
The solution that I came up with was:
const response = this.httpService.post('the-url').pipe(take(1))
const axiosResponse: AxiosResponse = await lastValueFrom(response)
TypeScript at least is not complaining. Is this a suitable way to get at the underlying Axios response?
A promise once triggered will only get resolved or rejected once. Once it's resolved the observable is completed. It is one of the major differences between promise and observable which has capability to emit multiple times like callback.
Therefore there is no need to add pipe(take(1)), just use lastValueFrom is sufficient
If you construct an observable from a promise you don't need lastValueFrom nor take. Once subscribed to, it emits once then completes immediately:
const {from} = rxjs;
const answer$ = from(Promise.resolve(42));
answer$.subscribe({
next(x) {
console.log(`answer=${x}`);
},
complete() {
console.log('done');
}
});
<script src="https://unpkg.com/rxjs#%5E7/dist/bundles/rxjs.umd.min.js"></script>

Do RxJS observers always process all events submitted before the observable is completed?

I want to make sure that all events, which were submitted before complete was invoked on the observable, are logged.
I'm aware that operators exist that stop emission of events (takeUntil, etc.) completely.
The question that I have is whether other operators exist which would lead to emissions not being sent if the complete on the subject is sent too 'early'. Are there cases where it would be beneficial to wait with the completion of the observable until the event was handled by the observer?
For example, are there situations (imagine any other RxJS operator instead of the delay) where the following code ...
const subj = new Subject<string>();
subj.pipe(delay(500))
.subscribe((val) => {
console.log(val);
subj.complete();
});
subj.next('1');
... makes more sense than that ...
const subj = new Subject<string>();
subj.pipe(delay(500))
.subscribe((val) => {
console.log(val);
});
subj.next('1');
subj.complete();
... when the subject should only emit one value?
Or is completing the subject immediately after next always safe in such situations?
If there are other factors I'm not aware of (e.g. synchronous vs. asynchronous execution of code) please mention them as well.
In general,
subj.next('1');
subj.complete();
is safe. As far as I know, none of the existing RxJS operators use a completion to cancel/unsubscribe observables early.
That being said, I can easily create such an operator myself. switchMap will cancel currently running inner observables when it receives it's next emission. You could, for example, create a custom operator that unsubscribes and exists early when it receives a complete event.
If your worried about that, however, you're out of luck. No matter what workaround you imagine, I can probably write an operator that will ruin your code. For example filter(_ => false) will stop the 1 from being emitted before the complete in either of the two cases you've described.
In the end, you and your coworkers must write good code (and test!) and RxJS doesn't change that.

Should I unsubscribe after complete invoked in rxjs?

In rxjs, if the complete method is invoked should I also invoke unsubscribe?
For example I have a timer from rxjs and I set to 5 seconds.
After the subscribe function is invoked should I run also unsubscribe from the timer?
import { timer } from "rxjs";
const token = timer(5 * 1000).subscribe({
next: () => {
console.log("xxx");
token.unsubscribe(); // <---- should I do it to to free memory?
},
complete: () => {
console.log("aaa");
}
});
The question:
if the complete method is invoked should I also invoke unsubscribe?
No. An observable can only complete or error once. A completed or errored observable is done. There's no need to unsubscribe.
Timer, as invoked above, will only emit once and then complete. Unless you want to cancel the timer, there's no need to unsubscribe. If you give the timer a second argument, then it changes to act more like interval. Then you must unsubscribe.
Generalized:
Any short-lived observable will complete on its own. This is the case with promises, HTTP calls, observables created with of or from(array). These generally don't need to be unsubscribed unless some business logic dictates otherwise.
Long-lived observables don't complete on their own and must be managed somehow. User interactions tend to have no defined end (Think DOM events like button clicks). intervals have no defined end as well.
How to unsubscribe
The best solutions will be those that use operators that handle subscription/unsubscription on your behalf. They require no extra cognitive load in the best circumstances and manage to contain/manage errors relatively well (less spooky action at a distance) in the more exotic circumstances.
Most higher-order operators do this (concat, merge, concatMap, switchMap, mergeMap, ect). Other operators like take, takeUntil, takeWhile, ect let you use a more declarative style to manage subscriptions.
Where possible, these are preferable as they're all less likely to cause strange errors or confusion within a team that is using them.
Of course you should unsubscribe, just check token in console log. It has props: closed: true, _subscriptions: null, isStopped: true.
Compare if not unsubscribe:
closed: false isStopped: false _subscriptions: Array[1].
If you want the complete value, you have to complete your Subject, in that case - timer.

RXJS + Redux Observable - how to merge a new stream?

We've recently picked up Redux Observable and it's been a great way to manage high level action orchestration.
One problem I've recently is responding to the result of a data fetch. We have a generic service function which returns a RXJS observable. Normally we select what ever data we need and subscribe.
I thought this would be fairly natural with redux-observable. Use MapTo on the Epic, and return the RXJS observer with the subsequent select.
From what I can tell Redux-observable doesn't subscribe so nothing happens.
Does anyone have an example of how it should work?
export function redirectUserToEndpointEpic(action$) {
return action$.ofType(LOCATION_CHANGE)
.filter(action=>action.payload.pathname !== '/'))
.mapTo(action=>authService.getObserver() // returns a stream which has not been subscribed to
.select(userData=>userData.defaultPath)
.map(push);
}
This code is actually correct. The dependency was using 'rx' library rather than 'rxjs' which caused a conflict.
Thanks all

Observing when stream is unsubscribed

I have an RxJS observable stream that I'm sharing like the following:
var sub = Observable.create(obs => {
// logic here
return () => {
// call rest service to notify server
};
})
.publish()
.refCount();
When the last subscriber unsubscribes, I need to make a REST request. The obvious choice is to add that call into the return cleanup function - but you then have broken out of any observable sequence and any errors etc aren't easily handled.
I could just use a Subject, push a value onto it in the cleanup function, and observe it elsewhere with the REST call hanging off that.
Ideally I'd do something like concatenating to the disposed stream with my REST call (concat obviously wouldn't work as it's not completing).
Does anyone have any suggestions for the cleanest way of handling this? All the options above seem a bit clunky and I feel like I've missed something.
You could implement a finally(...) in your stream, that does the cleanup.
The finally is automatically executed when the stream finalizes (error or complete).
Note: This will not work when you unsubscribe manually and not call complete on your stream.

Resources