Related
I've got a script that copy some content from local to remote, where remote is given as an input argument.
To do so, I'm using scp and it also support local copy (meaning that the remote given as input matches the local).
I wonder if it worth the effort to change the script so that in this special case, cp will be called rather than scp. perhaps do you know if the internal implementation of scp do this for me ?
Instead of worrying about which is faster, why not implement some branching inside the script
if [ "$1" = "local" ]
then
#Use cp
else
#Use scp
fi
That said, scp should be slower than cp for the manpage says :
scp copies files between hosts on a network. It uses ssh(1) for
data transfer, and uses the same authentication and provides the
same security as ssh(1). Unlike rcp(1), scp will ask for passwords
or passphrases if they are needed for authentication.
The overhead in scp is the time taken in authenticating the host and guest before a transfer occurs.
But you can use the -o NoHostAuthenticationForLocalhost option with scp as a workaround.
scp -o NoHostAuthenticationForLocalhost target destination
should be as fast as cp
I use ssh at work and recently switched to Linux on my local work machine. As a result, I now have to fully-qualify the hostname (i.e. instead of dev1 I need to use dev1.megacorpnetworkdomain.com). This gets rather annoying for scp. I already have auto-completion set up for remote paths. What I tried to do is create a variable alias for the path:
WORK='user#dev1.megacorpnetworkdomain.com:/home/user'
The problem is now scp fails to do remote completion when I do the following:
scp $WORK/<tab>
Whereas the following performs remote completion correctly:
scp user#dev1.megacorpnetworkdomain.com:/home/user/<tab>
I tried to naively work around this by using complete:
_scp_expand_vars () {
COMPREPLY=()
local cur=${COMP_WORDS[COMP_CWORD]}
eval cur=$cur
COMPREPLY=( $cur )
return 0
}
complete -F _scp_expand_vars scp
This now correctly expands variables for scp, but breaks the original functionality of remote directory expansion. How could I achieve both? I'm assuming the original functionality is handled by _scp_remote_files function based on a bit of online research?
For one, if you regularly access hosts under megacorpnetworkdomain.com, you should put it in /etc/resolv.conf; there should be a line:
search megacorpnetworkdomain.com
Then you can use all hosts by just referencing the short hostname, i.e. dev1 in any program.
For ssh you can follow the advice of Etan Reiser, an example looks like this:
Host dev1
HostName dev1.megacorpnetworkdomain.com
User user
When you use ssh or scp they will offer you the choices defined there with tab completion as usual.
I've had a look on google and here on stack but can't find a good example on how to do this.
All I basically want to do is SSH into a server copy all the site files and paste them into a folder on my computer?
I normally use git but this is an old site which has not been setup with git so I just wanted to know a quick way to copy from the server as FTP sucks!
A simple process with commands for terminal would be great!
Check out rsync. It has the capability to operate over ssh. You might also want to look into ssh aliases (which it also honors) when copying files over, and it's what git uses to only sync the differences between two repositories.
The advantage of rsync over SCP or SFTP is that it can resume download if interrupted, takes little bandwidth to sync since it sends change sets instead of entire files (unless the file doesn't yet exist on one side), and can do one- or two-way sync depending on your preference.
ssh USER#SERVER "tar zcvf - /DUMP_DIR" | cat > /OUT_DIR/FILE_NAME_OF_ARCH
or
(rsync -avz --delete /DUMP_DIR USER#SERVER:/OUT_DIR &)
Look at SCP.
scp username#remotehost.com:/directoryname/* /some/local/directory
Use scp
scp -P 2222 json-serde-1.1.8-SNAPSHOT-jar-with-dependencies.jar root#127.0.0.1:
For Example.
Hope that helps!
I often have to login to one of several servers and go to one of several directories on those machines. Currently I do something of this sort:
localhost ~]$ ssh somehost
Welcome to somehost!
somehost ~]$ cd /some/directory/somewhere/named/Foo
somehost Foo]$
I have scripts that can determine which host and which directory I need to get into but I cannot figure out a way to do this:
localhost ~]$ go_to_dir Foo
Welcome to somehost!
somehost Foo]$
Is there an easy, clever or any way to do this?
You can do the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted ; bash --login"
This way, you will get a login shell right on the directory_wanted.
Explanation
-t Force pseudo-terminal allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services.
Multiple -t options force tty allocation, even if ssh has no local tty.
If you don't use -t then no prompt will appear.
If you don't add ; bash then the connection will get closed and return control to your local machine
If you don't add bash --login then it will not use your configs because its not a login shell
You could add
cd /some/directory/somewhere/named/Foo
to your .bashrc file (or .profile or whatever you call it) at the other host. That way, no matter what you do or where you ssh from, whenever you log onto that server, it will cd to the proper directory for you, and all you have to do is use ssh like normal.
Of curse, rogeriopvl's solution works too, but it's a tad bit more verbose, and you have to remember to do it every time (unless you make an alias) so it seems a bit less "fun".
My preferred approach is using the SSH config file (described below), but there are a few possible solutions depending on your usages.
Command Line Arguments
I think the best answer for this approach is christianbundy's reply to the accepted answer:
ssh -t example.com "cd /foo/bar; exec \$SHELL -l"
Using double quotes will allow you to use variables from your local machine, unless they are escaped (as $SHELL is here). Alternatively, you can use single quotes, and all of the variables you use will be the ones from the target machine:
ssh -t example.com 'cd /foo/bar; exec $SHELL -l'
Bash Function
You can simplify the command by wrapping it in a bash function. Let's say you just want to type this:
sshcd example.com /foo/bar
You can make this work by adding this to your ~/.bashrc:
sshcd () { ssh -t "$1" "cd \"$2\"; exec \$SHELL -l"; }
If you are using a variable that exists on the remote machine for the directory, be sure to escape it or put it in single quotes. For example, this will cd to the directory that is stored in the JBOSS_HOME variable on the remote machine:
sshcd example.com \$JBOSS_HOME
SSH Config File
If you'd like to see this behavior all the time for specific (or any) hosts with the normal ssh command without having to use extra command line arguments, you can set the RequestTTY and RemoteCommand options in your ssh config file.
For example, I'd like to type only this command:
ssh qaapps18
but want it to always behave like this command:
ssh -t qaapps18 'cd $JBOSS_HOME; exec $SHELL'
So I added this to my ~/.ssh/config file:
Host *apps*
RequestTTY yes
RemoteCommand cd $JBOSS_HOME; exec $SHELL
Now this rule applies to any host with "apps" in its hostname.
For more information, see http://man7.org/linux/man-pages/man5/ssh_config.5.html
I've created a tool to SSH and CD into a server consecutively – aptly named sshcd. For the example you've given, you'd simply use:
sshcd somehost:/some/directory/somewhere/named/Foo
Let me know if you have any questions or problems!
Based on additions to #rogeriopvl's answer, I suggest the following:
ssh -t xxx.xxx.xxx.xxx "cd /directory_wanted && bash"
Chaining commands by && will make the next command run only when the previous one was successful (as opposed to using ;, which executes commands sequentially). This is particularly useful when needing to cd to a directory performing the command.
Imagine doing the following:
/home/me$ cd /usr/share/teminal; rm -R *
The directory teminal doesn't exist, which causes you to stay in the home directory and remove all the files in there with the following command.
If you use &&:
/home/me$ cd /usr/share/teminal && rm -R *
The command will fail after not finding the directory.
In my very specific case, I just wanted to execute a command in a remote host, inside a specific directory from a Jenkins slave machine:
ssh myuser#mydomain
cd /home/myuser/somedir
./commandThatMustBeRunInside_somedir
exit
But my machine couldn't perform the ssh (it couldn't allocate a pseudo-tty I suppose) and kept me giving the following error:
Pseudo-terminal will not be allocated because stdin is not a terminal
I could get around this issue passing "cd to dir + my command" as a parameter of the ssh command (to not have to allocate a Pseudo-terminal) and by passing the option -T to explicitly tell to the ssh command that I didn't need pseudo-terminal allocation.
ssh -T myuser#mydomain "cd /home/myuser/somedir; ./commandThatMustBeRunInside_somedir"
I use the environment variable CDPATH
going one step further with the -t idea. I keep a set of scripts calling the one below to go to specific places in my frequently visited hosts. I keep them all in ~/bin and keep that directory in my path.
#!/bin/bash
# does ssh session switching to particular directory
# $1, hostname from config file
# $2, directory to move to after login
# can save this as say 'con' then
# make another script calling this one, e.g.
# con myhost repos/i2c
ssh -t $1 "cd $2; exec \$SHELL --login"
My answer may differ from what you really want, but I write here as may be useful for some people. In my solution you have to enter into the directory once and then every new ssh session goes to the same dir (after the first logout).
How to ssh to the same directory you have been in your last login.
(I assume you use bash on the remote node.)
Add this line to your ~/.bash_logout on the remote node(!):
echo $PWD > ~/.bash_lastpwd
and these lines to the ~/.bashrc file (still on the remote node!)
if [ -f ~/.bash_lastpwd ]; then
cd $(cat ~/.bash_lastpwd)
fi
This way you save your current path on every logout and .bashrc put you into that directory after login.
ps: You can tweak it further like using the SSH_CLIENT variable to decide to go into that directory or not, so you can differentiate between local logins and ssh or even between different ssh clients.
Another way of going to directly after logging in is create "Alias". When you login into your system just type that alias and you will be in that directory.
Example : Alias = myfolder '/var/www/Folder'
After you log in to your system type that alias (this works from any part of the system)
this command if not in bashrc will work for current session. So you can also add this alias to bashrc to use that in future
$ myfolder => takes you to that folder
I know this has been answered ages ago but I found the question while trying to incorporate an ssh login in a bash script and once logged in run a few commands and log back out and continue with the bash script. The simplest way I found which hasnt been mentioned elsewhere because it is so trivial is to do this.
#!/bin/bash
sshpass -p "password" ssh user#server 'cd /path/to/dir;somecommand;someothercommand;exit;'
Connect With User
In case if you don't know this, you can use this to connect by specifying both user and host
ssh -t <user>#<Host domain / IP> "cd /path/to/directory; bash --login"
Example: ssh -t admin#test.com "cd public_html; bash --login"
You can also append the commands to be executed on every login by appending it in the double quotes with a ; before each command
Unfortunately, the suggested solution (of #rogeriopvl) doesn't work when you use multiple hops, so I found another one.
On remote machine add into ~/.bashrc the following:
[ "x$CDTO" != "x" ] && cd $CDTO
This allows you to specify the desired target directory on command line in this way:
ssh -t host1 ssh -t host2 "CDTO=/desired_directory exec bash --login"
Sure, this way can be used for a single hop too.
This solution can be combined with the usefull tip of #redseven for greater flexibilty (if no $CDTO, go to saved directory, if exists).
SSH itself provides a means of communication, it does not know anything about directories. Since you can specify which remote command to execute (this is - by default - your shell), I'd start there.
simply modify your home with the command:
usermod -d /newhome username
I've searched around a bit for similar questions, but other than running one command or perhaps a few command with items such as:
ssh user#host -t sudo su -
However, what if I essentially need to run a script on (let's say) 15 servers at once. Is this doable in bash? In a perfect world I need to avoid installing applications if at all possible to pull this off. For argument's sake, let's just say that I need to do the following across 10 hosts:
Deploy a new Tomcat container
Deploy an application in the container, and configure it
Configure an Apache vhost
Reload Apache
I have a script that does all of that, but it relies on me logging into all the servers, pulling a script down from a repo, and then running it. If this isn't doable in bash, what alternatives do you suggest? Do I need a bigger hammer, such as Perl (Python might be preferred since I can guarantee Python is on all boxes in a RHEL environment thanks to yum/up2date)? If anyone can point to me to any useful information it'd be greatly appreciated, especially if it's doable in bash. I'll settle for Perl or Python, but I just don't know those as well (working on that). Thanks!
You can run a local script as shown by che and Yang, and/or you can use a Here document:
ssh root#server /bin/sh <<\EOF
wget http://server/warfile # Could use NFS here
cp app.war /location
command 1
command 2
/etc/init.d/httpd restart
EOF
Often, I'll just use the original Tcl version of Expect. You only need to have that on the local machine. If I'm inside a program using Perl, I do this with Net::SSH::Expect. Other languages have similar "expect" tools.
The issue of how to run commands on many servers at once came up on a Perl mailing list the other day and I'll give the same recommendation I gave there, which is to use gsh:
http://outflux.net/unix/software/gsh
gsh is similar to the "for box in box1_name box2_name box3_name" solution already given but I find gsh to be more convenient. You set up a /etc/ghosts file containing your servers in groups such as web, db, RHEL4, x86_64, or whatever (man ghosts) then you use that group when you call gsh.
[pdurbin#beamish ~]$ gsh web "cat /etc/redhat-release; uname -r"
www-2.foo.com: Red Hat Enterprise Linux AS release 4 (Nahant Update 7)
www-2.foo.com: 2.6.9-78.0.1.ELsmp
www-3.foo.com: Red Hat Enterprise Linux AS release 4 (Nahant Update 7)
www-3.foo.com: 2.6.9-78.0.1.ELsmp
www-4.foo.com: Red Hat Enterprise Linux Server release 5.2 (Tikanga)
www-4.foo.com: 2.6.18-92.1.13.el5
www-5.foo.com: Red Hat Enterprise Linux Server release 5.2 (Tikanga)
www-5.foo.com: 2.6.18-92.1.13.el5
[pdurbin#beamish ~]$
You can also combine or split ghost groups, using web+db or web-RHEL4, for example.
I'll also mention that while I have never used shmux, its website contains a list of software (including gsh) that lets you run commands on many servers at once. Capistrano has already been mentioned and (from what I understand) could be on that list as well.
Take a look at Expect (man expect)
I've accomplished similar tasks in the past using Expect.
You can pipe the local script to the remote server and execute it with one command:
ssh -t user#host 'sh' < path_to_script
This can be further automated by using public key authentication and wrapping with scripts to perform parallel execution.
You can try paramiko. It's a pure-python ssh client. You can program your ssh sessions. Nothing to install on remote machines.
See this great article on how to use it.
To give you the structure, without actual code.
Use scp to copy your install/setup script to the target box.
Use ssh to invoke your script on the remote box.
pssh may be interesting since, unlike most solutions mentioned here, the commands are run in parallel.
(For my own use, I wrote a simpler small script very similar to GavinCattell's one, it is documented here - in french).
Have you looked at things like Puppet or Cfengine. They can do what you want and probably much more.
For those that stumble across this question, I'll include an answer that uses Fabric, which solves exactly the problem described above: Running arbitrary commands on multiple hosts over ssh.
Once fabric is installed, you'd create a fabfile.py, and implement tasks that can be run on your remote hosts. For example, a task to Reload Apache might look like this:
from fabric.api import env, run
env.hosts = ['host1#example.com', 'host2#example.com']
def reload():
""" Reload Apache """
run("sudo /etc/init.d/apache2 reload")
Then, on your local machine, run fab reload and the sudo /etc/init.d/apache2 reload command would get run on all the hosts specified in env.hosts.
You can do it the same way you did before, just script it instead of doing it manually. The following code remotes to machine named 'loca' and runs two commands there. What you need to do is simply insert commands you want to run there.
che#ovecka ~ $ ssh loca 'uname -a; echo something_else'
Linux loca 2.6.25.9 #1 (blahblahblah)
something_else
Then, to iterate through all the machines, do something like:
for box in box1_name box2_name box3_name
do
ssh $box 'commmands_to_run_everywhere'
done
In order to make this ssh thing work without entering passwords all the time, you'll need to set up key authentication. You can read about it at IBM developerworks.
You can run the same command on several servers at once with a tool like cluster ssh. The link is to a discussion of cluster ssh on the Debian package of the day blog.
Well, for step 1 and 2 isn't there a tomcat manager web interface; you could script that with curl or zsh with the libwww plug in.
For SSH you're looking to:
1) not get prompted for a password (use keys)
2) pass the command(s) on SSH's commandline, this is similar to rsh in a trusted network.
Other posts have shown you what to do, and I'd probably use sh too but I'd be tempted to use perl like ssh tomcatuser#server perl -e 'do-everything-on-one-line;' or you could do this:
either scp the_package.tbz tomcatuser#server:the_place/.
ssh tomcatuser#server /bin/sh <<\EOF
define stuff like TOMCAT_WEBAPPS=/usr/local/share/tomcat/webapps
tar xj the_package.tbz or rsync rsync://repository/the_package_place
mv $TOMCAT_WEBAPPS/old_war $TOMCAT_WEBAPPS/old_war.old
mv $THE_PLACE/new_war $TOMCAT_WEBAPPS/new_war
touch $TOMCAT_WEBAPPS/new_war [you don't normally have to restart tomcat]
mv $THE_PLACE/vhost_file $APACHE_VHOST_DIR/vhost_file
$APACHECTL restart [might need to login as apache user to move that file and restart]
EOF
You want DSH or distributed shell, which is used in clusters a lot. Here is the link: dsh
You basically have node groups (a file with lists of nodes in them) and you specify which node group you wish to run commands on then you would use dsh, like you would ssh to run commands on them.
dsh -a /path/to/some/command/or/script
It will run the command on all the machines at the same time and return the output prefixed with the hostname. The command or script has to be present on the system, so a shared NFS directory can be useful for these sorts of things.
Creates hostname ssh command of all machines accessed.
by Quierati
http://pastebin.com/pddEQWq2
#Use in .bashrc
#Use "HashKnownHosts no" in ~/.ssh/config or /etc/ssh/ssh_config
# If known_hosts is encrypted and delete known_hosts
[ ! -d ~/bin ] && mkdir ~/bin
for host in `cut -d, -f1 ~/.ssh/known_hosts|cut -f1 -d " "`;
do
[ ! -s ~/bin/$host ] && echo ssh $host '$*' > ~/bin/$host
done
[ -d ~/bin ] && chmod -R 700 ~/bin
export PATH=$PATH:~/bin
Ex Execute:
$for i in hostname{1..10}; do $i who;done
There is a tool called FLATT (FLexible Automation and Troubleshooting Tool) that allows you to execute scripts on multiple Unix/Linux hosts with a click of a button. It is a desktop GUI app that runs on Mac and Windows but there is also a command line java client.
You can create batch jobs and reuse on multiple hosts.
Requires Java 1.6 or higher.
Although it's a complex topic, I can highly recommend Capistrano.
I'm not sure if this method will work for everything that you want, but you can try something like this:
$ cat your_script.sh | ssh your_host bash
Which will run the script (which resides locally) on the remote server.
Just read a new blog using setsid without any further installation/configuration besides the mainstream kernel. Tested/Verified under Ubuntu14.04.
While the author has a very clear explanation and sample code as well, here's the magic part for a quick glance:
#----------------------------------------------------------------------
# Create a temp script to echo the SSH password, used by SSH_ASKPASS
#----------------------------------------------------------------------
SSH_ASKPASS_SCRIPT=/tmp/ssh-askpass-script
cat > ${SSH_ASKPASS_SCRIPT} <<EOL
#!/bin/bash
echo "${PASS}"
EOL
chmod u+x ${SSH_ASKPASS_SCRIPT}
# Tell SSH to read in the output of the provided script as the password.
# We still have to use setsid to eliminate access to a terminal and thus avoid
# it ignoring this and asking for a password.
export SSH_ASKPASS=${SSH_ASKPASS_SCRIPT}
......
......
# Log in to the remote server and run the above command.
# The use of setsid is a part of the machinations to stop ssh
# prompting for a password.
setsid ssh ${SSH_OPTIONS} ${USER}#${SERVER} "ls -rlt"
Easiest way I found without installing or configuring much software is using plain old tmux. Say you have 9 linux servers. Pick a box as your main. Start a tmux session:
tmux
Then create 9 split tmux panes by doing this 8 times:
ctrl-b + %
Now SSH into each box in each pane. You'll need to know some tmux shortcuts. To navigate, press:
ctrl+b <arrow-keys>
Once your logged in to all your boxes on each pane. Now turn on pane synchronization where it lets you type the same thing into each box:
ctrl+b :setw synchronize-panes on
now when you press any keys, it will show up on every pane. to turn it off, just make on to off. to cycle resize panes, press ctrl+b < space-bar >.
This works alot better for me since I need to see each terminal output as sometimes servers crash or hang for whatever reason when downloading or upgrade software. Any issues, you can just isolate and resolve individually.