I have a realy strange problem.
I'm using Oracle 11g.
There is a query executed by Business Objects tool, which the optimizer generate different plans for different users.
When my customer run the BO report it's realy slowly, but when I run it, it's fast.
According to the fact that there is a great plan (take seconds), I tried to enforced the optimizer to use that plan.
The problem is that it's not work.
I tried with baseline and sqlsets but the query used bind variables with different values each time, so it not realy help when the query change.
Is there a way to disable a plan for all sql executions?
This is 1 bad plan.. but can come with a lot of queries becasue of the bind variables.
More, I found in the net information about optimizer_secure_view_merging
parameter that could cause such problem.. but I have few users that got the good plan , not only the owner.. Is that still can be that ?
source:
https://oracledb.wordpress.com/2007/04/10/execution-plans-differents-with-different-users/
If there is another idea what to do..
I'd not call this problem a realy strange.
There is a lot of possible causes that diferent user get different behaviour for the same query.
On trivial cause is to query a non-qualified table.
select * from TAB
This query will access different tables for different users.
The next possibility are different Optimizer Initiation Parameters that could cause that the optimizer for one user may use features that are prohibited for other user.
I'd recommend as a simplest way for troubelshooting to perform the Oracle 10053 trace for both queries.
The trace file contains the complete list of the used paramaters and a simple diff could provide a usefull hint.
If the parameters are not the cause, you'll see in the trace the details why different access paths in the execution plan was taken. (A good introduction to understand 10053 trace is the paper of Wolfgang Breitling I linked above).
Related
i'm struggeling with Performance in oracle. Situation is: Subsystem B has a dblink to master DB A. on System B a query completes after 15 seconds over dblink, db plan uses appropriate indexes.
If same query should fill a table in a stored procedure now, Oracle uses another plan with full scans. whatever i try (hints), i can't get rid of these full scans. that's horrible.
What can i do?
The Oracle Query Optimizer tries 2000 different possibilities and chooses the best one in normal situations. But if you think it choose wrong plan, You may suspect the following cases:
1- Your histograms which belongs to querying tables are deprecated.
2- Your indexes can not be used because of your faulty query.
3- You can use index hints to force the indexes to be used.
4- You can use SQL Advisor or run TKProf for performance analysis and decide what's wrong or what caused bad performance. Check network, Disk I/O values etc.
If you share your query we can give you more information.
Look like we are not taking same queries in two different conditions.
First case is Simple select over dblink & Second case is "insert as select over dblink".
can you please share two queries & execution plans here as You may have them handy. If its not possible to past queries due to security limitations, please past execution plans.
-Abhi
after many tries, I could create a new DB Plan with Enterprise Manager. now it's running perfect.
I have an Oracle bind query that is extremely slow (about 2 minutes) when it executes in my C# program but runs very quickly in SQL Developer. It has two parameters that hit the tables index:
select t.Field1, t.Field2
from theTable t
where t.key1=:key1
and t.key2=:key2
Also, if I remove the bind variables and create dynamic sql, it runs just like it does in SQL Developer.
Any suggestion?
BTW, I'm using ODP.
If you are replacing the bind variables with static varibles in sql developer, then you're not really running the same test. Make sure you use the bind varibles, and if it's also slow you're just getting bit by a bad cached execution plan. Updating the stats on that table should resolve it.
However if you are actually using bind variables in sql developers then keep reading. The TLDR version is that parameters that ODP.net run under sometimes cause a slightly more pessimistic approach. Start with updating the stats, but have your dba capture the execution plan under both scenarios and compare to confirm.
I'm reposting my answer from here: https://stackoverflow.com/a/14712992/852208
I considered flagging yours as a duplicate but your title is a little more concise since it identifies the query does run fast in sql developer. I'll welcome advice on handling in another manner.
Adding the following to your config will send odp.net tracing info to a log file:
This will probably only be helpful if you can find a large gap in time. Chances are rows are actually coming in, just at a slower pace.
Try adding "enlist=false" to your connection string. I don't consider this a solution since it effecitively disables distributed transactions but it should help you isolate the issue. You can get a little bit more information from an oracle forumns post:
From an ODP perspective, all we can really point out is that the
behavior occurs when OCI_ATR_EXTERNAL_NAME and OCI_ATR_INTERNAL_NAME
are set on the underlying OCI connection (which is what happens when
distrib tx support is enabled).
I'd guess what you're not seeing is that the execution plan is actually different (meaning the actual performance hit is actually occuring on the server) between the odp.net call and the sql developer call. Have your dba trace the connection and obtain execution plans from both the odp.net call and the call straight from SQL Developer (or with the enlist=false parameter).
If you confirm different execution plans or if you want to take a preemptive shot in the dark, update the statistics on the related tables. In my case this corrected the issue, indicating that execution plan generation doesn't really follow different rules for the different types of connections but that the cost analysis is just slighly more pesimistic when a distributed transaction might be involved. Query hints to force an execution plan are also an option but only as a last resort.
Finally, it could be a network issue. If your odp.net install is using a fresh oracle home (which I would expect unless you did some post-install configuring) then the tnsnames.ora could be different. Host names in tnsnams might not be fully qualified, creating more delays resolving the server. I'd only expect the first attempt (and not subsequent attempts) to be slow in this case so I don't think it's the issue but I thought it should be mentioned.
Are the parameters bound to the correct data type in C#? Are the columns key1 and key2 numbers, but the parameters :key1 and :key2 are strings? If so, the query may return the correct results but will require implicit conversion. That implicit conversion is like using a function to_char(key1), which prevents an index from being used.
Please also check what is the number of rows returned by the query. If the number is big then possibly C# is fetching all rows and the other tool first pocket only. Fetching all rows may require many more disk reads in that case, which is slower. To check this try to run in SQL Developer:
SELECT COUNT(*) FROM (
select t.Field1, t.Field2
from theTable t
where t.key1=:key1
and t.key2=:key2
)
The above query should fetch the maximum number of database blocks.
Nice tool in such cases is tkprof utility which shows SQL execution plan which may be different in cases above (however it should not be).
It is also possible that you have accidentally connected to different databases. In such cases it is nice to compare results of queries.
Since you are raising "Bind is slow" I assume you have checked the SQL without binds and it was fast. In 99% using binds makes things better. Please check if query with constants will run fast. If yes than problem may be implicit conversion of key1 or key2 column (ex. t.key1 is a number and :key1 is a string).
I have a vey huge query. It is rather large, so i will not post it here(it has 6 levels of nested queries with ordering and grouping). Query has 2 parameters that are passed to it via PreparedStatement.setString(index, value). When I execute my query through SQL Developer(replacing query parameters to actual values before it by hand) the query runs about 10 seconds and return approximately 15000 rows. But when I try to run it through java program using PreparedStament with varibales it fails with ORA-01652(unable to extend temp segment). I have tried to use simple Statement from java program - it works fine. Also when I use preparedStatement without variables(don't use setString(), but specify parameters by hand) it works fine too.
So, I suspect that problem is in PreparedStatemnt parameters.
How does the mechanism of that parameters work? Why simple statement works fine but prepared one fails?
You're probably running into issues with bind variable peeking.
For the same query, the best plan can be significantly different depending on the actual bind variables. In 10g, Oracle builds the execution plan based on the first set of bind variables used. 11g mostly fixed this problem with adaptive cursor sharing, a feature that creates multiple plans for different bind variables.
Here are some ideas for solving this problem:
Use literals This isn't always as bad as people assume. If the good version of your query runs in 10 seconds, the overhead of hard-parsing the query will be negligible. But you may need to be careful to avoid SQL injection.
Force a hard-parse There are a few ways to force Oracle to hard-parse every query. One method is to call DBMS_STATS with NO_INVALIDATE=>FALSE on one of the tables in the query.
Disable bind-variable peeking / hints You can do this by removing the relevant histograms, or using one of the parameters in the link provided by OldProgrammer. This will stabilize your plan, but will not necessarily pick the correct plan. You may also need to use hints to pick the right plan. But then you may not have the right plan for every combination of inputs.
Upgrade to 11g This may not be an option, but this issue is another good reason to start planning an upgrade.
I'm working on a very large query, in a inherited application. This is a large insert-query, that takes 4 tables with well over a million records. I know, I would also rather have this in SQL-server, but there is no infrastructure at this customer to do this :-)
This query has worked for over a year. However, the source-tables keep on growing, and last week it threw the dreaded 'out of system resources'-error. Bummer...!
I think it is possible to optimize this query. Working in MySQL, I would use the explain-command, to see where optimalisation might occur. Is there a equivalent of this in Access? I cannot seem to find it....
kind regards,
Paul
Probably Jet ShowPlan is closest to what you want. You will have to set a registry key. Then query plan information gets dumped to a text file named SHOWPLAN.OUT. You can read about the details in this article on TechRepublic: Use Microsoft Jet's ShowPlan to write more efficient queries
Also try the Performance Analyzer wizard. You can ask it to examine your query alone, or also ask it to examine table or other queries used by that query.
If you haven't compacted the database recently, see whether that improves performance. Compacting also updates index statistics which allows the engine to make better decisions for the query plan.
I have created sql tuning task for some query and executed it.After generating report,It recommends me to run the following command:
execute dbms_sqltune.accept_sql_profile(task_name => 'tuning_task_name',
replace => TRUE);
But! Of course I want to know what does this profile do?! and after searching this question on the internet I found the following query:
select
rat.attr1
from
sys.WRI$_ADV_TASKS tsk,
sys.WRI$_ADV_RATIONALE rat
where
tsk.name = 'tuning_task_name'
and rat.task_id = tsk.id
And the result of this query is the following:
I don't understand what does it do :( And also I want to convert this profile hints into the more readable (/+ hint/) sql hints?
Yes, you saw those outline hints.
They will be forced to be used when oracle optimizer parsing this SQL. Hence, the generated execution plan is affected by those hints.
If you want to use similar hints in you SQL, you just need simply copy them into you SQL where follows SELECT, commented by /+/. Be aware the Query Block names, they will be changed in different SQL.
Here is a full list of Oracle SQL hints for your reference.
http://www.hellodba.com/reader.php?ID=208&lang=EN
http://www.hellodba.com/reader.php?ID=220&lang=EN
Hope this helps
Based on page 24 of this PDF it looks like these hints are mostly telling the optimizer to adjust the cardinality estimates for different objects. WHY the profiler is doing this I'm not sure; maybe the statistics are bad or maybe it's making fake statistics to force a better plan? But perhaps a better way to understand the profile is to compare the explain plan before and after.