I'm trying to unblur my image slowly, i blurred it with this code
let blur = UIBlurEffect(style: UIBlurEffectStyle.light)
let blurView = UIVisualEffectView(effect: blur)
blurView.frame = imageview.bounds
imageview.addSubview(blurView)
then i tried to unblur my image with this code :
UIView.animate(withDuration: 6.0) {
blurView.alpha = 0.5
}
The problem is that there is no effect going on, the image is loading with 0.5 alpha.
The problem was that my unblur effect was in the viewDidLoad Method, i had to put it in the viewDidApper Method.
Related
I have an imageviewer with a couple images, When i zoom in the first image and wanna see the right side of the image. The folowing image is overlapping the inzooming image. This is very annoying. Is there a way how i can set the zoom in image on the front.
How can i set the zoomed image always on front.
See picture https://i.stack.imgur.com/5f5JZ.jpg
My imageviewer is in a container
Image red ;
red = EncodedImage.create("/HW_Delfzijl_Waddenzee_Oost.jpg");
Image blue = Image.createImage(500, 500, 0xff0000ff);
Image red2 = Image.createImage(500, 500, 0xffff0000);
Image List1[]= new Image [3];
List1[0] = red;
List1[1] = blue;
List1[2] = red2;
iv = new ImageViewer();
iv.setWidth(500);
iv.setHeight(500);
iv.setImageList(new DefaultListModel<>(List1));
Container1 = BoxLayout.encloseY( Kaarten.AuvHW, AdvSpr,iv,
Up,progressbar);
I was able to reproduce this with the following code:
Form hi = new Form("ImageViewer", BoxLayout.y());
Image red = Image.createImage(2000, 800, 0xffff0000);
Image blue = Image.createImage(2000, 500, 0xff0000ff);
ImageViewer viewer = new ImageViewer();
viewer.setImageList(new DefaultListModel<>(red, blue));
hi.add(BoxLayout.encloseY(viewer, new Label("Dummy")));
hi.show();
The problem only happens if I stand on the blue image (the second one) scale it up and then try to move. It doesn't happen when moving from the red image to the blue.
I believe this is due to this method in the ImagaViewer code. Since background isn't painted the old image isn't cleaned up. We need to add a condition that disables that while dragging. I think changing the code in that method to this will fix the problem but it's a bit risky and might trigger flickering:
protected void paintBackground(Graphics g) {
// disable background painting for performance when zooming
if(imageDrawWidth < getWidth() || imageDrawHeight < getHeight() || panPositionX != 0) {
super.paintBackground(g);
}
}
I would suggest filing an issue so we can consider the options here as this isn't trivial. One partial workaround is to use:
viewer.setImageInitialPosition(ImageViewer.IMAGE_FILL);
Which minimizes the impact of the issue.
I'm trying to programmatically resize macOS windows. Similar to Rectangle.
I have the basic resizing code working, for example, move the window to the right half, and when there is only one screen it works fine, however when I try to resize with two screens (in a vertical layout) the math does not work:
public func moveRight() {
guard let frontmostWindowElement = AccessibilityElement.frontmostWindow()
else {
NSSound.beep()
return
}
let screens = screenDetector.detectScreens(using: frontmostWindowElement)
guard let usableScreens = screens else {
NSSound.beep()
print("Unable to obtain usable screens")
return
}
let screenFrame = usableScreens.currentScreen.adjustedVisibleFrame
print("Visible frame of current screen \(usableScreens.visibleFrameOfCurrentScreen)")
let halfPosition = CGPoint(x: screenFrame.origin.x + screenFrame.width / 2, y: -screenFrame.origin.y)
let halfSize = CGSize(width: screenFrame.width / 2, height: screenFrame.height)
frontmostWindowElement.set(size: halfSize)
frontmostWindowElement.set(position: halfPosition)
frontmostWindowElement.set(size: halfSize)
print("movedWindowRect \(frontmostWindowElement.rectOfElement())")
}
If my window is on the main screen then the resizing works correctly, however if it is a screen below (#3 in the diagram below) then the Y coordinate ends up in the top monitor (#2 or #1 depending on x coordinate) instead of the original one.
The output of the code:
Visible frame of current screen (679.0, -800.0, 1280.0, 775.0)
Raw Frame (679.0, -800.0, 1280.0, 800.0)
movedWindowRect (1319.0, 25.0, 640.0, 775.0)
As far as I can see the problem lies in how Screens and windows are positioned:
I'm trying to understand how should I position the window so that it remains in the correct screen (#3), but having no luck so far, there doesn't seem to be any method to get the absolute screen dimensions to place the screen in the correct origin.
Any idea how can this be solved?
I figured it out, I completely missed one of the functions used in the AccessibilityElement class:
static func normalizeCoordinatesOf(_ rect: CGRect) -> CGRect {
var normalizedRect = rect
let frameOfScreenWithMenuBar = NSScreen.screens[0].frame as CGRect
normalizedRect.origin.y = frameOfScreenWithMenuBar.height - rect.maxY
return normalizedRect
}
Basically, since everything is calculated based on the main screen then there is no other option than to take the coordinates of that one and then offset to get the real position of the screen element.
I'm developing a magnifying glass like application for mac. My goal is to be able to pinpoint individual pixels when zoomed in. I'm using this code in mouseMoved(with event: NSEvent):
let captureSize = self.frame.size.width / 9 //9 is the scale factor
let screenFrame = (NSScreen.main()?.frame)!
let x = floor(point.x) - floor(captureSize / 2)
let y = screenFrame.size.height - floor(point.y) - floor(captureSize / 2)
let windowID = CGWindowID(self.windowNumber)
cgImageExample = CGWindowListCreateImage(CGRect(x: x, y: y, width: captureSize,
height: captureSize), CGWindowListOption.optionOnScreenBelowWindow, windowID,
CGWindowImageOption.bestResolution)
The creation of the cgImage takes place in the CGWindowListCreateImage method. When I later draw this in an NSView, the result looks like this:
It looks blurred / like some anti-aliasing was applied during the creation of the cgImage. My goal is to get a razor sharp representation of each pixel. Can anyone point me in the right direction?
Ok, I figured it out. It was a matter of setting the interpolation quality to none on the drawing context:
context.interpolationQuality = .none
Result:
On request some more code:
//get the context
guard let context = NSGraphicsContext.current()?.cgContext else { return }
//get the CGImage
let image: CGImage = //pass the result from CGWindowListCreateImage call
//draw
context.draw(image, in: (CGRect of choice))
I am trying to render 3D bar chart in SCNView using ScreenKit framework.
My rendering code is,
int height=10,y=0,x=0;
for (int i=0; i<10; i++) {
SCNBox *box1 = [SCNBox boxWithWidth:4 height:height length:2 chamferRadius:0];
boxNode1 = [SCNNode nodeWithGeometry:box1];
boxNode1.position = SCNVector3Make(x, y, 0);
SCNMaterial *material = [SCNMaterial material];
material.diffuse.contents = (NSColor *)[self.colorArray objectAtIndex:i%6];
material.specular.contents = [NSColor whiteColor];
material.shininess = 1.0;
box1.materials = #[material];
//boxNode1.transform = rot;
[scene.rootNode addChildNode:boxNode1];
x+=6;
height+=10;
y += 5 ;
}
I can render but while re-sizing the view the chart bars goes to the center of the view.
I need to render the chart, which cover the margins of the view and when Re-size it have to change accordingly. The image(s) below shows my problem.
Original Image:
Image where less stretching of both windows:
Can anyone please help me to fix the issue.
The the windows in the image that you had linked to in your original question was very stretched and that made it very hard to see what was going on. When I took that image and made the windows less stretched it was easier to have some idea of what is going on.
I think that you are seeing a general resizing issue. Either you are using springs and struts and have configured flexible margins on the left and right or you are using auto layout with a centered view with fixed width.
I assume that the red boxes that I have drawn in the image below is the bounds of your scene view in both these cases. You can easily see if this is the case by giving the scene view a different background color and resize it again.
My solution to your problem would be to change how your view resizes as the window resizes, to better meet your expectations.
var bd:BitmapData=new BitmapData(file.width,file.height);
bd.setPixels(new Rectangle(0,0,file.width,file.height),file.raw);
var scale_x_percents:Number = (w / bd.width);
var scale_y_percents:Number = (h / bd.height);
if(!stretch) {
if(bd.width*scale_y_percents>=w) {
scale_x_percents=scale_y_percents;
}
else if(bd.height*scale_x_percents>=h) {
scale_y_percents=scale_x_percents;
}
}
var matrix:Matrix = new Matrix();
matrix.scale(scale_x_percents,scale_y_percents);
var resizedBd:BitmapData = new BitmapData(Math.floor(bd.width*scale_x_percents), Math.floor(bd.height*scale_y_percents), true, 0x000000);
resizedBd.draw(bd, matrix, null, null, null, true); // true is smoothing option, it will blur sharpened pixels
Having problem with images resizing. Looks like smoothing is not working or something is missing in the code. Maybe Matrix should have something more?
Original image:
http://imageshack.us/a/img28/4784/dc7f2ec4b0f3323cdc4e01e.jpg
and it's result:
http://imageshack.us/a/img855/4784/dc7f2ec4b0f3323cdc4e01e.jpg
I can link a bunch of others images. Some strange pixel disposition exist.
Can it be fixed somehow?
I have tested jpeg quality 100% and stage.quality='best', but none of them give the required quality outcome.
It seems that your problem is "nearest" sampling mode when drawing a BitmapData over a BitmapData. Perhaps the following might help:
var sh:Shape=new Shape();
sh.graphics.beginBitmapFill(bd,matrix,false,true);
sh.graphics.lineStyle(0,0,0); // no lines border this shape
sh.graphics.drawRect(0,0,resizedBD.width,resizedBD.height);
sh.graphics.endFill();
resizedBD.draw(sh); // or with smoothing on
Using Flash's native graphics renderer will most likely perform at least a bilinear interpolation on a drawn bitmap, which seemingly is your desired result. Also, stage.quality applies if that shape is added to stage (BTW, you can use the shape to display an uploaded pic, then draw over a BitmapData in order to save.) But, this might not work - I can't test this right now.