Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 1 year ago.
Improve this question
I created a food ordering system using Laravel. Now I want to send confirmation SMS automatically to the customer when their order received I am creating this project as my university project, not for commercial use so are there any free services that can I use?
These types of services almost always have a cost. They have been created via someone's time and efforts, and they charge for this.
That being said, there are some VERY cheap options out there. Here are probably the top 2:
Twilio
Plivo
They both have great APIs and run at less than an American penny.
For example, to send a text using Plivo:
$response = $client->messages->create(
'14153336666',
'14156667777',
'Test Message'
);
There are no free services but very very cheap services available for SMS. These cheap services are usually locale to a country.
Like Nigeria has BulkSmsNigeria, etc. Suggest you to google for "send sms services" and you'll find many.
Now using them in Laravel is a cakewalk with the Laravel SMS API Plugin. It integrates with the Laravel notification system as well. Go through the plugin documentation for an easy understanding.
You can use SMSFactor's API alongside with their Laravel Package to easily send SMS. You just need to create an account that comes with 10 free SMS so you can try it out. Then sending an SMS would look like this:
Message::send([
'to' => '33600000000',
'text' => 'Did you ever dance whith the devil in the pale moonlight ?'
]);
print_r($response->getJson());
For sending text message , there are several laravel packages available , i basically do use VONAGE package for sending text message .
register on vonage's official site
add test number
create your route
set up your controller according to your requirement as shown below .
For better understanding you can also read the full article sending text message from laravel
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 2 years ago.
This post was edited and submitted for review 1 year ago and failed to reopen the post:
Original close reason(s) were not resolved
Improve this question
I'm creating a system where I want to generate Google Meet meeting from NodeJS code. Is there API for creating a new meeting in Google Meet ? There is button Create new meeting on https://meet.google.com/ and I want to do something similar using API
I know that it is possible to create meeting using Google Calendar API but I'm looking for direct API for Google Meet without creating calendar event.
[EDIT]
It does not solve my problem, but maybe would help someone else. There is also option to generate meeting using https://meet.google.com/lookup/[custom-meeting-name] but you need to have Google Workspace (former GSuite)
It is now possible to create a new meet by going to this url: http://meet.google.com/new
That being said, it's not immediately obvious how you could get the link for the generated meet.
Try http://g.co/meet/yourmeetingname. This redirects to the same meeting URL if they're on the same Google Apps account.
Found this at https://gsuiteupdates.googleblog.com/2020/03/hangouts-meet-edu-updates.html
There is currently no direct API for Google Meet
This is a bit of a hack, but you can create a new meeting using the Google Calendar API.
API Documentation: https://developers.google.com/calendar/v3/reference/events?hl=en_US
Google blog post (when Meet was Hangouts Meet): https://cloud.google.com/blog/products/application-development/hangouts-meet-now-available-in-google
In the request you can configure the conference details (i.e. Google Meet settings) and retrieve a meeting ID.
The only caveat, which is a big one, is the new Google Meet will be tied to the calendar that the API is authenticated against. Depending on who you want the meeting to be available to you'll probably have to play around with the permissions some.
Vote on the feature request
There is a feature request for a Google Meet API here:
https://issuetracker.google.com/157261118
It specifically is asking for a way to get participant information of meetings in real-time. Though it is the closest thing to a Meet API that I have seen on the Issue Tracker.
Go and give it a ☆ if you want! That way Google knows its something that people are interested, at the moment it only has one.
Please don't comment with "+1" ... just click the star icon
there is no direct api for google meet for now, but through the help of the google calendar api I have created a npm package that can be used to create meeting directly it gives you the google meeting links instantly.
https://www.npmjs.com/package/google-meet-api
add
"conferenceData": {
"createRequest": {
"requestId": "7qxalsvy0e"
}
},
inside your events while creating an event using google calendar API v3
a google meet link will automatically be created
For your specific purpose of creating a Google Meet meeting with an API call without using the Google Calendar API I am afraid there is no other Google API service to achieve this at the moment of this answer.
Yes. It's part of the Google Calendar API and you can find it here:
https://developers.google.com/calendar/create-events#conferencing
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
I have been doing a work in outsystems platform.
My works is a recruitment application where you add candidates to your app with a curriculum. You then choose the best ones to schedule an interview with, and eventually you can hire them to your company. Well, I don't known if you guys really need to know what my app is about, or what it does but I can explain better or eventually show it if it helps with my problem.
Well what I want is:
- When I register a candidate, I add a name, an email address, and a phone number. With this email, Outsystems offers a widget that can find all networks referred to that person (by email), that widget (I am not sure if this is the correct name for this tool, maybe API is more correct) can be found in Logic and inside the folder called Dependencies, that widget is called FullContact. To use that API you must create a new action. I did it and I filled the mandatory parameters called Email with Candidate Email. I am not sure what to put in APIKey parameter, I tried a lot of things and when I publish and test it I always have the same error called 403 Forbidden. What I am doing wrong?
I am not sure if this question is supposed to be done here, if it is not just tell me and I can delete the question and search somewhere else.
what I have is this: app print
I am not sure what to put in APIkey, I saw an example and the person that did it added an assign and an ajax refresh. Do I need it to? And this is the error I get when I test the app enter link description here
I never worked with FullContact before but from some researches I learned the following:
Overview: The FullContact Developer APIs are used to manage and enhance contact information.
Authentication: All requests to all endpoints require you to specify your unique API key. The API Key is assigned to you by FullContact and is used to identify and authorize each request. Your API key should be kept private, and should never be displayed publicly.
To signup and get your free trial: https://portal.fullcontact.com/signup
Note: FullContact isn't free, you can only apply for a trial or pay.
Pricing: https://www.fullcontact.com/developer/pricing/
Where did you get that action from? Was it from the LinkedIn Connector perhaps? If so, you might be lacking authentication. Check the documentation from available in the sample eSpace.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 4 years ago.
Improve this question
I am new in Laravel. I have to use Bitcoin for checkout page. Can anybody help me how to integrate Bitcoin in laravel framework.
The Blocktrail PHP SDK works with Laravel, in fact there's an example project to get you started: Simple Block Explorer
Their API supports payments and webhooks as well as plain blockchain data, check out their API documentation: https://www.blocktrail.com/api/docs
Update 1
I've added an additional example project - a personal wallet for receiving and making payments (with an integrated block explorer). The project demonstrates the payment api as well as the webhooks api.
See it here: Simple Bitcoin Wallet App
As far as I am aware, there is no library setup for Bitcoin payment processing in Laravel, however the API for Coinbase (https://www.coinbase.com/docs/api/overview) is pretty decent, and shouldn't be too hard to implement yourself.
<form action="/create_payment" method="POST">
<script
src="https://checkout.stripe.com/checkout.js" class="stripe-button"
data-key=pk_test_6pRNASCoBOKtIshFeQd4XMUh
data-image="/square-image.png"
data-name="Demo Site"
data-description="2 widgets ($20.00)"
data-amount="2000"
data-currency="usd"
data-bitcoin="true">
</script>
</form>
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
We don’t allow questions seeking recommendations for books, tools, software libraries, and more. You can edit the question so it can be answered with facts and citations.
Closed 5 years ago.
Improve this question
I would like to know if there is already a Google+ API available to the developers. I have not yet found something?
The API is now here available: https://developers.google.com/+/
https://services.google.com/fb/forms/plusdevelopers/ This is the link to sign up for Google+ API access.
The official Google+ API can be found at: http://developers.google.com/+/api/
There is an unofficial API, PHP.GooglePlusAPI, that you can use this to fetch public data. It's something to play around with while we're waiting for the full official API from Google:
Update:
I've just added support for feed posts as well. You can use this library in your server-side code to read a public profile, post, and relationship data, cache it in a MySQL database, and serve the data to a front-end as a JSON or JSONP service.
Google just announced the developer's page
https://developers.google.com/+/
Check out the following - both work pretty well:
https://github.com/jmstriegel/php.googleplusapi
http://code.google.com/p/javaplus/
I think that you'll find this article a good read.
Google Plus doesn't have a public API
yet, nor has it announced when one
will be available. But if you want to
find out about future developer
opportunities, Google has a mailing
list you can sign-up for to receive
more information in the future.
Taken from article linked above.
It is just released..
http://www.globinch.com/2011/09/15/google-api-released-supports-access-to-public-data/
The API itself is there - it's restful, and requires a client library for each language in order to be used.
Here is one for Java: Googl-plus-java-api
For Android developers, visit here: https://developers.google.com/+/mobile/android/
Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 14 years ago.
Improve this question
I've decided to move completely away from my old POP3 email accounts and into GMail.
I have a lot of archived mail in a Outlook 2007 .pst file.
I know I could just forward them from Outlook, but then I would receive them as only one email with a lot of attachments in GMail?
How can I move these into my GMail?
The most foolproof way I think is add your Gmail account to Outlook and move the messages within Outlook. Don't have any experience, but Google gives a lot of useful results.
I successfully moved several thousand massages from Outlook to GMail by connecting to my GMail account via IMAP and just moving them into the right folder.
I happened to export all my messages into Thunderbird first because of an article that suggested doing that then using the Google GMail Loader. But when I realized that the article predated GMail's implementation of IMAP I just configured an IMAP account in Thunderbird and did some drag-n-dropping. I'm pretty sure Outlook supports IMAP accounts so you could skip that intermediate step.
Erick -> I tried the GMail Loader but without any luck.
PEZ -> If I forward mail they will get attached at as mail to the forwarded mail and that way I will be unable to see the subject of the mails.
I think I will try adding my GMail account to Outlook and try moving everything inside Outlook.
miies's answer looks promising. If it fails maybe you can make a filter rule in outlook that forwards the messages and apply it to your mail folder.