Hi I am running running my jmx files using taurus.
execute.sh contains
bzt a.jmx
bzt b.jmx
bzt c.jmx
bzt d.jmx
my Jmx file contain trasnction controller.
eg:
-TG:
---Transaction controller
----->HTTP1
----->HTTP2
Scripts are executed sucessfully however the report "kpi.jtl" generated by the taurus does not contain the child sampler.
kpi.jtl only shows Transaction controller
I want to view the child samplers of the trasnction controller in the kpi.jtl report .
Amend your execute.sh file to look like:
bzt -o force-parent-sample=false a.jmx
bzt -o force-parent-sample=false b.jmx
bzt -o force-parent-sample=false c.jmx
bzt -o force-parent-sample=false d.jmx
More information:
Taurus: JMeter Global Settings
Navigating your First Steps Using Taurus
Related
I have a Test plan which when I run in the Gui Mode execute the sampler one time, but when I start the Test Plan from the command line I get the sampler to be running twice.
I have deleted the result.jtl file to insure that the results are not accumulated.
Without seeing your test plan it's hard or even impossible to say what's the reason as there are too many possible options, the most straightforward I can think of is:
You have a Listener (or two) somewhere in the test plan configured to write data into the same file which you specify via -l command-line argument
You have resultcollector.action_if_file_exists=APPEND property defined somewhere
So try out the following way of running the test:
jmeter -n -t test.jmx -l result.jtl -f -Jresultcollector.action_if_file_exists=DELETE
where:
-f forces JMeter to overwrite the .jtl results file
resultcollector.action_if_file_exists=DELETE property does the same for Listeners
More information:
Full list of JMeter command-line options
JMeter Properties Reference
Apache JMeter Properties Customization Guide
I am a beginner to Jmeter.My goal is to test the performance of 1000000 API requests.I have started testing in GUI mode but after reaching 5000 requests it's throwing an error.From that error I noticed that I have to run the Jmeter in Non-GUI mode to run more number of requests.I have started running in Non-GUI mode it's giving the result in summary format.I want to see which API is success and failed as in GUI mode we are able to see in view results tree listener.
You can create JMeter Dashboard to see the results. Run the test in non gui mode as below:
jmeter -n -t /path/to/testplan -l /path/to/result.jtl
once your test is complete you can use (.jtl) file to generate dashboard
run the command as below:
jmeter -g /path/to/result.jtl -o OUTPUT_FOLDER
Check the output folder --> index.html, you will see the list of API requests you have sent.
Normally when you run JMeter in command-line non-GUI mode you should specify the .jtl results file where the test output will be stored like:
jmeter -n -t test.jmx -l result.jtl
^test ^file with
plan test results
Once your test is finished you can:
Open the result.jtl (it's a normal CSV file) with MS Excel or LibreOffice Calc and analyze the results there
Open the result.jtl file with the Listener of your choice, i.e. Aggregate Report
Generate tables and/or charts you need using JMeterPluginsCMD Command Line Tool
Generate HTML Reporting Dashboard from the .jtl results file
The current setup is as follows: 4 Ubuntu boxes one master and 3 slaves. I've been encountering the following issues when executing the tests from command-line in distributed fashion.
If I execute the tests and try to generate the HTML report, JMeter attempts to create the files after each of the machines finish their runs, this causes conflicts as the first machine that finished had already created the HTML folder.
./jmeter -r -n -t ./Jmeter_Performance_PoC.jmx -l ./TestResults.csv -e -o TestResults
If I execute the tests and just generate the CSV report to then generate the HTML report from the CSV file, the report gets generated, but JMeter is not using the files full information, it is not identifying the different thread groups nor is it displaying the execution information per slave.
./jmeter -r -n -t ./Jmeter_Performance_PoC.jmx -l ./TestResults.csv
./jmeter -g ./TestResults.csv -o ./results
Is there a way of having JMeter generate the consolidated report in distributed execution without having override conflicts?
Just use __machineIP() or __machineName() as a prefix or postfix for the Thread Groups / Samplers labels - this way you (and JMeter) will be able to distinguish the results coming from the different slaves.
Check out Apache JMeter Functions - An Introduction to get familiarized with the JMeter Functions concept.
I have 5 different jmx files in my project. I need to do performance testing by running all these jmx files parallely. Currently i'm opening 5 different jmeter command prompt instance and triggering the execution.
Is there any way i can execute all these jmx files from 1 jmeter command prompt?
Depending on your operating system the options are in:
Linux: there is a parallel command, you can go for something like:
parallel --gnu << 'EOF'
jmeter -n -t test1.jmx -l result1.jtl
jmeter -n -t test1.jmx -l result2.jtl
etc.
EOF
Windows: you can create a batch script assuming start command something like:
start jmeter -n -t test1.jmx -l result1.jtl
start jmeter -n -t test2.jmx -l result2.jtl
etc.
As a cross-platform unified solution you can consider using Taurus tool as a wrapper for your JMeter script you can kick off multiple JMeter tests in parallel using simple declarative YAML syntax like:
---
execution:
- scenario:
script: test1.jmx
- scenario:
script: test2.jmx
- scenario:
script: test3.jmx
#etc
See Taurus - Working with Multiple JMeter Tests for more details.
You need to use some other tools like Ant or Maven or jenkins for that.
Please check the below link for more information:-
How to run multiple jmx scripts together in JMeter
Praveen, I don't think this is currently possible in JMeter to execute multiple .jmx files from single command , but I would suggest adding all 5 scripts in a single .jmx file if possible in your scenario.
I need to create an html report after the completing jmeter test and send it to the email. I launch jmeter via console with creating jtl log file, then I transfering it to html with
xsltproc /path/to/jmeter-results-detail.xsl $jtl > results.html
but I also have several images, which I generated from jtl file.
java -jar CMDRunner.jar --tool Reporter --generate-png test.png --input-jtl results.jtl --plugin-type ResponseTimesOverTime --width 800 --height 600
So I would like to include them in this report. Shall I change the xsl file? The file is here: http://pastebin.com/rJE4ivz8
And one more, all the information about xml->html I took from this answer https://stackoverflow.com/a/11191109/2042311 but in this template there is a date of the test, but in my html file I don't have this field.
The best thing is to use the default HTML report that is available since version 3.0 of JMeter and keeps being enriched.
To generate it just run:
jmeter -n -t TestName.jmx -l results.csv -e -o reportOutputFolder
You can also generate it from existing CSV:
jmeter -g results.csv -o reportOutputFolder
See:
https://jmeter.apache.org/usermanual/generating-dashboard.html