I have an EPS file that I want to open in Adobe Illustrator. A preview of the file rendered using the “PS View” is presented below:
The troubled file is created using Maple, and as you can see, the content is outside of the artboard! The Adobe Illustrator only takes care of what is inside the artboard, ignoring all of the outsiders that results in an empty document!
How do I re-adjust the “Bounding Box” to be able to use it in the Adobe Illustrator?
Related
I'm trying to create a small PDF file, embedding one optimized PNG image displayed as a header and footer on a 3 page PDF (same image must appear 6x in the PDF)
My optimized PNG image is only 2.3KB. It looks very sharp.
Failed with libreoffice
When I insert just one instance of the 2.3KB PNG image into a Libreoffice Writer doc containing only text, then export as PDF I can see that the image gets re-compressed to JPG and the resulting PDF file grows by about 40KB after adding the image. It also loses quality, the PNG also gets JPG fuzzy edges.
If I right click the image and select compression, there is no way to disable recompressing the image (it's already optimized better than libreoffice could do it) I've tried setting a compression level of 0,1,9 etc. Choosing JPG, no resize, lossless, etc but there was no improvement.
Failed with wkhtmltopdf
I also tried making a test page and used wkhtml2pdf but it did the same thing. Adding the low quality flag made no difference.
PDF Spec suggests PNG is supported?
From skimming the PDF spec, it looks like PNG images are supported.
Even plain text PDF files are surprisingly large
The disappointing thing is also when I take a 7KB HTML file which is basically just <html><body><p>foo...</p><p>bar...</p> (only about 15 paragraphs) with no CSS. The resulting 2 page PDF file is 30KB. Why should a 7kb (almost plain text) file become 30kb as a PDF?
Suggestions?
Can someone please suggest how to make a small PDF file in Linux?
I need to include 7KB of text and repeat one PNG image 6 times.
Manually or programatically. I'll take whatever I can get at this point.
PDF Spec suggests PNG is supported?
PNG isn't supported per se; PDF allows embedding JPEG images as-is, but not PNG images. PDF does borrow a set of features of the PNG format, however.
rinohtype (full disclosure: I'm the author) tries to embed as much as possible from PNG images as-is into the PDF. This does involve some bit-juggling to separate the alpha channel from the color data for example, but no reencoding of the image is performed. It does not (yet) support interlaced PNGs.
rinohtype should be able to do what you want to achieve. But please note that it currently is in a beta stage, so you might encounter some bugs.
Even plain text PDF files are surprisingly large
To keep the PDF size as small as possible, make sure not to embed/subset any of the fonts. Use only the fonts from the base 14 PDF fonts which are provided by PDF readers.
What you want is certainly achievable. Regarding the image quality, I would recommend making your image twice the size that you want it to actually display at in the PDF to keep it looking sharp.
As to the size, I've just modified a test in my PDF writer module (WIP..) to include a 7.2K png, 200px x 70px, in a PDF twice and the PDF came out at 6.8K 8). There's not much text included, but more text will only add what it's worth + a small percentage.
You can see the module and original test here.. https://github.com/DoccaPDF/docca-pdf-writer/blob/master/src/tests/writer.js#L40
That test adds ~112K of images to the PDF and results in a 103K PDF.
Of course not all images are created equal so you milage may vary..
*the images are only actually added to the PDF once, but are displayed multiple time.
I opened one PNG file in Inkscape and exported it as SVG. When I opened that file with notepad I came to know that the PNG file is embedded within it. If the conversion happened then the resulting file should have only SVG related tags. It shouldn't embed the image within it. Or Am I doing anything wrong.
Note: Save as option also producing the same kind of file. I am using Inkscape version 0.48 in Windows 7 - 64 bit.
This is a bit of an old thread, but it comes up early in Google so I thought I'd contribute something.
In Inkscape, you must do a trace to change the image into SVG. Look at the Path | Trace bitmap menu item and play with the options on that screen.
After creating the trace, you can remove your source image and have a pure svg in your saved file.
I've found it helpful to create layers in Inkscape and move the source image to one layer and put the trace on another layer to let me make quick comparisons using the 'hide layer' buttons.
BTW, your source image can be anything - bmp, jpg, png, etc.
A .png file is a raster image file. In order to convert it to a vector graphic based format like .svg and have it be "native" svg rather than an included image you are going to either have to use a program that can rasterize it or in Inkscape trace the bitmap and turn it into paths. Inkscape provides information on tracing: http://inkscape.org/doc/tracing/tutorial-tracing.html
I have a PNG image that I would like to turn into a layered PSD image. The image itself is mostly white space with several areas of text.
I tried to convert this PNG to a PSD but I ended up with a flat image.
I am not too versed in image processing. Is there any service that can recognize areas of white space and turn the various components of an image into layers?
Sorry png or jpeg files cannot be converted into layers . For this, you need to break the image into layers and then convert the file as .psd
Yes .PNG can be layered (from Macromedia Fireworks back in the day)
I still have about 100,000 layered files in .PNG
If I remember right Corel Draw can convert these files.
Yes, but in Adobe Fireworks CS6 .PNG format.
Save your document with the Photoshop layers in .PSD format in a folder
Open saved .PSD with Adobe Fireworks CS6
In Fireworks CS6, click 'File' then 'Save As' and select the first 'Fireworks .PNG' format option. You will notice that the name of your file will have the following extensions: [name.fw.png].
Save
PS. Never Save to "PNG level.PNG" because the layers will be unified. Just like it should not be exported to any .PNG. That is, just save the .PSD document to .FW.PNG.
I have a need to select a portion of a .png file, with specific cordinators, and delete this area then save the file back with the same name.
I would appreciate if you can help to come up with a VBScript script that can accomplish this task.
It would be great if all proesses happen in the background, but it would be ok too if the image file has to be open and visible. Thanks a bunch!!!
A PNG file, like any other binary file can be edited with CMD or VBS.
A PNG file layout is as follows:
File header
"Chunks" within the file
Pixel format
Transparency of image
Compression
Interlacing
Animation
Read the PNG format in RFC 2083 to know how to edit/create a PNG file at binary/bit level.
To speed up the editing process, libraries are available for application level editing.
Here are some VBA codes for image manipulation.
ImageMagick also provides libraries that can be accessed via VBS for image editing.
Here's a VBScript Image Class for bmp and pcx files (which PNG can be converted to before editing via WIA).
Loadpicture function described here doesn't seem to support PNG, but this discussion might solve it.
The Windows Image Acquisition Library v2.0 supports PNG, BMP, JPG, GIF and TIFF image formats, and comes with Windows Vista and later versions. Sample scripts are available to demonstrate "image manipulation using the ImageFile object". The Vector.ImageFile property also "creates an ImageFile object from raw ARGB data".
More sample codes here & here show how to rotate, flip, scale, crop, etc with WIA Image constants in vbs. To remove unwanted areas of image (with given coordinates), use the crop function.
Here's a discussion of WIA 2.0 image editing on stackoverflow.
VBScript doesn't have any image editing functions, so you need an external tool for that. For example, GIMP can do image processing from the command line (see here). ImageMagick provides a scriptable component in addition to the command-line interface (details here).
To run a command line from a VBScript script, you can use the WShShell.Run method. To create an instance of a COM scriptable component, use the CreateObject function.
In my cocoa application , I need to save each page of the pdf as a jpg .. How can i proceeed using Objective C
Using pure Objective-C (Cocoa and PDF Kit), iterate on the pages of your PDF document, and for each one, create an NSImage whose size is that of the media box of the page, lock focus on it, tell the page to draw, create an NSBitmapImageRep with the focused view (the image), unlock focus on the image, then ask the bitmap image rep for the JPEG data and write that data to the file. (This solution sucks; don't use it.)
Another way is Core Graphics and ImageIO. Create a bitmap context matching the media box and color space of the document, then for each page, create an image destination for the JPEG file, get the page from the document, draw the page in the context, create a CGImage from the context, clear the context using CGContextClearRect, add the image to the destination, and finalize the destination.