I need to add some bash shell completion with words read from a json file:
...
{
'bundle': 'R20_B1002_ORDERSB1_FROMB1',
'version':'0.1',
'envs': ['DEV','QUAL','PREPROD2'],
},
{
'bundle': 'R201_QA069_ETIQETTENS_FROMSAP',
'version': '0.1',
'envs': ['DEV','QUAL','QUAL2','PREPROD'],
}
...
To get a words list I can run this command line and it returns all expected words from my file :
grep 'bundle' liste_routes.py | sed "s/'bundle': '//" | sed "s/',//" | grep -v '#'
for instance, with an addtional "grep R20" it returns :
R20_B1002_ORDERSB1_FROMB1
R201_QA069_ETIQETTENS_FROMSAP
R202_LOG287_LIVRAISONSORTANTE_FROMLSP
R203_PP052_FULLSTOCKSAP_FROMSAP
R204_CO062_PRIXTRANSF_FROMOLGA
R206_LOG419_NOMENCLBOMPROD_FROMTDX
R207_CERTIFNFGAZ
R208_SAL363_ARTICLEPRICING_FROMSAP
R209_LOG451_WHSCON_FROMTDX
Now I put this in this compgen file and source it i my bash session.
_find_routenames()
{
search="$cur"
grep 'bundle' liste_routes.py | sed "s/'bundle': '//" | sed "s/',//" | sed "s/\r//g" | grep -v '#' | awk '{$1=$1;print}'
}
_esbdeploy_completions()
{
#local IFS=$'\n'
COMPREPLY=()
cur="${COMP_WORDS[COMP_CWORD]}"
cur="${COMP_WORDS[1]}"
COMPREPLY=( $( compgen -W "$(_find_routenames)" -- "$cur" ) )
##### COMPREPLY=($(compgen -W "$(grep 'bundle' liste_routes.py | sed \"s/'bundle': '//\" | sed \"s/',//\" | grep -v '#')" -- "${COMP_WORDS}"))
}
complete -F _esbdeploy_completions d.py
complete -F _esbdeploy_completions deploy_karaf_v4.py
complete -F _esbdeploy_completions show.py
The problem is when I type
./d.py R20<TAB>
I get thoses suggestions :
R201_QA069_ETIQETTENS_FROMSAP R203_PP052_FULLSTOCKSAP_FROMSAP R206_LOG419_NOMENCLBOMPROD_FROMTDX R208_SAL363_ARTICLEPRICING_FROMSAP
R202_LOG287_LIVRAISONSORTANTE_FROMLSP R204_CO062_PRIXTRANSF_FROMOLGA R207_CERTIFNFGAZ R209_LOG451_WHSCON_FROMTDX
It misses R20_B1002_ORDERSB1_FROMB1 from my first grep test.
I don't think it deals with the underscore , as other tests with "./d.py R10" do suggests "R10_xxxx".
Source file looks like this:
"google.com", "vuln_example1
vuln_example2
vuln_example3"
"facebook.com", "vuln_example2"
"reddit.com", "stupidly_long_vuln_name1"
"stackoverflow.com", ""
I've been trying to get the output to be something like this but the line breaks seem to cause me no end of problems. I'm using a "while read line" job to do this because I do some processing on the columns (e.g Vulnerability count and url in this example). This is output into a jenkins job (yuk).
The basic summary of the problem is getting the linebreaks in the csv to be output into the third column while retaining the table structure. I've got a sort of weird example of the desired output below.
||hostname ||Vulnerability count|| Vulnerability list || URL ||
|google.com |3 |vuln_example1 |http://cve.com/vuln_example1|
| | |vuln_example2 |http://cve.com/vuln_example2|
| | |vuln_example3 |http://cve.com/vuln_example3|
|facebook.com |1 |vuln_example2 |http://cve.com/vuln_example2|
|reddit.com |1 |stupidly_long_vuln_name1 |http://cve.com/stupidly_long_vuln_name1|
|stackoverflow.com |0 | ||
Looking at this... I've got a feeling it might be easier by showing some code and example output.
Parsing your input with the command line below makes the problem easier (I'm assuming the inputs are correct):
perl -0777 -pe 's/([^"])\s*\n/\1 /g ; s/[",]//g' < sample.txt
This line invokes Perl to perform two regex substitutions:
s/([^"])\s*\n/\1 /g: This substitution removes an end of line if it doesn't terminate by a quote " (i.e. if a host entry, with all vulnerabilities isn't yet complete).
s/[",]//g removes all quotes and commas remaining.
For each host entry like this one:
"google.com", "vuln_example1
vuln_example2
vuln_example3"
You'll get:
google.com vuln_example1 vuln_example2 vuln_example3
Then you can assume for each line, you have an host and a set of vulnerabilities.
The given example below stores vulnerabilities in an array and loop through it, formatting and printing each line:
# Replace this by your custom function
# to get an URL for a given vulnerability
function get_vuln_url () {
# This just displays a random url for an non-empty arg
[[ -z "$1" ]] || echo "http://host/$1.htm"
}
# Format your line (see printf help)
function print_row () {
printf "%-20s|%5s|%-30s|%s\n" "$#"
}
# The perl line reformat
perl -0777 -pe 's/([^"])\s*\n/\1 /g ; s/[",]//g' < sample.txt |
while read -r line ; do
arr=(${line})
print_row "${arr[0]}" "$((${#arr[#]} - 1))" "${arr[1]}" "$(get_vuln_url ${arr[1]})"
#echo -e "${arr[0]}\t|$vul_count\t|${arr[1]}\t|$(get_vuln_url ${arr[1]})"
for v in "${arr[#]:2}" ; do
print_row " " " " "$v" "$(get_vuln_url ${arr[1]})"
done
done
Output:
google.com | 3|vuln_example1 |http://host/vuln_example1.htm
| |vuln_example2 |http://host/vuln_example1.htm
| |vuln_example3 |http://host/vuln_example1.htm
facebook.com | 1|vuln_example2 |http://host/vuln_example2.htm
reddit.com | 1|stupidly_long_vuln_name1 |http://host/stupidly_long_vuln_name1.htm
stackoverflow.com | 0| |
Update.
If you don't have Perl, and if your file doesn't have tabulations, you can use this command as a workaround instead:
tr '\n' '\t' < sample.txt | sed -r -e 's/([^"])\s*\t/\1 /g' -e 's/[",]//g' -e 's/\t/\n/g'
tr '\n' '\t' replaces all ends of line by tabulations
sed part acts like Perl line, except it deals with tabulations instead of ends of line and restores tabulations back to ends of line.
For example I have a file test.json that contains a series of line containing:
header{...}
body{...}
other text (as others)
empty lines
I wanted to run a script that returns the following
Counted started on : test.json
- headers : 4
- body : 5
- <others>
Counted finished : <time elapsed>
What I got so far is this.
count_file() {
echo "Counted started on : $1"
#TODO loop
cat $1 | grep header | wc -l
cat $1 | grep body | wc -l
#others
echo "Counted finished : " #TODO timeElapsed
}
Edit:
Edit question and added code snippet
Perl on Command Line
perl -E '$match=$ARGV[1];open(Input, "<", $ARGV[0]);while(<Input>){ ++$n if /$match/g } say $match," ",$n;' your-file your-pattern
For me
perl -E '$match=$ARGV[1];open(Input, "<", $ARGV[0]);while(<Input>){ ++$n if /$match/g } say $match," ",$n;' parsing_command_line.pl my
It counts how many number of pattern my are, in my script parsing_command_line.pl
output
my 3
For you
perl -E '$match=$ARGV[1];open(Input, "<", $ARGV[0]);while(<Input>){ ++$n if /$match/g } say $match," ",$n;' test.json headers
NOTE
Write all code in one line on your command prompt
First argument is your file
Second is your pattern
This is not a complete code since you have to enter all your pattern one-by-one
You can capture the result of a commande in a variable, like:
result=`cat $1 | grep header | wc -l`
and then print the result:
echo "# headers : $b"
` is the eval operator that let replace the whole expression by the output of the command inside.
I have a file in Unix, with data sample like the following:
{"ID":"123", "Region":"Asia", "Location":"India"}
{"ID":"234", "Region":"APAC", "Location":"Australia"}
{"ID":"345", "Region":"Americas", "Location":"Mexio"}
{"ID":"456", "Region":"Americas", "Location":"Canada"}
{"ID":"567", "Region":"APAC", "Location":"Japan"}
The desired output is
ID|Region|Location
123|Asia|India
234|APAC|Australia
345|Americas|Mexico
456|Americas|Canada
567|APAC|Japan
I tried with a few sed commands. I could remove the following: '{', '}', ' " ', ':'
There are 2 issues with the output file
All rows from input appear in single line in the output.
Adding the pipe ('|') as delimiter.
Any pointers are highly appreciated.
I recommend the tool jq (http://stedolan.github.io/jq/); jq is a lightweight and flexible command-line JSON processor.
jq -r '"\(.ID)|\(.Region)|\(.Location)"' < infile
123|Asia|India
234|APAC|Australia
345|Americas|Mexio
456|Americas|Canada
567|APAC|Japan
Explanation
-r is --raw-output
Through awk,
awk -F'"' -v OFS="|" 'BEGIN{print "ID|Region|Location"}{print $4,$8,$12}' file
Example:
$ cat file
{"ID":"123", "Region":"Asia", "Location":"India"}
{"ID":"234", "Region":"APAC", "Location":"Australia"}
{"ID":"345", "Region":"Americas", "Location":"Mexio"}
{"ID":"456", "Region":"Americas", "Location":"Canada"}
{"ID":"567", "Region":"APAC", "Location":"Japan"}
$ awk -F'"' -v OFS="|" 'BEGIN{print "ID|Region|Location"}{print $4,$8,$12}' file
ID|Region|Location
123|Asia|India
234|APAC|Australia
345|Americas|Mexio
456|Americas|Canada
567|APAC|Japan
EXplanation:
-F'"' Sets " as Field Separator value.
OFS="|" Sets | as Output Field Separator value.
Atfirst, awk would execute the function inside the BEGIN block. It helps to print the header section.
This sed one-liner does what you want. It's capturing the field values using parenthesized expressions, and then putting them into the output using \1, \2, and \3.
s/^{"ID":"\([^"]*\)", "Region":"\([^"]*\)", "Location":"\([^"]*\)"}$/\1|\2|\3/
Invoke it like:
$ sed -f one-liner.sed input.txt
Or you can invoke it within a Bash script, producing the header:
echo 'ID|Region|Location'
sed -e 's/^{"ID":"\([^"]*\)", "Region":"\([^"]*\)", "Location":"\([^"]*\)"}$/\1|\2|\3/' $input
It is a JSON file so it is best to use a JSON parser. Here is a perl implementation of it.
#!/usr/bin/perl
use strict;
use warnings;
use JSON;
open my $fh, '<', 'path/to/your/file';
#keys of your structure
my #key = qw(ID Region Location);
print join ("|", #key), "\n";
#iterate over your file, decode it and print in order of your key structure
while (my $json = <$fh>) {
my $text = decode_json($json);
print join ("|", map { $$text{$_} } #key ),"\n";
}
Output:
ID|Region|Location
123|Asia|India
234|APAC|Australia
345|Americas|Mexio
456|Americas|Canada
567|APAC|Japan
Using sed as follows
Command line
echo "my_string" |
sed -e 's#[,:"{}]##g' -e 's#ID##g' -e "s#Region##g" -e 's#Location##g' \
-e '1 s#^.*$#ID Region Location\n&#' -e 's# #|#g'
or
sed -e 's#[,:"{}]##g' -e 's#ID##g' -e "s#Region##g" -e 's#Location##g' \
-e '1 s#^.*$#ID Region Location\n&#' -e 's# #|#g' my_file
I tried this in a terminal as follows:
echo '{"ID":"123", "Region":"Asia", "Location":"India"}
{"ID":"234", "Region":"APAC", "Location":"Australia"}
{"ID":"345", "Region":"Americas", "Location":"Mexio"}
{"ID":"456", "Region":"Americas", "Location":"Canada"}
{"ID":"567", "Region":"APAC", "Location":"Japan"}' |
sed -e 's#[,:"{}]##g' -e 's#ID##g' -e "s#Region##g" -e 's#Location##g' \
-e '1 s#^.*$#ID Region Location\n&#' -e 's# #|#g'
Output
ID|Region|Location
123|Asia|India
234|APAC|Australia
345|Americas|Mexio
456|Americas|Canada
567|APAC|Japan
Many thanks for your response and the pointers/ solutions did help a lot.
For some mysterious reasons, I couldn't get any sed commands work. So, I devised my own solution. Although it's not elegant, it's still worked.
Here is the script I prepared which resolved the issue.
#!/bin/bash
# ource file path.
infile=/home/exfile.txt
# remove if these temp file exist already.
rm ./efile.txt ./xfile.txt ./yfile.txt ./zfile.txt
# removing the curly braces from input file.
cat exfile.txt | cut -d "{" -f2 | cut -d "}" -f1 >> ./efile.txt
# setting input file name to different value.
infile=./efile.txt
# remove double quotes from the file.
while IFS= read -r line
do
echo $line | sed 's/\"//g' >> ./xfile.txt
done < "$infile"
# creating another temp file.
infile2=./xfile.txt
# remove colon from file.
while IFS= read -r line
do
echo $line | sed 's/\:/,/g' >> ./yfile.txt
done < "$infile2"
# set input file path to new temp file.
infile3=yfile.txt
# initialize variables to hold header column values.
t1=0
t3=0
t5=0
# read each of the line to extract header row. Exit loop after reading 1st row.
once=1
while IFS=',' read -r f1 f2 f3 f4 f5 f6
do
"$f1 $f2 $f3 $f4 $f5 $f6"
t1=$f1
t3=$f3
t5=$f5
if [ "$once" -eq 1 ]; then
break
fi
done < "$infile3"
# Read each of the line from input file. Write only the value to another output file.
while IFS=',' read -r f1 f2 f3 f4 f5 f6
do
echo "$f2|$f4|$f6" >> ./zfile.txt
done < "$infile3"
# insert the header column row into the file generated in the step above.
frstline="$t1|$t3|$t5"
sed -i '1i ID|Region|Location' ./zfile.txt
I have the following log file which contains lines like this
1345447800561|FINE|blah#13|txReq
1345447800561|FINE|blah#13|Req
1345447800561|FINE|blah#13|rxReq
1345447800561|FINE|blah#14|txReq
1345447800561|FINE|blah#15|Req
I am trying extract the first field from each line and depending on whether it belongs to blah#13 or blah#14, blah#15 i am creating the corresponding files using the following script, which seems quite in-efficient in terms of the number of temp files creates. Any suggestions on how I can optimize it ?
cat newLog | grep -i "org.arl.unet.maca.blah#13" >> maca13
cat newLog | grep -i "org.arl.unet.maca.blah#14" >> maca14
cat newLog | grep -i "org.arl.unet.maca.blah#15" >> maca15
cat maca10 | grep -i "txReq" >> maca10TxFrameNtf_temp
exec<blah10TxFrameNtf_temp
while read line
do
echo $line | cut -d '|' -f 1 >>maca10TxFrameNtf
done
cat maca10 | grep -i "Req" >> maca10RxFrameNtf_temp
while read line
do
echo $line | cut -d '|' -f 1 >>maca10TxFrameNtf
done
rm -rf *_temp
Something like this ?
for m in org.arl.unet.maca.blah#13 org.arl.unet.maca.blah#14 org.arl.unet.maca.blah#15
do
grep -i "$m" newLog | grep "txReq" | cut -d' ' -f1 > log.$m
done
I've found it useful at times to use ex instead of grep/sed to modify text files in place without using temps ... saves the trouble of worrying about uniqueness and writability to the temp file and its directory etc. Plus it just seemed cleaner.
In ksh I would use a code block with the edit commands and just pipe that into ex ...
{
# Any edit command that would work at the colon prompt of a vi editor will work
# This one was just a text substitution that would replace all contents of the line
# at line number ${NUMBER} with the word DATABASE ... which strangely enough was
# necessary at one time lol
# The wq is the "write/quit" command as you would enter it at the vi colon prompt
# which are essentially ex commands.
print "${NUMBER}s/.*/DATABASE/"
print "wq"
} | ex filename > /dev/null 2>&1